Heavy Oil | Thermal Recovery | SAGD | Steam Injection

Heavy Oil Recovery Equipment

Heavy oil and extra-heavy oil (bitumen) are among the world's largest untapped hydrocarbon resources —but they're also the most challenging to produce. Heavy oil doesn't flow naturally; it needs thermal stimulation (steam, heat) or special lifting equipment to be produced. Our heavy oil recovery equipment is specifically designed for these demanding applications: thermal recovery, SAGD (Steam-Assisted Gravity Drainage), steam injection, and heavy oil artificial lift.

Heavy Oil Recovery Methods

Different heavy oil resources require different recovery methods:

Primary Recovery (Cold Production)

Some heavy oil reservoirs have enough energy to produce cold (without heat). Uses artificial lift (pumping units, ESPs, PCPs) to lift heavy oil to the surface. Recovery factor is typically low (5–10%). Suitable for lighter heavy oil (10–20° API).

Steam Injection (Cyclic Steam Stimulation)

Steam is injected into the well to heat the oil, reduce viscosity, and improve flow. After a soak period, the well produces hot oil. CSS (Cyclic Steam Stimulation) is widely used for heavy oil recovery. Uses steam generators and injection equipment.

SAGD (Steam-Assisted Gravity Drainage)

Two horizontal wells: one upper well injects steam, one lower well produces heated oil. Steam chamber grows over time, oil drains by gravity. SAGD is the most effective method for extra-heavy oil and bitumen. Used in oil sands (Canada, Venezuela).

Other Thermal Methods

Fire flooding (in-situ combustion), electromagnetic heating, solvent-based methods. Each method has specific equipment requirements. We supply equipment for various heavy oil recovery methods.

Heavy Oil Equipment We Supply

Comprehensive equipment for heavy oil recovery operations:

Heavy Duty Pumping Units

Extra-heavy duty beam pumping units for heavy oil artificial lift. Larger capacity, longer stroke, built for the high lifting loads of heavy oil production. API 11E certified. Suitable for heavy oil SAGD and thermal recovery.

Steam Generation Equipment

Steam generators (once-through steam generators, OTSG) for SAGD and CSS operations. 100–200 tonne/hour capacity, high-pressure steam (10–15 MPa). Designed for heavy oil thermal recovery projects.

Steam Injection Equipment

High-pressure steam injection pumps, injection wellheads, and surface piping. Rated for high-temperature, high-pressure steam service. For SAGD and cyclic steam stimulation operations.

Heavy Oil Handling Equipment

Heated storage tanks, heavy oil pumps, heat exchangers, and desanders. For handling heavy oil at the surface: heating, storing, and transporting heavy crude. Designed for high-viscosity oil.

Heavy Oil Production Challenges

Why heavy oil needs special equipment:

High Viscosity

Heavy oil has very high viscosity (1,000–10,000+ cP). It doesn't flow naturally. Needs heat to reduce viscosity or special lifting equipment. Standard production equipment won't handle heavy oil effectively.

High Lifting Load

Heavy oil weighs more than conventional oil. Rod string weight + heavy oil column = very high lifting load. Needs extra-heavy pumping units and strong rods. This stresses equipment more than conventional oil production.

High Temperature

Thermal recovery produces oil at 200–300°C. Surface equipment must handle high temperatures: heated tanks, insulated piping, high-temperature gaskets and seals. Standard equipment won't survive these temperatures.

Sand Production

Heavy oil reservoirs often produce sand along with oil. Sand causes abrasion and wear on pumps and equipment. Need sand handling equipment (desanders, separators) and abrasion-resistant components.

Major Heavy Oil Regions

Our heavy oil equipment is suitable for major heavy oil basins:

Canada Oil Sands

Athabasca, Cold Lake, Peace River —world's largest bitumen deposits. SAGD is the primary recovery method. We supply SAGD production equipment.

Venezuela Orinoco

Orinoco Belt —world's largest extra-heavy oil deposit. CSS and SAGD recovery methods. We supply heavy oil recovery equipment.

China Heavy Oil

Liaohe, Xinjiang, Dagang —major Chinese heavy oil production areas. Thermal recovery methods widely used. Our equipment is proven in Chinese heavy oil fields.

Middle East Heavy Oil

Saudi Arabia, Kuwait, Oman —growing heavy oil production. Thermal recovery and SAGD projects. We supply equipment for Middle East heavy oil operations.

Russia Heavy Oil

Tatarstan, Siberia —Russian heavy oil resources. Thermal recovery and cold heavy oil production. We supply equipment for Russian heavy oil projects.

Other Heavy Oil Regions

USA (California, Wyoming), Indonesia, Venezuela, Colombia. Tell us your location, and we will configure accordingly.

Frequently Asked Questions

What's the difference between heavy oil and conventional oil?

Heavy oil has higher viscosity and density than conventional oil. Conventional oil flows naturally at reservoir conditions. Heavy oil (10–20° API) is thick and doesn't flow easily. Extra-heavy oil / bitumen (below 10° API) is almost solid at surface conditions. Heavy oil needs thermal recovery (steam, heat) or special lifting equipment to produce. It's more challenging and more expensive to produce than conventional oil, but represents enormous resources.

What is SAGD and what equipment does it need?

SAGD (Steam-Assisted Gravity Drainage) is a thermal recovery method for heavy oil/bitumen. Two parallel horizontal wells are drilled: the upper well injects steam, the lower well produces heated oil. Steam chamber grows over time. SAGD needs: steam generators (OTSG), steam injection equipment, production tubing, heavy duty pumping units, heated surface facilities. We supply equipment for SAGD operations.

What pumping unit size do I need for heavy oil?

Heavy oil needs larger pumping units than conventional oil because: (1) heavy oil weighs more, (2) high viscosity creates more friction, (3) high lifting loads. A typical heavy oil well might need a 228-style or 320-style pumping unit vs. a 64 or 80 for conventional oil. Tell us your well depth, production rate, and oil gravity, and we will recommend the right pumping unit size. SAGD wells typically need the largest units.

Can you supply complete SAGD surface facilities?

We supply major SAGD surface equipment: steam generators, injection pumps, pumping units, heated tanks, heat exchangers, and surface piping. For complete SAGD facilities, we work with EPC contractors who handle the overall project. We supply the equipment you need —tell us your project scope, and we will quote the equipment package.

What's the typical recovery factor for heavy oil?

Recovery factors vary by method: primary (cold) recovery: 5–10%. CSS (cyclic steam stimulation): 15–25%. SAGD: 50–70%. SAGD is the most effective method for extra-heavy oil and bitumen. The choice of recovery method depends on reservoir characteristics, oil quality, and economics. Tell us your reservoir data, and we will discuss the best recovery method for your resource.

Need Heavy Oil Recovery Equipment?

Tell us about your heavy oil project: oil gravity, well depth, recovery method, and production rate. Our engineering team will design the right equipment package for your heavy oil application.