Large Diameter | Deep Well | HPHT Applications

Heavy Duty Coiled Tubing Unit for Deep & High-Pressure Operations

A heavy duty coiled tubing unit is designed for large-diameter tubing (2.0" and above) and deep-well operations where standard CTUs fall short. These units have higher pull force, larger reel capacity, and higher pressure ratings to handle the demanding conditions of ultra-deep and high-pressure wells.

Heavy duty coiled tubing unit for deep well operations

What Makes a CTU "Heavy Duty"?

Heavy duty coiled tubing units are distinguished from standard CTUs by several key specifications:

Higher Pull Force

  • Standard CTU: 40,000 - 60,000 lbf pull force
  • Heavy duty CTU: 80,000 - 120,000 lbf pull force
  • Needed for larger diameter tubing and deeper wells
  • More injector tracks and larger hydraulic cylinders

Larger Tubing Diameter

  • Standard CTU: 1.0" - 1.75" tubing
  • Heavy duty CTU: 2.0" - 2.875" tubing
  • Larger diameter allows higher flow rates
  • Enables heavier downhole tools and operations

Higher Pressure Rating

  • Standard CTU: 35 - 50 MPa (5,000 - 7,500 psi)
  • Heavy duty CTU: 70 - 105 MPa (10,000 - 15,000 psi)
  • Required for deep and HPHT wells
  • Heavy-wall reel, high-pressure BOP, high-pressure fluid pump

Larger Reel Capacity

  • Standard CTU: 3,000 - 4,500 m tubing
  • Heavy duty CTU: 4,500 - 6,000 m tubing
  • Larger reel drum and flanges
  • More powerful reel drive system

What Are Heavy Duty CTUs Used For?

Heavy duty coiled tubing units are used for operations that exceed the capabilities of standard CTUs:

Ultra-Deep Well Intervention

For wells deeper than 5,000 m, standard coiled tubing cannot reach the bottom due to its own weight. Heavy duty CTUs with larger diameter tubing (which has a higher strength-to-weight ratio) can reach deeper. The higher pull force is needed to pull the heavy tubing string out of the well.

High-Pressure / HPHT Wells

High-pressure high-temperature (HPHT) wells require CTUs with pressure ratings of 70 MPa (10,000 psi) or higher. This includes high-pressure BOP stacks, heavy-wall reels, high-pressure fluid pumps, and high-pressure control systems. Standard CTUs are not rated for these conditions.

High-Rate Cleanout Operations

Large-volume sand cleanout in mature wells requires high flow rates (200-500 L/min). This is only possible with large-diameter coiled tubing (2.0"+). The larger internal diameter of the tubing allows higher flow rates with lower pressure drop. Heavy duty CTUs with large fluid pumps are required.

Coiled Tubing Drilling (CTD)

Coiled tubing drilling uses CTUs to drill new wells or sidetrack existing wells. CTD requires large-diameter tubing, high pull force, and high flow rates for the downhole drilling motor. Heavy duty CTUs are the standard choice for CTD operations.

Heavy Fishing Operations

Retrieving heavy downhole tools or stuck pipe requires high pull force. Heavy duty CTUs with 100,000+ lbf pull force can handle heavier fishing jobs. Larger diameter tubing provides more strength for pulling operations.

Large-Scale Stimulation

Matrix acidizing or hydraulic fracturing through coiled tubing requires high flow rates and high pressures. Heavy duty CTUs with large fluid pumps and high-pressure tubing can handle these operations. Larger diameter tubing allows more fluid to be placed per minute.

Heavy Duty CTU Model Range

Our heavy duty coiled tubing unit lineup covers the range from medium-heavy to super-heavy intervention:

Model Max Tubing OD Pull Force Pressure Rating Reel Capacity
SCT200-HD 2.0" (50.8 mm) 80,000 lbf (356 kN) 70 MPa (10,000 psi) 4,500 m
SCT2375-HD 2.375" (60.3 mm) 100,000 lbf (445 kN) 70 MPa (10,000 psi) 4,000 m
SCT2875-HD 2.875" (73.0 mm) 120,000 lbf (534 kN) 105 MPa (15,000 psi) 3,500 m

Design Features of Heavy Duty CTUs

Reinforced Injector

Heavy duty CTUs use reinforced injector heads with additional track pads and heavier hydraulic cylinders. The injector frame is also reinforced to handle the higher pull forces. The gooseneck is designed for larger tubing diameters.

