Chinese Chassis
- Dongfeng: Reliable, cost-effective, widely used in China, Central Asia, Africa
- Sinotruk (Howo): Heavy-duty, strong, good after-sales network in emerging markets
- Shacman: Robust, value-for-money, popular in Middle East and Africa
A truck mounted drilling rig integrates the complete drilling system onto a heavy-duty truck chassis. It is self-propelled —it drives between well sites on its own, without needing separate transport vehicles. This makes it the most mobile type of drilling rig available.
A truck mounted drilling rig is a complete drilling system mounted on a heavy-duty truck chassis. The entire rig —mast, drawworks, power system, mud pumps and control room —is integrated onto the truck. When the job is done, the rig simply drives to the next location.
We can mount our drilling rigs on chassis from major manufacturers worldwide. The choice depends on your local road regulations, terrain and spare parts availability:
| Factor | Truck-Mounted | Trailer-Mounted |
|---|---|---|
| Self-propelled | Yes (has its own engine and cab) | No (requires prime mover tractor) |
| Transport speed | Faster (can drive directly) | Slower (needs to be towed) |
| Rig-up time | Fast (hydraulic mast raise) | Fast (hydraulic mast raise) |
| Weight limit | Lower (limited by truck axle weight) | Higher (multiple trailer axles) |
| Max well depth | =?4,500 m typically | Up to 6,000+ m possible |
| Initial cost | Higher (includes truck chassis and cab) | Lower (no chassis cost, needs separate tractor) |
| Operating cost | Higher (heavier vehicle, more fuel) | Lower (tractor can be shared between rigs) |
| Best for | Frequent moves, road-accessible locations | Larger rigs, fewer moves, weight-limited roads |
Our truck mounted rig lineup covers the range from shallow workover to medium-depth development drilling:
| Model | Max Well Depth | Hook Load | Chassis Configuration | Axles |
|---|---|---|---|---|
| SJT1000 | 1,000 m | 150 ton | Dongfeng / Sinotruk | 4 axles |
| SJT2000 | 2,000 m | 250 ton | Sinotruk / Shacman | 6 axles |
| SJT3000 | 3,000 m | 350 ton | Volvo / Mercedes-Benz | 8 axles |
| SJT4500 | 4,500 m | 500 ton | Volvo / Mercedes-Benz | 10 axles |
Browse our standard truck mounted drilling rigs. All models are available on your choice of chassis brand and with mechanical or VFD electric drive.
We work with all major truck manufacturers worldwide. We can mount your drilling rig on the chassis of your choice —Chinese, European or American. We ensure the chassis is rated for the rig's weight and operating conditions.
The mast can be raised and lowered hydraulically from the truck cab. No separate crane needed for rig-up or rig-down. This saves significant time and cost on every move.
Our truck mounted rigs can be configured with VFD electric drive. This provides better control, higher efficiency and lower fuel consumption compared to mechanical drive. Electric drive also simplifies operation.
All our truck mounted rigs are designed to meet international road transport regulations. We can customize the rig to meet specific axle weight and dimension limits for your operating region.
For medium-sized rigs, the mud pumps and mud tanks can be integrated onto the same truck or on a second trailer. This reduces the number of loads needed and speeds up rig-up.
Our engineers provide commissioning, operator training and troubleshooting support worldwide. We work with local service partners to ensure rapid response when you need help in the field.
Due to road weight limits, truck mounted rigs are typically limited to 4,500 m maximum well depth. Beyond that, the rig becomes too heavy for road transport. For deeper wells, trailer-mounted or skid-mounted rigs are used. The exact limit depends on local road regulations.
Yes. If you already have a suitable heavy-duty truck chassis, we can mount the drilling rig on it. We will evaluate the chassis's load rating, axle configuration and compatibility. We provide engineering drawings and installation guidance.
On public highways, a loaded truck mounted rig typically travels at 60-80 km/h. On oilfield roads, speeds are much slower —20-40 km/h depending on road conditions. The rig is designed for heavy-load transport, not highway speed.
Truck mounted drilling rigs are designed to drill new wells from the surface. Workover rigs are typically smaller and used for well intervention on existing wells. Truck mounted drilling rigs have higher hoisting capacity and deeper drilling capability. However, many truck mounted rigs can also perform workover operations.
Standard configuration truck mounted rigs take approximately 12-18 months from order confirmation. Custom configurations (special chassis, climate package, automation system) may require 18-24 months. Refurbished or near-stock rigs can be delivered in 3-6 months.
Tell us your target well depth, preferred chassis brand and operating region. Our engineering team will recommend the optimal truck mounted rig configuration and provide a detailed quotation within 48 hours.