API 6A | Wellhead | Christmas Tree | Casing Head | Tubing Head

API 6A Wellhead Equipment

API 6A is the American Petroleum Institute's specification for Wellhead and Christmas Tree Equipment. It covers the pressure-containing equipment at the surface of the well: casing heads, tubing heads, tubing hangers, casing hangers, and the christmas tree (production tree). API 6A is one of the most important oilfield equipment standards —wellhead equipment is the critical interface between the wellbore and surface facilities. We supply a range of API 6A certified wellhead and christmas tree equipment for onshore and offshore production operations.

What is API 6A?

Understanding the API 6A standard:

What It Covers

API 6A covers wellhead and christmas tree equipment: casing heads, tubing heads, casing/tubing hangers, tubing spools, production trees (christmas trees), choke valves, and related pressure-containing equipment.

Why It Matters

Wellhead equipment is the primary pressure barrier at the surface. If it fails, well control is lost —potentially catastrophic. API 6A ensures that wellhead equipment meets the strictest design, material, and testing requirements. It's the most critical pressure equipment standard in oilfield operations.

Key Requirements

API 6A specifies: pressure ratings (PSI classes), material classes (AA, BB, CC, DD, EE, FF, HH), temperature ratings (K, L, P, R, S, T, U, V), performance requirements (PR1, PR2), and testing procedures. Equipment must meet all applicable classes for the service conditions.

Pressure Ratings

Common API 6A pressure ratings: 2,000 psi, 3,000 psi, 5,000 psi, 10,000 psi, 15,000 psi, 20,000 psi. The rating must match the well's formation pressure. Higher-pressure wells need higher-rated equipment.

API 6A Equipment We Supply

Our API 6A certified product range:

Equipment Description Pressure Ratings
Casing HeadsSurface casing head housing. Supports the casing string. Basis for the wellhead stack.2,000–10,000 psi
Tubing HeadsTubing head spool. Supports the tubing string. Mounted above the casing head.2,000–10,000 psi
Christmas TreesProduction tree. Controls flow from the well. Master valves, wing valves, choke.2,000–5,000 psi
Casing/Tubing HangersHangers that support the casing or tubing strings inside the wellhead.2,000–10,000 psi
Choke ValvesAdjustable and positive chokes for controlling well flow rate and pressure.2,000–5,000 psi

API 6A Material Classes

API 6A specifies material classes for different service conditions:

AA / BB / CC (Non-Corrosive)

For sweet (non-sour) service with no CO2 or H2S. Carbon steel materials. The lowest-cost option for sweet, non-corrosive wells. Used in conventional onshore production.

DD / EE (CO2 Service)

For service with CO2 (carbon dioxide) —mildly corrosive environment. Alloy steel materials with CO2 resistance. Used in many gas fields with CO2 content.

FF (H2S Service)

For sour service with H2S (hydrogen sulfide). Special sour-service materials (sour-grade steel). Required for sour gas wells. H2S is toxic and causes sulfide stress cracking.

HH (Severe Service)

For severe corrosive service (both CO2 and H2S, plus high chloride). Premium alloys (duplex, super duplex, Inconel). The highest material class for the most corrosive applications.

Wellhead vs. Christmas Tree

Understanding the difference:

Wellhead

The wellhead is the lower part of the assembly: casing head + tubing head. It supports the casing and tubing strings, provides casing/tubing annulus access, and forms the foundation for the tree. The wellhead is installed after drilling, during completion.

Christmas Tree (Production Tree)

The christmas tree (or "tree") is the upper part: mounted on top of the wellhead. It contains the production valves (master valves, wing valves) and choke. It controls production flow from the well. The tree is what you see at the surface —it looks like a "christmas tree" with all the valves.

Frequently Asked Questions

What's the difference between API 6A and API 16A?

API 6A covers wellhead and christmas tree equipment (production equipment). API 16A covers drill-through equipment (BOPs, drilling spools —drilling equipment). In simple terms: 6A is what stays on the well during production; 16A is what comes off after drilling. Both are pressure-containing equipment with similar design principles, but they serve different purposes in the well lifecycle. We supply both API 6A and API 16A equipment.

What material class do I need for my well?

It depends on the well's produced fluids: (1) sweet oil well (no H2S, low CO2): AA or BB, (2) gas well with CO2: DD or EE, (3) sour gas well (H2S present): FF (sour service), (4) severe corrosive (high H2S + CO2 + chloride): HH. Your production engineer will specify the material class based on your well's fluid composition. We supply all material classes from AA to HH. Tell us your well's fluid data, and we will recommend the right class.

What pressure rating do I need?

The wellhead/tree pressure rating must exceed the well's maximum expected wellhead pressure. General guidance: (1) shallow low-pressure wells: 2,000–3,000 psi, (2) medium-depth wells: 5,000 psi, (3) deep high-pressure wells: 10,000–15,000 psi, (4) HPHT: 15,000–20,000 psi+. Your reservoir engineer will specify the required rating. We supply from 2,000 to 15,000+ psi.

Do you provide API 6A certification documentation?

Yes. All our API 6A certified equipment comes with complete documentation: (1) material test reports (MTRs), (2) NDE (non-destructive examination) reports (radiographic, ultrasonic, magnetic particle), (3) hydrostatic test reports, (4) material class verification (sour service testing for FF/HH), (5) API monogram documentation. This documentation is essential for operator audits and regulatory compliance. Tell us your documentation requirements, and we will provide accordingly.

Can you custom-design wellhead assemblies?

Yes. We can custom-design wellhead and christmas tree assemblies to your specific requirements: custom pressure ratings, material classes, bore sizes, valve configurations, actuator options (manual, hydraulic, pneumatic). Our engineering team works with you to design the right configuration. Custom builds typically take 10–16 weeks. Tell us your requirements, and we will quote a custom solution.

Need API 6A Wellhead Equipment?

Tell us about your project: pressure rating, material class, bore size, and quantity. Our engineering team will design and supply the right API 6A certified equipment.