API | ISO | GB | Industry Best Practice

Oilfield Equipment Manufacturing Standards

Oilfield equipment must meet strict manufacturing standards to ensure safety, reliability, and performance. Our equipment is designed and built to internationally recognized standards —from API specifications and ISO management systems to Chinese national (GB) standards. This page explains the key standards that govern our manufacturing process and what they mean for you as a buyer.

Key Standards We Follow

Our manufacturing follows multiple layers of standards —product specifications, management systems, and material standards:

API Specifications (Product Standards)

API (American Petroleum Institute) specifications define design, materials, testing, and performance requirements for specific equipment types. API Spec 6A (wellhead), 7K (drilling equipment), 16A (BOPs), 8C (hoisting equipment) are the most relevant. These are the global industry benchmark.

ISO Standards (Management Systems)

ISO (International Organization for Standardization) standards define management system requirements. ISO 9001 (quality), 14001 (environment), and 45001 (safety) certify our overall management processes. These ensure consistent quality, environmental responsibility, and worker safety.

GB Standards (Chinese National Standards)

GB (Guobiao) are Chinese national standards. Many Chinese oilfield equipment standards are harmonized with API and ISO. Our equipment meets both GB standards (for domestic market) and API/ISO standards (for export). Dual compliance is standard.

NACE / MR0175 (Sour Service)

NACE MR0175 / ISO 15156 defines material requirements for H2S-bearing (sour) service. For sour service applications, all wetted materials must meet this standard. We supply NACE-compliant equipment for sour service operations.

Design Standards We Apply

Engineering design follows recognized industry codes and standards:

Standard / Code Applies To Purpose
ASME BPVC Section VIII Pressure vessels, tanks Design and fabrication of pressure-containing equipment
ASME B16.5 / B16.34 Flanges, valves Dimensional and pressure rating standards for flanged connections
API 650 Storage tanks Design and fabrication of vertical steel storage tanks
API 610 Centrifugal pumps Design and performance of centrifugal pumps for petroleum service
NFPA 20 Fire pump systems Installation of stationary fire pumps for petroleum facilities

Material Standards

All materials used in our equipment meet recognized material standards:

Steel Plate & Pipe

Steel plate and pipe meet ASTM (American Society for Testing and Materials) standards or equivalent GB standards. Material grades are selected based on application, pressure rating, and temperature requirements. Material test reports (MTRs) are provided for all critical materials.

Welding Standards

Welding follows AWS (American Welding Society) standards and ASME BPVC welding requirements. Weld procedures are qualified (WPS / WPQR). Welders are certified. Weld inspection includes visual, radiographic (RT), ultrasonic (UT), and magnetic particle (MT) testing as required.

Bolting & Fasteners

Bolting and fasteners meet ASTM standards (A193, A320, etc.). Material grade and coating are specified based on application. Critical bolting is traceable with material certificates.

Seals & Gaskets

Seals and gaskets are selected based on fluid compatibility, temperature, and pressure. Materials include NBR, FKM, EPDM, PTFE, and specialized compounds. All seals meet industry standards for the intended service.

Testing & Inspection Standards

Every unit we produce undergoes testing per industry standards:

Hydrostatic Pressure Testing

All pressure-containing equipment undergoes hydrostatic pressure testing at 1.5x working pressure (per API/ASME standards). Test duration and acceptance criteria follow the relevant specification. No leaks or deformation allowed.

Pneumatic / Leak Testing

Selected equipment undergoes pneumatic leak testing at working pressure. Soap bubble test or electronic leak detection. Ensures no leaks at operating pressure.

Functional Testing

Complete functional testing of all operating systems: engines, pumps, controls, valves, safety systems. Verifies that everything operates as designed and specified.

NDT (Non-Destructive Testing)

Critical welds undergo NDT: radiographic testing (RT), ultrasonic testing (UT), magnetic particle testing (MT), or liquid penetrant testing (PT). Per ASME and API requirements. Ensures weld integrity.

Frequently Asked Questions

What standards does your equipment meet?

Our equipment meets multiple layers of standards: (1) API product specifications (Spec 6A, 7K, 16A, 8C, etc.) for product design and performance, (2) ISO management system standards (9001, 14001, 45001) for our overall manufacturing processes, (3) GB (Chinese national) standards for domestic market compliance, and (4) industry codes like ASME for pressure vessels and piping. For sour service, we also meet NACE MR0175 / ISO 15156.

Do you provide material test reports (MTRs)?

Yes. We provide material test reports for all critical pressure-containing components. MTRs show material grade, heat number, chemical composition, mechanical properties, and compliance with the relevant standard. MTRs are provided in both hard copy and digital format with your equipment documentation package.

What pressure testing do your units undergo?

All pressure-containing equipment undergoes hydrostatic pressure testing at 1.5x the rated working pressure, per API and ASME standards. Test duration is typically 10–15 minutes. Acceptance criteria: no leaks, no visible deformation, pressure drop within acceptable limits. Test certificates are provided with every unit.

Can you build equipment to a custom standard?

Yes. If your project requires compliance with a specific national standard (e.g., GOST for Russia/CIS, BS for UK, DIN for Germany), we can design and build equipment to that standard. We have experience with multiple national standards. Tell us the applicable standard for your project, and we will design accordingly.

How do I know your equipment actually meets these standards?

You can verify through: (1) our complete documentation package (MTRs, test reports, certificates), (2) third-party inspection (SGS, BV, ABS) before shipment, (3) customer facility audits (in person or via video), and (4) witnessed FAT. We're transparent about our processes and welcome verification. We stand behind the standards we claim.

Need Equipment Built to Specific Standards?

Tell us what standards your project requires (API, ISO, GOST, NACE, etc.). Our engineering team will confirm applicability and provide documentation for your project requirements.