Unconventional | Multi-Stage Fracturing

Shale Oil & Gas Equipment

Shale oil and gas operations require specialized equipment: high-rate, high-pressure fracturing units for multi-stage stimulation, coiled tubing units for plug drill-out, and cementing trucks for horizontal well cementing. We supply a complete range of equipment for unconventional shale plays —from the Vaca Muerta to the Sichuan Basin.

Shale Operations Unique Challenges

Shale oil and gas operations present unique challenges compared to conventional oil and gas production.

Horizontal Drilling & Multi-Stage Fracturing

Shale reservoirs are produced through horizontal wells with multi-stage hydraulic fracturing. This requires high-rate, high-pressure fracturing equipment capable of pumping large volumes of proppant and fluid at high pressure.

High Rate & High Pressure

Shale fracturing requires high pumping rates (typically 60–100+ bbl/min per well) and high pressures (60–100+ MPa). Equipment must handle high proppant concentrations and continuous operation for extended periods.

Plug Drill-Out Operations

After fracturing, composite plugs need to be drilled out to establish well flow. Coiled tubing units are used for this operation —they can reach the toe of horizontal wells and drill out plugs efficiently.

Batch Operations & Efficiency

Shale operations are highly optimized for efficiency. Multiple wells are drilled and fractured from a single pad (batch drilling / pad development). Equipment needs to be mobile and efficient for batch operations.

Key Equipment for Shale Operations

These are the critical equipment types for unconventional shale oil and gas operations.

High-Rate Fracturing Units

Truck-mounted fracturing units with high horsepower (2,500–3,000 hp) and high pressure rating. Designed for continuous multi-stage fracturing operations. Multiple units working together as a fracturing spread.

Fracturing Blender Units

Blender units that mix proppant (sand) with fracturing fluid at precise concentrations. Critical for delivering consistent slurry to the formation. Available in various capacity configurations.

Coiled Tubing Units

CT units for plug drill-out, well cleanout, and intervention in horizontal shale wells. Capable of reaching the toe of long horizontal laterals. Various coil diameters and lengths available.

Cementing Trucks

Cementing trucks for horizontal well cementing operations. High-capacity cementing units capable of cementing long horizontal sections reliably.

Major Shale Plays We Support

We have experience supplying equipment for major shale plays around the world.

Vaca Muerta (Argentina)

South America's largest shale oil and gas play. Multi-stage fracturing operations in the Neuquñn Basin. Experience with Patagonian cold-climate requirements.

Sichuan Basin (China)

Major shale gas play in southwest China. Deep shale gas wells with high pressure and high temperature requirements. Experience with deep shale operations.

Wolfcamp / Permian (USA)

The largest shale oil play in the United States. Multi-well pad development, high-intensity fracturing operations. We understand the operational model.

Bowen / Surat (Australia)

Major coal seam gas and shale gas plays in eastern Australia. Experience with Australian regulatory and operational requirements.

West Siberian Shale (Russia)

Russian shale oil and gas resources. Cold-climate equipment requirements and GOST documentation. Experience with Russian market requirements.

Other Emerging Shale Plays

We also support emerging shale plays in other regions. Contact us to discuss your specific shale project requirements.

Typical Shale Fracturing Equipment Specs

Standard specifications for shale fracturing operations:

Parameter Typical Range Notes
Pumping Rate 60–100+ bbl/min (per stage) Multiple units working together
Working Pressure 60–100+ MPa (8,700–14,500 psi) Depends on well depth and formation
Proppant Concentration 0.5–4.0+ kg/L (5–35 ppa) Increases during stage treatment
Stages per Well 20–60+ stages Horizontal well multi-stage fracturing
Laterals Length 1,500–3,000+ m Horizontal section length

Frequently Asked Questions

What equipment do I need for shale oil and gas operations?

The critical equipment for shale operations includes: (1) high-rate, high-pressure fracturing units for multi-stage stimulation, (2) fracturing blender units for proppant mixing, (3) coiled tubing units for plug drill-out and well cleanout, and (4) cementing trucks for horizontal well cementing. Depending on your operation, you may also need workover rigs, flammable gas detection systems, and water handling equipment. Tell us your operation type and well program, and we will recommend the right equipment package.

How many fracturing units do I need for a shale well?

The number of fracturing units depends on the desired pumping rate and the horsepower per unit. A typical shale fracturing spread uses 6–12 fracturing units working together, depending on the well depth, target rate, and formation characteristics. Each unit typically provides 2,000–3,000 hp. The total spread horsepower might range from 15,000–20,000+ hp for a typical shale well. We can help you calculate the right number of units for your specific well design.

Why are coiled tubing units needed for shale operations?

After multi-stage fracturing, composite frac plugs are left in the well to isolate stages during fracturing. After all stages are fractured, these plugs need to be drilled out to establish full-bore flow. Coiled tubing units are the standard method for plug drill-out —they can reach the toe of long horizontal laterals efficiently and drill out plugs with a downhole motor. CT units are also used for well cleanout and production logging in horizontal shale wells.

Do you have experience with deep shale gas operations?

Yes. We have experience with deep shale gas operations, including the Sichuan Basin deep shale gas plays. Deep shale operations require higher pressure ratings (100+ MPa) and higher temperature ratings. Our equipment is available in configurations suitable for deep, high-pressure, high-temperature shale gas applications. Tell us your well depth and expected treating pressure, and we will recommend the right equipment.

Can you supply a complete shale operation equipment package?

Yes. We can supply a complete equipment package for shale operations: fracturing units, blender units, coiled tubing units, cementing trucks, and support equipment. We work with you to design the right equipment package for your specific shale play and operation model. We also provide training, spare parts, and field service support. Contact us to discuss your project requirements.

Need Shale Oil & Gas Equipment?

Tell us about your shale play, well design (depth, lateral length), and fracturing program (number of stages, target rate). Our engineers will help you specify the right equipment package for your unconventional operation.