Heavy-Wall Reel

The reel drum and flanges are made from heavier steel plate to handle the larger tubing and higher pressures. The rotary union is rated for higher pressure. The reel drive system uses larger hydraulic motors and heavier gearboxes.

High-Pressure BOP Stack

The BOP stack is rated for 70 MPa (10,000 psi) or higher. It includes annular BOP, pipe rams, blind rams, shear rams, and a stripper. All rams are hydraulically operated from the control cabin.

High-Pressure Fluid Pump

A high-pressure triplex plunger pump provides fluid at 70 MPa (10,000 psi) or higher. Flow rates range from 200-500 L/min. The pump is driven by a diesel engine or electric motor.

Enhanced Control System

The control cabin has enhanced monitoring systems: real-time tubing stress analysis, fatigue life monitoring, depth correlation accuracy. All critical parameters are logged for post-job analysis and reporting.

Skid-Mounted Configuration

Heavy duty CTUs are typically skid-mounted rather than truck-mounted due to their size and weight. The skid design allows modular transport and assembly at the well site. This is especially important for offshore or remote locations.

Tubing Considerations for Heavy Duty Operations

Material Grade

Heavy duty CTUs use coiled tubing made from higher-strength steel grades (QT-800, QT-900, QT-1000 or equivalent). These materials have higher yield strength and tensile strength, allowing them to handle higher stresses. However, they are also more susceptible to fatigue cracking, so regular inspection is essential.

Wall Thickness

For high-pressure applications, heavier wall thickness tubing is used. For example, 2.0" tubing may use 0.156" (3.96 mm) wall instead of 0.125" (3.18 mm). The heavier wall provides more strength and pressure containment capacity, but also increases the weight per meter, reducing the maximum depth.

Frequently Asked Questions About Heavy Duty CTUs

What is the maximum depth a heavy duty CTU can reach?

The maximum depth depends on tubing size and wall thickness. A 2.0" CTU with standard wall can typically reach 5,000-5,500 m. A 2.375" CTU can reach 4,500-5,000 m. A 2.875" CTU can reach 3,500-4,000 m. The limiting factor is the tensile strength of the tubing —it must support its own weight plus any downhole loads and overpull.

Can heavy duty CTUs be truck-mounted?

2.0" heavy duty CTUs can be truck-mounted on a heavy truck chassis. Larger sizes (2.375" and 2.875") are typically skid-mounted due to their size and weight. The larger reel, heavier injector, and higher pressure equipment require a substantial skid base. Truck mounting is only feasible for medium-sized heavy duty CTUs.

What is the cost difference between standard and heavy duty CTUs?

A standard 1.75" CTU may cost USD 500,000-800,000. A heavy duty 2.0" CTU typically costs USD 900,000-1,500,000. A 2.875" heavy duty CTU can cost USD 2-3 million. The cost difference comes from: larger reel, reinforced injector, high-pressure BOP, high-pressure fluid pump, heavier frame and structure, and enhanced control systems.

How does coiled tubing drilling (CTD) work?

Coiled tubing drilling uses a downhole mud motor driven by fluid pumped down the coiled tubing. The CTU pumps high-pressure fluid through the tubing, which drives the downhole motor and drill bit. The CTU controls the weight on bit (WOB) by pushing the tubing down. CTD is typically used for sidetracking existing wells or drilling lateral sections. It is faster and cheaper than conventional drilling for these applications.

What safety considerations are important for heavy duty CT operations?

Heavy duty CT operations involve higher pressures and larger equipment. Key safety considerations include: proper well control procedures (BOP testing, kill line preparation), pressure monitoring and emergency shutdown systems, proper rig-up and rig-down procedures, personnel training and certification, regular equipment inspection and maintenance, and adherence to API recommended practices (API RP 18C for coiled tubing operations).

Need a Heavy Duty Coiled Tubing Unit?

Tell us your target depth, wellhead pressure and typical applications. Our engineering team will recommend the optimal heavy duty CTU configuration and provide a detailed quotation within 48 hours.