Coiled Tubing Power Pack: The Energy Source of the CT Unit
The coiled tubing power pack is the hydraulic power unit that supplies pressurized hydraulic fluid to the injector, reel, control cabin and other CT system components. It is the "engine room" of the CT unit —without it, nothing moves.
What the Power Pack Powers
The CT power pack supplies hydraulic energy to all moving components:
- Injector: Drives the clamping chains that push/pull the tubing
- Reel: Rotates the spool to feed or spool tubing
- Control cabin functions: BOP control functions if equipped
- Level winder: Guides tubing onto the reel evenly
- Stabilizers/leveling jacks: For unit setup and leveling
The power pack is typically mounted on the same truck or trailer as the rest of the CT unit. It is a self-contained diesel-powered hydraulic station with reservoir, pumps, valves and controls.
Typical Specifications
| Parameter | Typical Range |
|---|---|
| Engine type | Diesel engine (Cummins, Caterpillar, or equivalent) |
| Engine power | 150 - 400 HP |
| Hydraulic pump type | Variable displacement piston pumps |
| Working pressure | 20 - 35 MPa (3000 - 5000 psi) |
| Hydraulic reservoir capacity | 300 - 800 L |
| Cooling system | Hydraulic oil cooler with fan |
Frequently Asked Questions
Can the power pack run on electric motor instead of diesel?
Yes. We offer electric motor driven power packs for sites with available power supply. The electric motor (typically 150-300 kW) replaces the diesel engine and drives the same hydraulic pumps. Electric drive is quieter, produces no on-site emissions, and uses less energy. The trade-off is that it requires a power source. For remote well sites, diesel drive is still standard.
How do I size the power pack for my CT unit?
The power pack must supply enough hydraulic flow and pressure for all simultaneous functions. The main consumers are the injector (highest flow demand) and the reel. Size the pump capacity based on the maximum combined flow demand at the required pressure. Add 20-30% margin for simultaneous functions and future expansion. Our engineering team can calculate the right power pack size based on your injector model, reel size, and other CT system components.
What maintenance does the power pack need?
Regular maintenance includes: change engine oil and filters per manufacturer schedule, change hydraulic oil and filter every 2000-3000 hours, inspect hydraulic hoses and fittings for leaks or wear, clean the oil cooler, check belt tension, and test emergency shutdown functions. The power pack is the heart of the CT unit —regular preventive maintenance prevents costly downtime. Keep a maintenance log and follow the engine and pump manufacturer schedules.
Need a CT Power Pack?
Tell us your CT unit size and required hydraulic flow. Our engineering team will recommend the right power pack and provide a quote within 48 hours.