H2S Resistant | NACE MR0175

Sour Service Oilfield Equipment

For wells producing hydrogen sulfide (H2S), standard oilfield equipment will fail. Sulfide stress cracking (SSC) can cause catastrophic failure of carbon steel components. We supply NACE MR0175 / ISO 15156 compliant sour service equipment —from cementing units and workover rigs to wellhead and pressure control products —designed and certified for H2S-bearing service.

What Is Sour Service? Why Does It Matter?

Sour service means the well produces fluids containing hydrogen sulfide (H2S). This toxic gas doesn't just present a safety hazard —it also attacks steel.

Sulfide Stress Cracking (SSC)

H2S in the presence of water causes sulfide stress cracking in carbon steel. Hydrogen atoms enter the steel lattice, causing embrittlement and cracking. This can lead to catastrophic failure of wellhead, valves, tubulars, and equipment —even at pressures below the rated working pressure.

Hydrogen Induced Cracking (HIC)

H2S can also cause hydrogen induced cracking (HIC) —internal blistering and cracking of steel, particularly in welds and heat-affected zones. This is especially dangerous in pressure vessels and piping.

Safety Hazard

H2S is extremely toxic —fatal at concentrations above 500 ppm. Even low concentrations are dangerous. Sour service operations require additional safety measures: H2S monitoring, breathing apparatus, and emergency response procedures.

NACE MR0175 Standard

NACE MR0175 / ISO 15156 is the international standard for materials used in H2S-bearing oil and gas production. It specifies material requirements, heat treatment, hardness limits, and testing to prevent SSC and HIC.

Our Sour Service Equipment Range

We supply a complete range of NACE MR0175 compliant sour service equipment.

Sour Service Wellhead & Christmas Tree

Wellhead and Christmas tree equipment with NACE MR0175 compliant materials. Special steel grades, controlled hardness, and certified weld procedures. Available in 35 MPa, 70 MPa, and 105 MPa pressure ratings.

Sour Service Valves & Fittings

Gate valves, check valves, choke valves, and flanges with NACE MR0175 trim and body materials. Designed for H2S service with proper material selection and heat treatment.

Sour Service Cementing Units

Cementing units configured for sour service operations. All wetted components in contact with H2S fluids use NACE-compliant materials. Additional H2S safety monitoring on the unit.

Sour Service Workover Rigs

Workover rigs configured for sour well intervention. Special handling equipment for H2S service, additional H2S monitoring on the rig floor, and safety systems for sour operations.

H2S Concentration Levels & Material Requirements

Sour service requirements depend on the H2S partial pressure and pH of the produced fluids.

Category H2S Partial Pressure Material Requirements
Sour Service (General) > 0.05 psi (0.00035 MPa) NACE MR0175 compliant materials required
Moderate Sour 0.05–5 psi Standard NACE materials, hardness < 22 HRC
Severe Sour 5–100 psi Special sour service materials, higher alloy content
Extreme Sour > 100 psi High alloy materials, special heat treatment, extensive testing

Typical Sour Service Applications

Sour service equipment is required in many oil and gas producing regions around the world.

Middle East Sour Gas Fields

Major sour gas fields in Saudi Arabia, UAE, and Qatar produce high-H2S gas. All equipment in these fields must be NACE MR0175 compliant.

North Sea Sour Operations

Some North Sea fields produce H2S-containing fluids. Sour service equipment is required for these operations, with additional offshore safety considerations.

Canada Sour Gas

Alberta and Saskatchewan have major sour gas production. Sour service wellhead, completion, and workover equipment is standard in these operations.

Caspiansour Fields

Some Caspian region fields produce H2S-containing oil and gas. Sour service equipment is required for these mature field operations.

Frequently Asked Questions

How do I know if my well needs sour service equipment?

If your produced fluids contain more than 0.05 psi (0.00035 MPa) H2S partial pressure, the well is considered "sour" and requires NACE MR0175 compliant equipment. Most operators test produced fluids for H2S content during exploration and appraisal. Tell us your H2S concentration and well pressure, and we will recommend the appropriate sour service equipment class.

What does "NACE MR0175 compliant" mean?

NACE MR0175 / ISO 15156 is the international standard for materials used in H2S-bearing oil and gas production. It specifies material selection, heat treatment, hardness limits, and testing requirements to prevent sulfide stress cracking (SSC) and hydrogen induced cracking (HIC). NACE compliant equipment uses special steel grades, controlled hardness (typically below 22 HRC for carbon steel), and certified weld procedures.

Can you upgrade standard equipment to sour service?

It depends on the equipment. For pressure-containing components (valves, wellhead, piping), the material is fixed at manufacturing —you can't "upgrade" standard carbon steel to NACE compliant. You need equipment that was manufactured from NACE-compliant materials from the start. For surface equipment like cementing units or workover rigs, we can configure the wetted components in NACE materials while keeping the structural components in standard carbon steel.

What additional safety measures are needed for sour service operations?

Sour service operations require additional safety measures: continuous H2S gas monitoring on location, personal H2S monitors for all personnel, breathing apparatus and escape packs, and trained emergency response teams. Operators also need proper H2S safety training for all personnel. We can recommend the safety systems needed for your specific sour operation.

Do your sour service equipment come with NACE certification?

Yes. All our sour service equipment comes with complete NACE MR0175 / ISO 15156 documentation: material test reports (MTRs), hardness test results, heat treatment records, and weld procedure specifications. Third-party inspection and certification (SGS, BV, etc.) can be arranged on request. We provide complete traceability for every sour service component.

Need Sour Service Equipment for H2S-Bearing Wells?

Tell us your H2S concentration, well pressure, and equipment requirements. Our engineers will help you specify the right NACE MR0175 compliant equipment for your sour service operation.