Operator Console
The main control panel with joystick or lever controls for injector head speed, reel rotation and BOP functions. All critical controls within arm's reach.
The control cabin is the brain of any coiled tubing operation. This is where the operator monitors injector head forces, reel speed, circulating pressure, depth and weight data —all in real time. A well-designed control cabin keeps the operator comfortable, focused and safe during long CT runs. Whether you're doing through-tubing intervention, live-well work or milling operations, the control cabin is where decisions happen and data gets translated into action.
A modern coiled tubing control cabin is more than just a seat in a box. Here's what's inside:
The main control panel with joystick or lever controls for injector head speed, reel rotation and BOP functions. All critical controls within arm's reach.
Real-time monitors showing depth, weight, pressure, flow rate and injector force. Digital depth counter with foot or meter precision. Trend plots for post-job review.
E-stops at the operator station and remote locations. Pressure relief and shear-seal controls for immediate response to well control events.
Heating, ventilation and air conditioning for operator comfort in extreme temperatures. Noise-dampened walls for reduced fatigue during long shifts.
| Parameter | Typical Range |
|---|---|
| Number of operators | 1 - 2 (primary + assistant) |
| Display screens | 2 - 4 (depth, pressure, injector, system status) |
| Depth measurement accuracy | ± 0.1 m (0.3 ft) |
| Pressure rating (control lines) | 70 - 105 MPa (10,000 - 15,000 psi) |
| Climate control | Heating + AC, -20°C to +50°C ambient |
| Mounting | Skid-mounted on CT unit, or standalone cabin |
Yes. Most CT units can be retrofitted with a modern control cabin and data acquisition system. The process involves installing new sensors (depth encoders, pressure transducers, load cells), running new wiring and mounting the cabin console. Retrofitting is often more cost-effective than buying a new unit, especially if the existing mechanical equipment is still in good shape.
At minimum: measured depth, weight (up/down), circulating pressure, injector head force, reel speed and flow rate. Advanced systems also monitor return line pressure, BOP position, hydraulic system pressure and engine parameters. The key is that the operator sees everything needed to make decisions without leaving the cabin.
Standard control cabins are rated for Class I Division 2 areas. For well sites with higher hazard ratings, you can specify explosion-proof enclosures, pressurized cabins or additional gas detection systems. Always check your site's hazard classification before specifying the cabin rating.
Tell us your CT model, preferred display configuration and mounting requirement. Our engineering team will design a control cabin that fits your operation and budget.