Towable | Semi-Mobile | Cost-Effective

Trailer-Mounted Pumping Unit: Towable, Flexible, Cost-Effective

What if you need a pump unit that moves occasionally —not every day, but not permanent either? A trailer-mounted pump unit is the middle ground. It's mounted on a heavy-duty trailer with wheels, brakes, and lighting: you tow it with a standard truck to the well site, park it, deploy the outriggers, and start pumping. It costs less than a truck-mounted unit (no cab, no dedicated chassis), but more than a skid (you get wheels and mobility). For production companies that have their own trucks, for backup/emergency pumps, or for operations that move a few times a year, a trailer-mounted pump is the sweet spot between cost and flexibility.

Trailer-mounted pumping unit towable by truck

Trailer-Mounted vs Truck-Mounted: Which Is Right?

Factor Trailer-Mounted Truck-Mounted
Relative Cost Lower (~60-70% of truck) Higher (includes chassis + cab)
Mobility Towable by any suitable truck Self-propelled, dedicated vehicle
Setup Time Park, lower outriggers, connect Drive to location, park, connect
Utilization Best for occasional moves (a few times/year) Best for frequent moves (daily/weekly)
What You Need A suitable tow truck (you probably already have one) The truck is included —no separate vehicle needed

Trailer-Mounted Pump Unit Features

Heavy-Duty Trailer Chassis

Multi-axle trailer chassis designed for oilfield duty. High capacity, rugged suspension, heavy-duty tires. Rated for highway transport and off-road oilfield access. All units include brakes, lighting, and safety chains for road use.

Outriggers & Stabilizers

Hydraulic or mechanical outriggers deploy at the well site to level and stabilize the unit. This is critical for high-pressure pump operation —vibration and reaction forces need a stable base. Outriggers make setup quick and safe.

Tow-Ready Design

The trailer includes a hitch coupling, safety chains, breakaway system, and road lighting. You just connect to your tow truck's hitch and electrical system. No special preparation needed —it's towable out of the factory.

Compact Footprint

Trailer-mounted units are more compact than truck-mounted units (no cab taking up space). This matters on crowded well sites or offshore platforms where deck space is limited. The unit can park closer to the well.

Frequently Asked Questions

What kind of truck do I need to tow a trailer-mounted pump unit?

It depends on the unit weight. Smaller pump units (under 10 tonnes) can be towed by a heavy-duty pickup or medium truck. Larger units (20-30 tonnes) need a heavy-duty truck or prime mover with sufficient towing capacity. We provide the trailer's GVW (gross vehicle weight) and hitch weight in the specifications. Tell us what trucks you have available, and we'll confirm towing compatibility.

Can trailer-mounted pump units be driven on public roads?

Yes. Our trailer-mounted units are designed for highway transport with proper brakes, lighting, and safety equipment. However, oversize/overweight loads may require special permits depending on your country's regulations. For large units, we can discuss transport options (lowboy trailer, escort vehicles, etc.). Tell us your local road regulations, and we'll advise accordingly.

How long does setup take on site?

A typical trailer-mounted pump unit can be set up in 30-60 minutes: park at the location, deploy outriggers, level the unit, connect suction and discharge hoses, connect fuel/electrical, and start up. This is much faster than a skid unit (which needs crane and foundation work) and comparable to a truck-mounted unit for basic setup.

Need a Towable Pump Unit for Semi-Mobile Operations?

Tell us your pumping requirements and how often you need to move the unit. We'll design a trailer-mounted pump unit —cost-effective, towable, and ready to work when you are.