Mobile Intervention | Fast Mobilization

Truck Mounted Coiled Tubing Unit for Fast Mobilization

A truck mounted coiled tubing unit is a well intervention system built on a heavy truck chassis. It is self-propelled and can drive directly to the well site. Truck mounted CTUs are the most common configuration for onshore oilfield service companies that need to move quickly between multiple well locations.

Truck mounted coiled tubing unit on heavy truck chassis

What Is a Truck Mounted CTU?

A truck mounted coiled tubing unit integrates all CTU components onto a heavy-duty truck chassis. The reel, injector, BOP, power pack and control cabin are all mounted on the truck bed. The entire unit can drive to the well site, rig up in hours, perform the operation, and drive to the next location.

Key Components on the Truck

  • Reel: Mounted at the rear of the truck bed, stores the coiled tubing
  • Injector: Mounted on a hydraulic platform that raises/lowers for transport/operation
  • BOP stack: Carried on the truck bed, installed on the wellhead during operation
  • Power pack: Diesel engine and hydraulic pumps mounted on the truck
  • Control cabin: Enclosed operator station mounted on the truck bed
  • Outriggers: Hydraulic stabilizers deployed during operation

Truck Chassis Options

  • 8x4 or 10x8 drive: For on-road and off-road capability
  • Heavy-duty diesel engine: 400-600 HP for highway and job site driving
  • Air suspension: For smooth transport and operator comfort
  • Multiple axles: To handle the weight of the CTU equipment (30-50 tons total)
  • Brand options: We can mount on your preferred truck brand (Sinotruk, FAW, Dongfeng, Mercedes, Volvo, etc.)

Advantages of Truck Mounted CTUs

Fast Mobilization

Truck mounted CTUs can be mobilized within hours. They drive directly to the well site on public roads. No need for crane, disassembly, or special transport. This is critical for service companies that need to respond quickly to emergency well situations or work under tight schedules.

Multi-Well Pad Operations

For shale gas and tight oil operations with multiple wells on a single pad, truck mounted CTUs can move between wells quickly. Rig-up and rig-down takes only 2-4 hours per well. This dramatically improves operational efficiency compared to skid-mounted CTUs that require crane moves between wells.

Lower Initial Cost

Truck mounted CTUs are typically 10-20% cheaper than skid-mounted units of the same capacity. The truck chassis serves as both the transport and operating base, eliminating the need for separate transport vehicles and cranes.

Self-Contained Operation

The truck mounted CTU is a complete, self-contained unit. It brings everything needed for the job: power, control, pumping, and well control. No additional support vehicles are required for routine operations. This simplifies logistics and reduces the number of personnel needed.

Better Road Access

For well locations with good road access, truck mounted CTUs are the most practical choice. They can drive to remote locations on standard oilfield roads. Skid-mounted CTUs require crane transport, which is more expensive and less flexible.

Familiar Operating Interface

Truck mounted CTUs use the same control systems and operating procedures as skid-mounted units. Operators trained on one type can quickly transition to the other. This is important for service companies that operate a mixed fleet of CTUs.

Truck Mounted vs Skid Mounted CTUs

Which configuration is right for your operation? Here is a comparison:

Factor Truck Mounted Skid Mounted
Mobility High (self-propelled, drives to location) Low (requires crane and transport)
Rig-up time 2-4 hours 1-2 days (requires crane assembly)
Max tubing size Up to 2.0" (limited by truck weight) Up to 2.875" (no weight limit)
Footprint Compact (fits on truck) Larger (spread out on skids)
Initial cost Lower (no separate transport) Higher (plus crane and transport)
Operating cost per move Lower (just drive to next well) Higher (crane + disassembly + transport)
Best for Onshore, multi-well pads, service companies Offshore, permanent sites, ultra-deep wells
Road restrictions Subject to road weight/height limits No road restrictions (transported by truck)

Truck Mounted CTU Model Range

Our truck mounted CTU lineup covers the range from medium to heavy-duty intervention:

Model Tubing OD Pull Force Reel Capacity Truck Chassis
SCT150-TM 1.5" (38.1 mm) 50,000 lbf (222 kN) 4,500 m 8x4 heavy truck
SCT175-TM 1.75" (44.5 mm) 60,000 lbf (267 kN) 4,000 m 8x4 heavy truck
SCT200-TM 2.0" (50.8 mm) 80,000 lbf (356 kN) 3,500 m 10x8 heavy truck

Design Features of Our Truck Mounted CTUs

Integrated Design

All CTU components are integrated into a single truck package. The reel, injector, power pack, control cabin, and outriggers are all mounted on the truck bed. This ensures proper weight distribution and simplifies operation. No loose components to lose or misplace.

