Glossary | Industry Terms & Definitions

Oilfield Equipment Glossary

The oil and gas industry has its own language —hundreds of technical terms, abbreviations, and slang that can be confusing if you're not familiar with them. This glossary defines the most common oilfield equipment and industry terms you'll encounter when researching, specifying, or buying oilfield equipment. Whether you're a buyer, engineer, or new to the industry, this glossary will help you understand the terminology.

Common Oilfield Equipment Terms

Definitions of key equipment and industry terms:

A

API (American Petroleum Institute) —The primary industry body that develops and publishes standards for oil and gas equipment and operations. API specifications are the global industry benchmark.

Blowout Preventer (BOP) —A large valve assembly installed at the wellhead to prevent uncontrolled flow of oil or gas (a "blowout"). Critical safety equipment for drilling and workover operations.

B

Barrel (bbl) —The standard unit of volume in the oil industry. One barrel = 42 US gallons =?159 liters. Oil production and reserves are measured in barrels.

Brine —Saltwater used as completion fluid or drilling fluid. Brine weight is controlled by dissolved salt concentration.

C

Casing —Steel pipe run into the wellbore to prevent the hole from caving in and to isolate different formations. Casing is cemented in place.

Cementing Unit —A truck-mounted or skid-mounted unit used to pump cement slurry into the wellbore. Includes high-pressure pump, mixing system, and instrumentation.

Coiled Tubing (CT) —Continuous steel pipe wound on a reel, used for well intervention operations. Can be run into live wells without killing them.

Crane / Hoist —Equipment for lifting heavy loads. Used in rigup/down, equipment handling, and various oilfield operations.

D

Derick / Mast —The tall steel structure on a drilling rig or workover rig that supports the hoisting equipment and pipe handling.

Drawworks —The hoisting mechanism on a drilling or workover rig. It raises and lowers the traveling block, hook, and pipe string.

Drilling Rig —The complete system of equipment used to drill a well. Includes derrick, drawworks, mud system, power, and controls.

F

Frac / Fracturing —Short for hydraulic fracturing. A stimulation technique where fluid is pumped at high pressure to create fractures in the rock formation, increasing hydrocarbon flow.

Frac Blender —The unit that mixes proppant (sand) with fracturing fluid at precise concentrations for delivery to the pumps.

Frac Pump Truck —A truck-mounted high-horsepower pumping unit used in hydraulic fracturing operations. Multiple units work together in a "spread."

H

Hook Load —The weight suspended from the hook of a drilling or workover rig. Determines the rig's lifting capacity requirement.

Hydraulic Fracturing —See "Frac."

HSE (Health, Safety, Environment) —The industry focus area covering worker safety, environmental protection, and health in oilfield operations.

M

Mud / Drilling Fluid —The fluid circulated through the drillpipe and annulus during drilling. It cools the bit, carries cuttings to the surface, and provides hydrostatic pressure to prevent well blowouts.

MPa (Megapascal) —A metric unit of pressure. 1 MPa =?145 psi. Pressure ratings are often specified in both MPa and psi in international trade.

P

Proppant —Sand or ceramic particles used in hydraulic fracturing. They hold the fractures open after pumping stops, maintaining permeability.

PSI (Pounds per Square Inch) —The standard US unit of pressure. 1 psi =?0.006895 MPa. Oilfield pressures are commonly specified in psi.

S

Snubbing Unit —Equipment for performing live-well (pressurized) interventions. Can run and pull pipe under pressure without killing the well.

Workover Rig —A rig used for well servicing operations: pulling and running tubing, changing pumps, well stimulation, and other maintenance operations.

Wellhead —The assembly of valves, spools, and fittings installed on top of the well. Controls pressure and provides connections for various operations.

Frequently Asked Questions

What's the difference between a drilling rig and a workover rig?

A drilling rig is used to drill new wells —it's designed for deep drilling operations with high torque and high hook load. A workover rig is used to service existing wells —pulling and running tubing, replacing downhole pumps, well stimulation, etc. Workover rigs are generally smaller and less powerful than drilling rigs, optimized for well maintenance rather than new well construction.

What does "HP" mean in oilfield equipment?

HP stands for horsepower —a unit of power. In oilfield equipment, it refers to the power output of engines and motors. For example, a 2,000 HP frac truck has a 2,000 horsepower engine. Higher HP generally means more pumping capacity or more lifting capability. When comparing equipment, HP is one key specification to look at.

What's the difference between psi and MPa?

Both are units of pressure. PSI (pounds per square inch) is the US customary unit. MPa (megapascal) is the metric (SI) unit. Conversion: 1 MPa =?145 psi, and 1 psi =?0.006895 MPa. When buying equipment internationally, you'll see both units. Make sure you know which unit the specification is using —5,000 psi is very different from 5,000 MPa!

What's a "frac spread"?

A frac spread is the complete fleet of equipment used for hydraulic fracturing operations. It includes multiple frac pump trucks, a blender, sand movers, a data van/control van, and high-pressure manifolding. A typical spread might have 4–12 pump trucks working together. The total horsepower of the spread determines the maximum pumping rate achievable.

What does "BOP" stand for?

BOP stands for Blowout Preventer. It's a large, heavy valve assembly installed at the wellhead to control well pressure and prevent blowouts (uncontrolled flow of oil or gas). BOPs are critical safety equipment for drilling, workover, and intervention operations. There are different types of BOPs: annular BOPs, ram BOPs, and more.

Have a Question About an Oilfield Term?

If there's an oilfield equipment term you don't understand, or you need clarification on a technical specification, our team is here to help. We speak the industry language —ask us anything.