Shale Gas Multi-Well Pads
Horizontal shale gas wells require multiple fracturing stages. Pump trucks are driven from stage to stage on the same pad, then moved to the next well when complete.
A fracturing pump truck mounts a high-pressure reciprocating pump on a heavy-duty truck chassis. It provides the mobility and pumping capacity required for hydraulic fracturing operations across multiple well sites and remote oilfield locations.
A fracturing pump truck is the mobile version of a fracturing unit. It combines the pumping equipment with a heavy-duty truck chassis, allowing the equipment to be driven between well sites without needing additional transport.
Our pump truck lineup covers the full range from medium-rate jobs to ultra-large shale gas fracturing spreads:
| Model | Power Rating | Max Pressure | Max Flow Rate | Chassis Type |
|---|---|---|---|---|
| SJF2000 Truck | 2,000 HHP | 105 MPa (15,200 psi) | 1.6 m³/min | 8x4 heavy duty |
| SJF2500 Truck | 2,500 HHP | 105 MPa (15,200 psi) | 2.0 m³/min | 8x4 heavy duty |
| SJF3000 Truck | 3,000 HHP | 120 MPa (17,400 psi) | 2.4 m³/min | 10x6 heavy duty |
| SJF4000 Truck | 4,000 HHP | 140 MPa (20,300 psi) | 2.8 m³/min | 10x6 / 12x8 heavy duty |
| SJF5000 Truck | 5,000 HHP | 140 MPa (20,300 psi) | 3.2 m³/min | 12x8 heavy duty |
The choice between truck-mounted and skid-mounted depends on your operating model:
| Factor | Truck-Mounted | Skid-Mounted |
|---|---|---|
| Mobility | Self-propelled, road-ready between wells | Requires crane for lifting, not road-mobile |
| Setup Time | Drive-on, connect hoses, ready to work | Bolt down, connect utilities, longer setup |
| Best For | Multi-well pads, mobile service fleets | Offshore platforms, permanent well sites |
| Cost | Higher (includes truck chassis and cab) | Lower (no chassis/cab cost) |
| Weight | Heavier due to chassis | Lighter, more compact footprint |
| Fuel Consumption | Higher (heavier vehicle, transport fuel) | Lower (fixed installation, no transport) |
Horizontal shale gas wells require multiple fracturing stages. Pump trucks are driven from stage to stage on the same pad, then moved to the next well when complete.
Service companies operate fleets of pump trucks that move between client well sites. The truck chassis allows rapid mobilization and demobilization between jobs.
In remote oilfields with poor road infrastructure, pump trucks must navigate rough terrain. Heavy-duty chassis with high ground clearance are essential.
When a well needs urgent stimulation, pump trucks can be mobilized quickly. No need to wait for crane transport —the truck drives to the location directly.
Browse our standard fracturing pump trucks. All models are built on heavy-duty chassis and include API 6A certified fluid ends.
Our pump trucks use heavy-duty chassis from major manufacturers (Dongfeng, Sinotruk, Shacman, Volvo). Multi-axle configuration for road compliance and load distribution.
All fluid ends meet API 6A specifications. Hydrostatic testing at 1.5x working pressure is performed on every unit before shipment.
For proppant service, we offer tungsten carbide coated plungers and valve seats. This extends component life by 2-3x compared to standard chrome plating.
Each pump truck includes a PLC-based control system with touchscreen HMI. Monitors pump speed, discharge pressure, flow rate and engine parameters in real-time.
All job data is logged: time, pressure, rate, density. Export as CSV for post-job analysis and regulatory reporting.
Our engineers provide commissioning, operator training and troubleshooting. Critical wear parts are stocked in regional warehouses for fast delivery.
The terms are closely related. A "frac pump truck" specifically refers to a truck-mounted fracturing unit. A "frac unit" can be truck-mounted, trailer-mounted or skid-mounted. The pumping equipment itself is the same; the difference is how it is transported and installed.
A typical shale gas fracturing stage requires 15-25 m³/min total flow rate. If each pump truck delivers 2.0 m³/min, you need 8-12 trucks running in parallel. Most modern spreads use 10-15 trucks total, with 1-2 spare for redundancy.
We can mount on chassis from major manufacturers: Dongfeng, Sinotruk, Shacman (Chinese brands) or Volvo, Mercedes-Benz, MAN (international brands). We adapt the installation to your local road regulations and weight limits.
On public roads, a loaded pump truck typically travels at 60-80 km/h. On location (between wells on the same pad), speeds are much slower —5-15 km/h depending on terrain. The truck is designed for heavy-load transport, not highway speed.
Standard configuration pump trucks take approximately 8-10 months from order confirmation. Custom configurations (special chassis, climate packages, electric drive) may require 10-12 months. Refurbished or near-stock units can be delivered in 60-90 days.
Tell us your target flow rate, treating pressure and chassis preference. Our engineering team will recommend the right pump truck configuration and provide a detailed quotation within 48 hours.