Hydraulic Injector Platform

The injector head is mounted on a hydraulic platform that lowers for transport and raises for operation. This allows the unit to meet road height restrictions while maintaining full operating height at the well site. The platform is hydraulically leveled to ensure proper alignment with the wellhead.

High-Pressure Fluid Pump

A high-pressure triplex plunger pump is mounted on the truck bed. It provides treatment fluid at 35-70 MPa (5,000-10,000 psi) depending on the model. Flow rates range from 100-300 L/min. The pump is driven by the truck's power take-off (PTO) or a separate diesel engine.

Enclosed Control Cabin

The operator works from an enclosed control cabin mounted on the truck bed. The cabin has climate control, comfortable seating, and all monitoring and control systems. Operators can work in comfort regardless of weather conditions. The cabin has a clear view of the wellhead and reel.

Hydraulic Outriggers

Four hydraulic outriggers are deployed during operation to stabilize the truck. They extend from the sides and front/rear of the truck, providing a stable platform for CT operations. The outriggers are hydraulically controlled from the operator's cabin. They retract completely for transport.

Customizable Chassis

We can mount the CTU on your preferred truck chassis. Popular options include Sinotruk Howo, FAW J6, Dongfeng, Shacman, as well as international brands like Mercedes-Benz, Volvo, and Scania. The choice of chassis depends on your local road conditions, service network, and preference.

Frequently Asked Questions About Truck Mounted CTUs

What road restrictions apply to truck mounted CTUs?

Truck mounted CTUs typically weigh 30-50 tons and are 4.5-5.5 m tall. This means they are subject to road weight limits, height limits, and width limits in most countries. In China, a 60-ton truck requires a Class A license and may need special permits for certain roads. In other countries, regulations vary. We can advise on road compliance for your specific region.

Can you mount the CTU on my existing truck chassis?

Yes. If you already have a suitable heavy truck chassis, we can design and mount the CTU equipment onto it. We need to know the chassis specifications: model, year, axle configuration, GVWR, PTO options, and current condition. Our engineering team will evaluate whether your chassis can safely support the CTU equipment.

What is the cost of a truck mounted CTU?

The cost depends on tubing size and configuration. A 1.5" truck mounted CTU may start from USD 400,000-600,000. A 1.75" CTU typically costs USD 600,000-900,000. A 2.0" heavy-duty CTU can cost USD 900,000-1,500,000. This includes the truck chassis, CTU equipment, control system, and BOP. The rental cost for a truck mounted CTU is typically USD 12,000-25,000 per day, depending on size and location.

How long does it take to rig up a truck mounted CTU?

A truck mounted CTU can be rigged up and ready to work in 2-4 hours. This includes: positioning the truck next to the well, deploying outriggers, raising the injector platform, installing the BOP stack on the wellhead, connecting hydraulic and electrical lines, and performing pre-job tests. Compare this to a skid-mounted CTU that takes 1-2 days to rig up with a crane.

What maintenance is required for a truck mounted CTU?

Regular maintenance includes: truck chassis maintenance (oil changes, tire checks, brake service), hydraulic system maintenance (filter changes, fluid checks), injector track inspection and replacement, BOP elastomer inspection, reel bearing lubrication, and control system calibration. We recommend a complete service every 500 operating hours or every 3 months, whichever comes first. We provide detailed maintenance manuals and training for your crew.

Need a Truck Mounted Coiled Tubing Unit?

Tell us your target depth, tubing size and preferred truck brand. Our engineering team will recommend the optimal truck mounted CTU configuration and provide a detailed quotation within 48 hours.