Components & Systems | Technical Reference

Coiled Tubing Equipment: Components & Systems Guide

Coiled tubing equipment refers to all the machinery and systems that make up a coiled tubing unit (CTU). This guide details the key components —reel, injector, BOP, control cabin, power pack and fluid pump —their functions, specifications and maintenance requirements.

Coiled tubing equipment components guide

Coiled Tubing Reel

The reel is the spool that stores the coiled tubing. It is one of the largest and heaviest components of a CTU:

Key Features

  • Drum diameter: Sized to accommodate the CT length and diameter without exceeding minimum bend radius
  • Flange diameter: Determines the total tubing capacity
  • Hydraulic drive: Hydraulic motor and gearbox rotate the reel to spool and unspool tubing
  • Level winder: Ensures the tubing is wound evenly on the reel
  • Rotary union: Allows fluid to be pumped through the reel while it is rotating
  • Weight monitoring: Load cell measures the weight of tubing on the reel

Specifications

  • Capacity: 3,000 - 6,000 m depending on tubing size
  • Max tubing diameter: 1.0" - 2.875"
  • Min. bend radius: 30 - 50 x tubing diameter
  • Drive: Hydraulic motor with planetary gearbox
  • Rotary union pressure rating: 35 - 70 MPa

Injector Head

The injector head grips the coiled tubing and pushes it into or pulls it out of the well. It is the heart of the CTU:

Key Features

  • Caterpillar tracks: Rubber-lined tracks grip the tubing on both sides
  • Hydraulic drive: Hydraulic motors drive the tracks to push/pull tubing
  • Gooseneck: Guides the tubing from the reel into the injector
  • Injector frame: Structural frame that supports the tracks and hydraulic system
  • Load measurement: Load cell measures injector pull/push force
  • Tubing size range: Adjustable for different tubing diameters

Specifications

  • Pull force: 30,000 - 100,000 lbf (130 - 440 kN)
  • Push force: 15,000 - 50,000 lbf (65 - 220 kN)
  • Speed: 0 - 60 m/min (variable)
  • Tubing range: 1.0" - 2.875"
  • Weight: 3,000 - 8,000 kg

Blowout Preventer (BOP) Stack

The BOP stack provides well control during coiled tubing operations. It seals the annulus around the coiled tubing:

Key Features

  • Annular BOP: Seals around the coiled tubing while it is moving
  • Pipe rams: Seal around the tubing at a fixed point
  • Blind rams: Seal the well when no tubing is in the BOP
  • Shear rams: Cut the tubing in an emergency
  • Stripper: Seals around the tubing as it is pulled out of the well
  • Hydraulic control: All rams are operated hydraulically from the control cabin

Specifications

  • Pressure rating: 35 - 70 MPa (5,000 - 10,000 psi)
  • Bore size: 3-1/16" - 7-1/16"
  • Tubing range: 1.0" - 2.875"
  • API standard: API 16A
  • Control: Hydraulic with accumulator system

Control Cabin

The control cabin is the operator's workstation. All CTU operations are monitored and controlled from here:

Key Features

  • Main control panel: Controls reel, injector, BOP and fluid pump
  • Data acquisition system: Monitors and logs all operation parameters
  • Emergency shutdown (ESD): Instantly stops all operations in an emergency
  • Communication system: Radio communication with the rig floor and pump operator
  • Climate control: Air conditioning and heating for operator comfort
  • Safety systems: Alarm system, fire suppression, emergency lighting

Monitored Parameters

  • Injector load: Pull/push force on the tubing
  • Tubing depth: Measured depth of the tubing in the well
  • Fluid pressure: Pump pressure at the reel and injector
  • Flow rate: Fluid flow rate down the coiled tubing
  • Reel speed: Tubing spool/unspool speed
  • Wellhead pressure: Annulus pressure at the wellhead

Power Pack (Hydraulic Power Unit)

The power pack provides hydraulic power to drive all CTU components:

Key Features

  • Diesel engine: Drives the hydraulic pumps
  • Hydraulic pumps: Multiple pumps provide flow for different functions
  • Hydraulic reservoir: Stores hydraulic fluid
  • Filtration system:
  • Cooling system: Keeps hydraulic fluid at operating temperature
  • Valve manifold: Distributes hydraulic flow to different functions

Specifications

  • Engine power: 200 - 500 HP (150 - 370 kW)
  • Hydraulic flow: 200 - 500 L/min
  • Pressure: 20 - 35 MPa (3,000 - 5,000 psi)
  • Reservoir capacity: 500 - 1,500 L
  • Cooling: Oil cooler with fan

Fluid Pump Unit

The fluid pump unit pumps treatment fluid down the coiled tubing:

Key Features

  • High-pressure pump: Triplex or quintuplex plunger pump
  • Diesel engine: Drives the pump
  • Suction manifold: Draws fluid from the storage tank
  • Discharge manifold: Delivers high-pressure fluid to the reel
  • Flow meter: Measures fluid flow rate
  • Pressure gauge: Monitors discharge pressure

Specifications

  • Flow rate: 100 - 500 L/min
  • Pressure rating: 35 - 70 MPa (5,000 - 10,000 psi)
  • Engine power: 150 - 400 HP (110 - 300 kW)
  • Pump type: Triplex plunger pump
  • Fluid type: Water-based, oil-based, acid, chemical additives

Key Maintenance Considerations

Proper maintenance of coiled tubing equipment is essential for safe and reliable operation:

Regular Inspection

Inspect all critical components before each run: injector tracks, BOP rams, reel bearings, hydraulic hoses, control systems. Use API recommended inspection intervals as a guideline.

Lubrication

Proper lubrication extends component life dramatically. Follow manufacturer's lubrication schedules for all bearings, gears and sliding surfaces. Use the correct lubricant grade for the operating temperature range.

Wear Parts Replacement

Track wear on key components: injector track pads, BOP elastomers, reel bearings, hydraulic seals. Replace before failure to avoid unplanned downtime. Keep critical spares on location.

Frequently Asked Questions About CT Equipment

What is the most important piece of coiled tubing equipment?

All components are critical, but the injector head is the heart of the CTU. It is responsible for gripping and moving the coiled tubing. Without a reliable injector, the CTU cannot function. That is why injector design and maintenance are so important.

Can you supply individual CT equipment components?

Yes. We supply individual components: injectors, reels, BOP stacks, control cabins, power packs, fluid pumps. You can purchase individual parts to replace worn or damaged equipment on your existing CTU. We also offer refurbishment services for major components.

What API standards apply to coiled tubing equipment?

The main API standard for coiled tubing is API Spec 5ST (Specification for Coiled Tubing). API 16A applies to BOP equipment. API 7K applies to pumping equipment. The CT equipment itself does not have a single API standard, but components like BOPs and pumps have their respective API standards.

How do I know which CT equipment specifications I need?

The required specifications depend on your typical well conditions: well depth, tubing size, fluid types, wellhead pressure. We recommend consulting with a CT engineer to determine the right equipment specifications. Our engineering team can help you evaluate your needs and recommend the right equipment.

What is the typical lifespan of coiled tubing equipment?

With proper maintenance, CT equipment typically operates for 15-20 years. Major components (reel, injector frame, control cabin) have long service lives. Wear parts (injector tracks, BOP elastomers, hydraulic seals) are replaced periodically as part of routine maintenance.

Need Coiled Tubing Equipment or Spare Parts?

Tell us which components you need or provide your CTU make and model. Our parts team will identify the correct replacement parts and provide a competitive quotation within 48 hours.