What's the difference between geothermal and oil/gas equipment?
Many oilfield technologies transfer directly to geothermal: drilling rigs, casing, cementing, well completion. The main differences are: (1) high temperatures —geothermal wells produce 150–200°C+ fluids, which requires special downhole materials (standard oilfield equipment fails at these temperatures), (2) corrosive brine —geothermal fluid often contains corrosive gases and minerals, requiring corrosion-resistant materials, (3) reinjection —produced geothermal water must be reinjected (not disposed), requiring injection wells. Tell us your geothermal project, and we will specify suitable equipment.
What temperature do I need for power generation?
For direct steam power generation: 180°C+ (dry steam or flash steam plants). For binary cycle (ORC) power generation: 90–180°C. Below 90°C: direct use only (heating, industrial use). Binary cycle plants can use lower-temperature resources that wouldn't work for steam turbines. The lower temperature threshold for economic power generation keeps dropping as binary cycle technology improves. Tell us your reservoir temperature, and we will advise on the best power generation approach.
What is EGS (Enhanced Geothermal Systems)?
EGS (Enhanced Geothermal Systems) creates artificial geothermal reservoirs in hot, dry rock where natural permeability is too low. The process: drill wells into hot rock, create fractures (hydraulic stimulation), then circulate water through the fractures to extract heat. EGS can be developed almost anywhere (not just volcanic regions). It uses oil and gas industry technology: drilling, fracturing, well completion. EGS is the future of geothermal —unlocking enormous untapped resources. We supply equipment for EGS demonstration projects.
How deep do geothermal wells go?
It depends on the application: (1) shallow direct use: 50–100 m, (2) medium-depth direct use/heat pumps: 1,000–2,000 m, (3) deep geothermal power: 2,000–3,000+ m. Deep geothermal wells reach the high-temperature zones needed for power generation. The depth needed depends on the local geothermal gradient (how quickly temperature increases with depth). Tell us your local geology and temperature target, and we will help plan the well depth.
Can oilfield drilling rigs be used for geothermal?
Yes! Many land drilling rigs can be adapted for geothermal drilling. The main considerations are: (1) depth capability —geothermal wells often need deeper drilling than oil/gas wells in the same area, (2) high-temperature mud systems —standard drilling muds need to handle higher downhole temperatures, (3) hard rock drilling —geothermal formations are often hard crystalline rock. Our drilling rigs are suitable for geothermal applications. Tell us your well design, and we will recommend the right rig.