Well Control & Fluid Handling

High Pressure Fluid Control Equipment

High pressure fluid control equipment is the critical link between your surface equipment and the wellbore. From BOPs and choke & kill manifolds to high pressure valves, flanges and hoses —every component must handle extreme pressure reliably. We supply a complete range of API-compliant high pressure fluid control equipment for oilfield operations.

High pressure fluid control equipment

What Is High Pressure Fluid Control Equipment?

High pressure fluid control equipment refers to all surface and downhole components that contain, direct, and control the flow of high-pressure fluids in oil and gas operations.

Well Safety

The primary purpose of high pressure fluid control equipment is well safety. BOPs, chokes, and valves are designed to contain well pressure and prevent blowouts —the most serious hazard in oilfield operations.

Flow Direction

Beyond safety, this equipment directs flow: where fluids go, at what pressure, and at what rate. Manifolds route flow between pumps, tanks, treatment lines, and the wellbore.

Pressure Rating Matters

Every component has a pressure rating (psi or MPa). Operating above the rated pressure is dangerous and can cause catastrophic failure. All our equipment is rated and tested to its stated working pressure.

API Standards

High pressure oilfield equipment is built to API standards (API 6A, API 16A, API 16C, etc.). These standards ensure design, material, and manufacturing consistency across the industry.

Our High Pressure Fluid Control Equipment Range

We supply a complete range of high pressure fluid control components and systems.

BOP Stacks

Blowout preventers (BOPs) —annular and ram type —for well control during drilling, workover and intervention operations. Rated up to 105 MPa (15,000 psi).

Choke & Kill Manifolds

Choke manifolds for well pressure control during well control incidents. Kill manifolds for pumping kill mud into the well. API 16C compliant.

High Pressure Valves

Gate valves, ball valves, plug valves and check valves in sizes from 1" to 4" and pressures from 70 MPa to 105 MPa. Trim options for various fluids and service conditions.

Flanges & Fittings

API 6A flanges (wellhead, crossover, adapter), tees, elbows, and other high pressure fittings. Available in various pressure ratings and connection types.

High Pressure Hoses

High pressure flexible hoses for pumping lines, cementing lines, and fracturing lines. Rated to working pressure with safety factor. End fittings and pressure rated.

Standpipe & Rotary Hose

Standpipe, rotary hose, and vibration hose for drilling rigs. High pressure, high flow capacity, built for continuous drilling service.

Common Pressure Ratings

High pressure fluid control equipment is available in several standard pressure ratings. The rating you need depends on your well conditions and operation type.

Pressure Rating Equivalent Typical Applications
21 MPa (3,000 psi) 3,000 psi class Low pressure applications, surface flow lines
35 MPa (5,000 psi) 5,000 psi class General well control, standard workover
70 MPa (10,000 psi) 10,000 psi class High pressure drilling, workover, fracturing, cementing
105 MPa (15,000 psi) 15,000 psi class Ultra-high pressure wells, deep drilling, HP/HT applications

Applications

Our high pressure fluid control equipment is used across a wide range of oilfield operations.

Drilling Operations

Standpipe, rotary hose, BOP stack, choke & kill manifold —the core well control system for drilling rigs. Critical for well safety during all drilling operations.

Workover & Intervention

BOPs, control manifolds, and valves for workover rigs and coiled tubing units. Well pressure containment during tubing running, pulling, and intervention operations.

Cementing Operations

High pressure cementing lines, manifolds, and valves. Designed for the abrasive cement slurry environment. Reliable under continuous high pressure pumping.

Fracturing Operations

High pressure fracturing manifold, missile, and flow lines. Built for the extreme pressure and proppant-laden fluid environment of hydraulic fracturing.

Well Testing & Production

High pressure production manifold, choke manifold, and safety valves. Used during well testing, production testing, and early production operations.

Pressure Testing

High pressure testing pumps, gauges, and connectors. Used to pressure test wellheads, pipelines, and equipment before service.

Frequently Asked Questions

What pressure rating do I need for my operation?

It depends on your well conditions and operation type. Most onshore workover and drilling applications use 70 MPa (10,000 psi) rated equipment. For deeper, higher-pressure wells, you may need 105 MPa (15,000 psi). For low-pressure production applications, 35 MPa (5,000 psi) may be sufficient. Tell us your well pressure and operation type, and we will recommend the right rating.

Do your high pressure valves and fittings meet API standards?

Yes. All our high pressure fluid control equipment is designed and manufactured to relevant API standards: API 6A (wellhead and tree equipment), API 16A (drilling and production hoisting equipment), API 16C (choke and kill systems), API 6D (pipeline valves). We provide material test reports and certification documentation with every order.

Can you supply complete manifold packages, or just individual valves?

We supply both individual components and complete manifold packages. A complete manifold package includes: manifold frame, valves, choke, pressure gauges, connections, and piping. We design the complete system to match your specific flow requirements and pressure rating. Tell us your requirements, and we will design the right manifold for your operation.

What's the difference between API 6A and API 16A?

API 6A covers wellhead and Christmas tree equipment —the permanent or semi-permanent equipment at the wellhead. API 16A covers drilling and production hoisting equipment —BOPs and other temporary well control equipment used during drilling and workover. Both are API standards, but they apply to different types of equipment for different purposes.

Do you supply replacement parts for BOPs and manifolds?

Yes. We supply replacement parts for most common BOP and manifold makes and models. This includes: ram elements, seals, gaskets, valves, operators, and control components. Tell us what equipment you have and what parts you need, and we will quote accordingly.

Need High Pressure Fluid Control Equipment?

Tell us your pressure rating, size, and application. Our engineers will help you choose the right valves, manifolds and fittings for your operation.