Wellhead Standard | Production Equipment | 2K to 15K psi

API 6A Pressure Control Equipment: Standard for Wellhead & Production

API Specification 6A (Spec 6A) is the global standard for wellhead and Christmas tree equipment —the valves, flanges, fittings, and pressure-containing components that control production from the well. If you're buying wellhead equipment, Christmas trees, or production valves, API 6A certification is the baseline requirement. It ensures the equipment is designed, manufactured, and tested to a recognized standard for pressure integrity and performance. We design and manufacture API 6A-compliant pressure control equipment —wellheads, valves, flanges, and fittings —with complete certification documentation. Every unit is built to the standard, pressure-tested, and supplied with material traceability.

What Does API 6A Cover?

Wellhead Equipment

Casing heads, tubing heads, and hangers. The wellhead is the interface between the wellbore and surface production equipment. It suspends casing and tubing strings, and provides pressure sealing.

Christmas Trees

The assembly of valves, fittings, and chokes that controls production flow from the well. Christmas trees range from simple 2-valve trees for low-pressure wells to complex multi-valve trees for high-pressure gas wells.

Valves & Fittings

Gate valves, check valves, choke valves, and flange fittings. These are the building blocks of the wellhead and production system. All pressure-containing components must meet API 6A specifications.

Flanges & Connections

API 6A flanges and connections define the standard dimensions, pressure ratings, and sealing interfaces. This ensures compatibility between equipment from different manufacturers.

API 6A Pressure Ratings

API 6A equipment is available in standard pressure ratings:

Pressure Rating Working Pressure Typical Application
2,000 psi (2K) Low pressure Shallow wells, low-pressure production
3,000 psi (3K) Medium-low pressure Standard onshore production wells
5,000 psi (5K) Medium pressure Most common onshore production
10,000 psi (10K) High pressure Deep wells, high-pressure gas
15,000 psi (15K) Ultra-high pressure HPHT wells, deep gas

Frequently Asked Questions

What's the difference between API 6A and API 16A?

API 6A covers wellhead and Christmas tree equipment used for production —the equipment that stays on the well after drilling is complete. API 16A covers blowout preventers (BOPs) used during drilling and workover —the well control equipment that temporarily sits on the well while drilling. Different standards for different purposes. If you're buying production wellhead equipment, it's API 6A. If you're buying BOPs for drilling, it's API 16A.

Do you provide API 6A certification documentation?

Yes. Every API 6A component we manufacture comes with complete documentation: material certificates (mill test reports), pressure test reports, dimensional inspection records, and a declaration of conformity. We can also provide third-party inspection (SGS, BV, DNV) on request. Our documentation is designed to help you pass regulatory audits and operator equipment inspections.

What material grade should I choose (AA through HH)?

API 6A defines material grades from AA (lowest) to HH (highest), based on corrosion resistance and sour service capability. AA/BB/CC are standard carbon steel for sweet (non-sour) service. DD/EE are for higher strength and some corrosion resistance. FF/HH are for sour service (H2S-containing wells) per NACE MR0175. Tell us your well conditions (sweet vs sour, H2S content, CO2 content), and we'll recommend the right material grade.

Need API 6A Wellhead or Production Equipment?

Tell us your pressure rating, material grade, and application. We'll design and manufacture API 6A-compliant equipment with complete certification documentation —built to the standard, tested, and ready for service.