Solutions

Deep Well Intervention

Equipment for deep and high-pressure well intervention: coiled tubing units, snubbing rigs and workover units built for depth, pressure and long strings.

Overview

Why deep well intervention is different

As wells get deeper, two things rise at the same time: downhole pressure and the weight of the string. A coiled tubing unit that handles shallow cleanout at 2000 m will not reach 4500 m with the pull capacity needed to strip out a stuck string. A snubbing unit rated for medium pressure will not safely control pipe movement on a 70 MPa deep gas well. A workover rig rated at 350 tons will not pull a long, heavy casing string out of a deep hole.

The intervention task itself changes with depth. Shallow wells need cleanout and simple logging. Deep wells need milling, fishing, packer retrieval, stimulation or underbalanced operations, each of which puts a different combination of pull, push, pressure and fluid rate demand on the equipment. Sizing the spread to the actual task matters: over-specify and the project pays for unused capacity, under-specify and the rig cannot do the job when it arrives.

Overview

Coiled tubing, snubbing and workover: which tool for the job

Coiled tubing units handle continuous pipe intervention: cleanout, milling, logging, acid placement and well kill. The key ratings are pull force, push force, tubing length and well pressure rating. Deep, high-pressure wells need the heavier units in the line, sized to the string weight and the wellhead pressure.

Snubbing units handle live-well intervention: running or pulling pipe under pressure without killing the well. They are rated by pressure class and string size, and the selection depends on whether the well needs light workover or full through-tubing intervention. Remote-control snubbing units add safety by moving the crew back from the stack.

Workover rigs handle the heavier lifting: pulling and running tubing strings, casing, and long completions. For deep wells, the hook load rating and the mast height have to match the longest single pull expected on the well. Tenthousand-meter class workover rigs exist for the deepest wells, but most deep intervention jobs fit a more moderate rating.

Overview

Matching equipment to the well

Send us the measured depth, bottomhole pressure, tubing or casing size, and the intervention task planned, whether cleanout, milling, logging, packer retrieval or stimulation. We will position the right coiled tubing, snubbing or workover unit from the range, and back it up with the engineering support to confirm the rating before mobilization. The goal is equipment that arrives on location and does the job, rather than equipment that has to be upsized after the first trial.