Self-Contained | No External Power | Remote Locations

Diesel Drive Pump Unit: Self-Contained High-Pressure Pumping

A diesel drive pump unit combines a high-pressure reciprocating pump with a diesel engine prime mover on a single skid or trailer. It is completely self-contained —just add fuel and connect hoses, and it's ready to pump. No external power supply required. This is the standard configuration for remote oilfield locations.

Diesel drive pump unit skid mounted

When to Choose Diesel Drive

Diesel drive pump units are the right choice when:

  • The well site has no grid power or reliable generator supply
  • You need to move the pump between remote well sites frequently
  • Self-containment matters —you want to show up, start the engine, and start pumping
  • The pump will be used for temporary jobs (well testing, frac, cementing) rather than permanent installation
  • You don't want to deal with electrical wiring, motors and VFD controls on location

If you have a permanent installation with reliable power, an electric drive pump unit may be more efficient and quieter. For mobile or remote work, diesel drive is the practical choice.

What's Included in a Diesel Drive Pump Unit

Diesel Engine

Industrial diesel engine (Cummins, Caterpillar, Weichai or equivalent) rated for continuous duty. Sized to provide the required horsepower at the pump's operating pressure and flow. The engine includes cooling system, air cleaner, exhaust and fuel system.

High-Pressure Pump

Triplex or quintuplex reciprocating plunger pump matched to the application. Pressure and flow depend on the job: cementing (40-70 MPa, 100-250 L/min), fracturing (70-105 MPa, 1500-2500 L/min), well testing (35-70 MPa).

Transmission & Clutch

Flexible coupling or gearbox between engine and pump. Includes clutch for engine startup and pump engagement. Torque converter optional for smoother operation. The transmission matches engine RPM to pump speed requirements.

Base Skid & Controls

Common skid base with engine, pump and accessories mounted. Control panel with engine gauges, pressure gauge, and throttle control. Optional: data recorder, emergency shutdown, remote control.

Typical Specifications

Parameter Typical Range
Engine power 150 - 2500 HP (varies by pump size)
Pump type Triplex or quintuplex plunger pump
Working pressure 35 - 105 MPa
Flow rate 100 - 2500 L/min
Fuel consumption 40 - 200 L/hour (varies by load)
Mounting Skid mounted or trailer mounted

Frequently Asked Questions

How much fuel does a diesel pump use?

Fuel consumption depends on engine size and load. A typical 300 HP diesel pump uses about 40-60 liters per hour at full load. A 1000 HP frac pump uses about 150-200 liters per hour. At partial load, consumption is proportionally less. Over a 10-hour day, that's 400-2000 liters of diesel. Fuel cost is a major operating expense for diesel drive equipment —another reason electric drive is preferred for permanent installations.

Can I mount the pump unit on a truck?

Yes. Diesel drive pump units are commonly mounted on truck chassis for road mobility. The skid-mounted version can be placed on a truck bed, or we can supply the unit pre-mounted on a truck chassis. Truck mounted pump units are standard for cementing and fracturing service companies that need to move between well sites frequently.

What is the difference between diesel drive and electric drive pumps?

Diesel drive uses a diesel engine as prime mover —self-contained, works anywhere, but uses fuel and produces emissions and noise. Electric drive uses an electric motor with VFD —quieter, cleaner, more efficient, but requires a power source. Diesel drive is mobile and independent; electric drive is efficient but dependent on power. Choose based on your location and operating pattern.

Need a Diesel Drive Pump Unit?

Tell us your required pressure, flow rate and mounting preference. Our engineering team will recommend the right pump configuration and provide a quote within 48 hours.