Fixed Location | Cost Effective | Offshore Friendly

Skid Mounted Coiled Tubing Unit: Built for Staying Put

Not every coiled tubing unit needs to drive itself to location. If your operation is based at a central processing facility, an offshore platform, or a remote field where you fly equipment in by helicopter or barge, a skid-mounted CT unit is the smart choice. No truck chassis means lower cost, easier shipping, and a smaller footprint on a crowded platform deck. You still get the full injector, reel and power pack capability —just without the big diesel truck underneath.

Skid mounted coiled tubing unit on offshore platform

Skid Mounted vs Truck Mounted CT Unit

Both work, but they're designed for different operating scenarios:

Skid Mounted Advantages

Lower purchase cost (no truck chassis). Easier to ship overseas by container or flatbed. Smaller footprint —critical on offshore platforms. Can be lifted by crane or helicopter. Ideal for permanent or semi-permanent locations.

Truck Mounted Advantages

Self-propelled —drive from well to well. No need for separate transport. Faster rig-up on location. Better for multi-well campaigns in the same field. The classic choice for land-based service companies.

Choose skid mounted if: your CT unit stays at one location, you work offshore, or you ship equipment internationally. Choose truck mounted if: you move between wells frequently and need to be on location and working within hours.

Where Skid CT Units Are Most Common

Offshore Platforms

Deck space is at a premium offshore. Skid units are compact, container-sized, and can be lifted by platform crane. Perfect for platform-based intervention.

Central Processing Facilities

When you have a battery of wells tied back to one facility, a skid CT unit at the central location is more efficient than moving a truck around.

Remote & Arctic Fields

Roads may not exist. Skid units can be delivered by ice road, barge, or helicopter and left on location for the winter season.

Typical Specifications

Parameter Typical Range
Injector force 40,000 - 120,000 lbs (18 - 54 tonnes)
Tubing OD 1-1/4" - 2-7/8"
Reel capacity 3,000 - 8,000 m (9,800 - 26,000 ft)
Power pack 300 - 600 HP diesel or electric
Skid dimensions Container-sized, ISO 10ft / 20ft / 40ft options
Lifting points Certified lifting lugs for crane or helicopter

Frequently Asked Questions

How do you move a skid mounted CT unit between wells?

You'll need a separate transport solution —typically a flatbed truck, a lowboy trailer, or for offshore work, a supply vessel or platform crane. The skid design includes certified lifting lugs so it can be safely lifted and placed. For multi-well campaigns in the same field, some operators use a skid mover system or roll the skid on timber skates. The trade-off is lower capital cost versus higher mobilization cost between locations.

Can a skid CT unit be converted to truck mounted later?

It's possible but not practical. The skid and truck chassis are fundamentally different mounting systems. The injector, reel and power pack are the same, but the supporting structure, hydraulics routing and control cabin position are all designed around the skid or truck. If you think you might need truck mobility in the future, it's usually better to start with a truck mounted unit from the beginning.

What about electric drive skid units for offshore?

Many offshore skid CT units are electric drive —powered by the platform's electrical system rather than a diesel engine. This reduces emissions, noise and fuel handling on the platform. Electric drive skids are also common at onshore facilities with grid power. The trade-off is you're dependent on the facility power supply —a backup diesel generator is usually included for emergencies.

Need a Skid Mounted CT Unit?

Tell us your working location (offshore platform? onshore facility?), required tubing size and injector force. We'll design a skid unit that fits your space and budget.