What size pumping unit do I need?
The right unit size depends on: (1) well depth (deeper = more rod string weight = larger unit), (2) production rate (higher rate = more fluid load = larger unit), (3) fluid density (heavy oil = more weight = larger unit), (4) stroke length needed. A rough guide: shallow low-rate wells use 64–114 style units; medium-depth wells use 228–120 style units; deeper or heavy oil wells use 456+ style units. Tell us your well depth, pump setting depth, and production rate, and we will recommend the right unit size.
What's the difference between conventional and Mark II units?
Conventional units have a simple walking beam geometry with counterweights at the crank. Mark II units have a different geometry that provides variable torque —they reduce peak torque requirements, which allows a smaller motor. Mark II units are better for wells with high counterbalance requirements (deep wells, heavy oil). Conventional units are simpler, cheaper, and the most common choice for typical wells. Tell us your well characteristics, and we will recommend the right type.
Do you provide API 11E certification documentation?
Yes. All our API 11E certified pumping units come with documentation: (1) design specifications, (2) material test reports (MTRs) for critical components, (3) load test certificates, (4) API monogram documentation where applicable. This documentation is essential for operator audits and regulatory compliance. Tell us your documentation requirements, and we will provide accordingly.
Can you supply electric motor or diesel engine drive?
Yes. We supply pumping units with either electric motor drive (grid-powered, most common for permanent production) or diesel engine drive (remote locations without grid power). Electric motor drive is the standard for most onshore production —quieter, lower operating cost, easier automation. Diesel engine drive is for remote wells without grid power. Tell us your power supply situation, and we will configure accordingly.
What's the lead time for pumping units?
Standard API 11E pumping units (common sizes) are typically available in 4–6 weeks. Larger or custom configurations typically take 10–16 weeks. We keep some common sizes in stock for faster delivery. Tell us your requirements and timeline, and we will confirm availability and lead time. We can also discuss expedited options for urgent projects.