Single Pump Cementing Truck: Compact Solution for Small-Scale Cementing
A single pump cementing truck carries one triplex plunger pump on a truck chassis. It is simpler, lighter and less expensive than a twin-pump unit. Ideal for shallow wells, slimhole cementing, and remedial cementing work where you don't need dual-pump redundancy.
When to Choose a Single Pump Unit
A single pump cementing truck makes sense when:
- Well depth is moderate (under 3,000 m) and cementing volumes are small
- You are doing remedial cementing (plugbacks, squeeze cementing) rather than primary cementing of large casing strings
- Mobilization cost matters —a single truck is faster to move and cheaper to operate
- Your fleet includes smaller rigs and workover units that don't need full-size cementing support
- You have limited road access and need a compact, maneuverable unit
If your operation demands dual-pump redundancy for critical primary cementing, or needs very high flow rates for long casing strings, you should look at a twin-pump cementing truck instead.
Typical Specifications
| Parameter | Typical Range |
|---|---|
| Pump type | Single triplex plunger pump |
| Max working pressure | 40 - 70 MPa |
| Max flow rate | 100 - 250 L/min |
| Engine power | 260 - 400 HP |
| Mixing capacity | 1 - 2 m³ batch mixer |
| Truck chassis | 6x4 or 8x4 heavy duty |
Frequently Asked Questions
Can a single pump unit handle primary cementing?
Yes, for small casing strings (7" or smaller) and moderate depths. Single pump units are commonly used for primary cementing of intermediate and production casing in smaller drilling operations. For large 13-3/8" or 20" surface casing, or for deep wells where cement returns are critical, a twin-pump unit provides better reliability and higher flow rate.
What is the difference between single pump and twin pump?
A single pump unit has one triplex pump; a twin pump unit has two. Twin pump units provide redundancy (if one pump fails, the other can continue) and higher combined flow rate. They are also more expensive and heavier. Choose single pump when budget and mobilization speed are priorities; choose twin pump when reliability and high flow are critical.
What truck chassis do you use?
We use heavy-duty 6x4 or 8x4 chassis from leading manufacturers (Sinotruk Howo, Shacman, Dongfeng, etc.) depending on your preference and local availability. The chassis is selected based on the total weight of the pump, engine, mixer and accessories. We can also mount the unit on a customer-supplied chassis if required.
Need a Single Pump Cementing Truck?
Tell us your required pressure, flow rate and preferred chassis. Our engineering team will recommend the right configuration and provide a quote within 48 hours.