Glossary | Well Operations Terms

Oilfield Operations Glossary

Oilfield operations have their own specialized vocabulary —terms you hear on location, in reports, and in technical documentation. This glossary covers the most common oilfield operation terms: drilling, completion, workover, production, and well intervention. Whether you're new to the industry or just need a quick reference, this glossary will help you understand the terminology used in the field.

Common Oilfield Operation Terms

Definitions of key well operation terms:

A

Annulus —The space between two concentric pipes in a well (e.g., between the casing and the tubing). Fluids can circulate through the annulus.

Artificial Lift —Any method used to lift oil to the surface when reservoir pressure is insufficient. Includes rod pumps, ESPs (electric submersible pumps), gas lift, and more.

B

Bottomhole Assembly (BHA) —The part of the drillstring or tubing string at the bottom. For drilling: includes drill bit, stabilizers, and downhole tools. For workover: includes downhole tools and equipment.

Blind Box / Blind Flange —A solid flange used to seal off a pipe or wellhead opening. Used when a port is not in use.

C

Cementing —The process of pumping cement slurry into the annulus between casing and formation. Cementing seals the casing in place and provides zonal isolation.

Completion —The process of making a well ready for production. Includes perforating, installing production tubing, setting packers, and installing artificial lift if needed.

Crude Oil —Unrefined petroleum as it comes out of the ground. Crude oil varies widely in viscosity, sulfur content, and quality depending on the reservoir.

D

Drilling —The process of creating a wellbore by using a drill bit to break rock. Drilling is the first step in oil and gas exploration and development.

Drill String —The column of drill pipe and bottomhole assembly that connects the surface rig to the drill bit. Rotates the bit and circulates drilling fluid.

E

Enhanced Oil Recovery (EOR) —Techniques used to increase oil recovery beyond primary (natural drive) and secondary (water/gas injection) recovery. EOR methods include steam injection, gas injection, chemical injection, and more.

F

Flowline —The pipe that carries produced fluids from the wellhead to production facilities. Flowlines can be above ground or buried.

Formation —A body of rock with similar characteristics. Oil and gas are found in porous, permeable rock formations. Different formations have different properties.

H

Hydrostatic Pressure —The pressure exerted by a column of fluid. In a well, hydrostatic pressure from the drilling fluid or completion fluid helps control formation pressure.

K

Kill the Well —To circulate heavier fluid into the well to overcome formation pressure and stop flow. A well is "killed" before many workover operations to prevent uncontrolled flow.

L

Lift Height / Pumping Depth —The depth from which fluid is lifted to the surface. Determines the required capacity of artificial lift equipment.

P

Perforating —The process of shooting holes through the casing and cement into the producing formation. Perforations allow oil and gas to flow from the formation into the wellbore.

Production —The phase when oil and gas are produced from the well and brought to the surface. Production is the final goal of drilling and completion operations.

Proppant —Sand or ceramic particles used in hydraulic fracturing. They hold fractures open, maintaining permeability and hydrocarbon flow.

R

Run in Hole (RIH) —The process of lowering pipe, tools, or equipment into the wellbore. The opposite is "pull out of hole" (POOH).

Reservoir —A porous, permeable rock formation that contains economically recoverable hydrocarbons. The reservoir is the target of drilling operations.

S

Stimulation —Treatments performed to improve well productivity. Includes hydraulic fracturing (fracking), acidizing, and other techniques.

Surface Equipment —All equipment located on the surface at the wellsite. Includes wellhead, flowlines, separators, tanks, pumps, and more.

W

Well Intervention —Any operation performed on a well after completion to improve production, repair problems, or perform maintenance. Includes workover, coiled tubing, snubbing, and more.

Workover —Maintenance or repair work performed on a producing well. Typically involves pulling and running tubing, changing pumps, cleaning out the wellbore, and similar operations.

Frequently Asked Questions

What's the difference between drilling and completion?

Drilling is the process of creating the wellbore —using a drill bit to cut through rock to reach the target formation. Completion is what happens after drilling: making the well ready for production. Completion includes running casing, cementing, perforating, installing production tubing, setting packers, and installing artificial lift. Drilling creates the hole; completion makes it produce.

What does "killing a well" mean?

Killing a well means circulating heavier (denser) fluid into the wellbore to create enough hydrostatic pressure to overcome formation pressure and stop the well from flowing. This is done before many workover operations to prevent uncontrolled flow (a blowout). A killed well is safe to work on. Snubbing units allow work on live wells without killing them.

What's the difference between primary, secondary, and tertiary recovery?

Primary recovery uses natural reservoir pressure to bring oil to the surface. Secondary recovery (water or gas injection) maintains reservoir pressure to push more oil out. Tertiary recovery, also called Enhanced Oil Recovery (EOR), uses advanced techniques like steam, gas, or chemical injection to mobilize additional oil. Each stage recovers more oil from the reservoir but at higher cost.

What's the annulus and why does it matter?

The annulus is the space between two concentric pipes in a well —for example, between the production tubing and the casing. The annulus serves several purposes: it allows fluid circulation down the tubing and back up the annulus, it provides a backup path for production, and it's monitored for pressure changes. Annular pressure monitoring is important for well integrity.

What's the difference between workover and well intervention?

Well intervention is the broader term —any operation performed on a well after it's completed. Workover is a specific type of intervention that uses a conventional workover rig with jointed tubing. Other types of well intervention include coiled tubing operations and snubbing operations. Workover = a subset of well intervention.

Have a Question About an Oilfield Operation?

If there's an oilfield operation term you don't understand, or you need clarification on how a particular process works, our team is here to help. We speak the industry language —ask us anything.