CT Reel | Tubing Storage Spool | Hydraulic Driven

Coiled Tubing Reel: Storage and Payload for the CT Unit

The coiled tubing reel is the large spool that stores hundreds or thousands of meters of coiled tubing. It hydraulically feeds tubing to the injector as needed. The reel is the payload carrier —the tubing length you can run is limited by the reel's capacity.

Coiled tubing reel spool

How the CT Reel Works

The reel works in coordination with the injector:

  • Spool: The large drum where coiled tubing is wound in layers
  • Hydraulic drive: Hydraulic motor rotates the reel in either direction
  • Level winder: Guides the tubing evenly onto the reel during spooling
  • Feeding out: As the injector pulls tubing, the reel feeds out at matching speed
  • Spooling in: As the injector pushes tubing back, the reel winds it back onto the spool
  • Tension control: The reel maintains slight back-tension to keep the tubing straight

The reel sits next to the injector on the CT unit bed. Tubing comes off the reel, goes through a guide arch, and enters the injector. Proper coordination between reel speed and injector speed prevents slack or over-tension on the tubing.

Typical Specifications

Parameter Typical Range
Tubing size range 1" - 3.5" (25 - 89 mm)
Tubing capacity 3,000 - 8,000 m (10,000 - 26,000 ft)
Reel drum diameter 1.5 - 2.5 m
Flange diameter 3.0 - 4.5 m
Hydraulic drive torque 5,000 - 20,000 N|m
Weight (empty) 3 - 8 tons

Frequently Asked Questions

What determines how much tubing a reel can hold?

The reel's capacity depends on three factors: drum diameter (smaller drum = less capacity), flange diameter (larger flanges = more layers = more capacity), and tubing diameter (smaller tubing = more length). The capacity is calculated by the volume between the drum and flanges, divided by the cross-sectional area of the tubing. We can calculate the exact capacity for any tubing size and reel dimensions.

Can I change tubing size on the same reel?

Yes, as long as the new tubing size fits within the reel's physical limits. You wind off the old tubing, then spool on the new tubing. The reel's hydraulic drive and level winder work with any tubing size within range. You may need to adjust the level winder settings for different tubing diameters. Changing tubing size between jobs is common practice in CT operations.

How does the reel coordinate with the injector?

The reel and injector must be speed-matched. The injector pulls tubing at a certain speed; the reel must feed out at the same speed. Modern CT units have a control system that automatically coordinates reel speed with injector speed. The driller sets the desired tubing speed; the control system adjusts both reel and injector to match. This prevents tubing slack (which causes kinks) or over-tension (which stretches the tubing).

Need a Coiled Tubing Reel?

Tell us your tubing size and required length. Our engineering team will recommend the right reel capacity and provide a quote within 48 hours.