Fracturing-Equipment

SYL600 70 Fracturing Pump Truck

Syl600 70 Fracturing Pump Truck is a truck-mounted fracturing pump package for high-horsepower stimulation. The shortlist starts with pressure rating and power arrangement and the control package.

SYL600-70 Fracturing Pump Truck, 600hp, 70MPa diesel truck-mounted
Product description

SYL600-70 Fracturing Pump Truck

The SYL600-70 is a truck-mounted fracturing pump rated for 70 MPa (10,000 psi) working pressure with a 700 hp diesel engine. It is the entry-level unit in our YLC70 series, designed for shallow well stimulation, acidizing, water injection well fracturing, and workover pressure pumping where a full-size 2000-2500 hp frac spread would be overkill.

Mounted on a 6x4 heavy-duty truck chassis, the SYL600-70 drives a triplex plunger pump through a mechanical transmission. The compact footprint and single-truck mobility make it suitable for marginal fields, scattered well locations, and urban-fringe operations where larger frac trucks cannot access the location.

Technical Highlights

What this pump is built for

Power End

700 hp diesel, mechanical drive

Cummins or domestic 700 hp diesel engine rated for continuous duty. A mechanical transmission (manual or automatic) connects the engine to the pump gearbox. No VFD, no electric motor —simpler, cheaper to maintain, and easier to repair in remote fields.

Fluid End

Triplex plunger pump, 70 MPa

A 3-inch plunger triplex pump delivers 70 MPa working pressure at rated flow. The fluid end is equipped with modular valve seats and quick-change plungers, so a field mechanic can replace valves in 30–45 minutes without pulling the whole pump.

Chassis

6x4 truck-mounted, road legal

Mounted on a 6x4 heavy-duty truck chassis (Sinotruk, Shacman or equivalent). The entire unit —engine, transmission, pump, suction manifold and control cabin —is on one truck. No disassembly needed for road transport; drive it to the well location and start pumping.

Control Cabin

Stand-alone operator cabin

An air-conditioned operator cabin is mounted on the truck, with pressure gauges, engine controls, and a data recorder for treating pressure and rate. The operator can run the pump from inside the cabin, away from high-pressure lines.

Suction System

8-inch suction manifold

An 8-inch suction line with a centrifugal charge pump ensures adequate net positive suction head (NPSH) for the triplex pump, even at high rates. A suction strainer catches debris before it enters the fluid end.

Mobility

Single-truck mobility

The entire frac unit is one truck. No trailer, no separate power skid, no disassembly for relocation. For scattered wells in marginal fields, this is the key advantage —move from one well to the next in 2–4 hours, rig up, and start pumping.

Applications

Where this pump fits

  • Shallow well fracturing: 1500–3000 m wells where 70 MPa is sufficient and a 2000 hp pump is overkill.
  • Acidizing and matrix stimulation: acid jobs at 40–70 MPa, where flow rate is moderate but pressure matters.
  • Water injection well fracturing: hydraulic fracturing of injection wells for enhanced water flood in mature fields.
  • Workover pressure pumping: pressure testing, cement plug drill-out, and workover stimulation where a full frac spread is not available.
  • Marginal and scattered fields: small oilfields with 5–10 wells, where mobilizing a full frac spread is uneconomical.
Selection Guide

Is the SYL600-70 right for small frac jobs, or will it struggle on bigger treatments?

The SYL600-70 is a 700 hp, 70 MPa mechanical-drive frac pump truck — the entry level of the SJ Petro fracturing pump range. It is a single unit: engine, transmission, triplex pump, suction manifold, and control cabin all on one 6x4 truck. Its role is small-volume stimulation, acidizing, and mini-frac jobs where you do not need a 2,500 hp pump's flow rate.

Choose this pump truck when:

  • Job size is small: < 100 m³ fluid, < 20 t proppant. This pump delivers enough flow for mini-fracs, breakdown jobs, acid stimulation, and small formation treatments. Large multi-stage fracs need higher-flow pumps.
  • Treating pressure is up to 70 MPa. The 70 MPa rating covers most shallow-to-medium depth wells. If your design calls for 90+ MPa treating pressure (deep tight gas, HPHT), step up to the SYL2300/2500 class.
  • Simplicity and repairability matter. The mechanical drive (no VFD) and modular valve seats (replace valves in 30–45 minutes without pulling the pump) make this a good fit for remote fields with basic workshop support.
  • You need road-legal mobility. The 6x4 truck drives to location directly — no trailers, no disassembly. If you move between wells daily and job sizes are small, this is the lowest-cost way to own frac capability.

SYL600-70 vs a 2,300 hp frac pump — what do you give up?

  • SYL600-70 (this pump): Lower flow rate, lower upfront cost, simpler maintenance, road-legal single truck. Right for small jobs and operators entering frac services.
  • SYL2300Q-105Q (2,300 hp): 3x the flow, higher pressure (105 MPa), but needs trailers, more power, and costs several times more. Right for large multi-stage frac campaigns.
How It Works

Pumping sequence

On arrival at the well site, the truck is parked within 10–15 m of the wellhead. The suction line is connected to the mixing tank or blender, and the discharge line is run to the manifold. The engine is warmed up, the transmission is engaged, and the operator ramps up pump speed from the control cabin.

Treating pressure is monitored on gauges and logged on the data recorder. The operator adjusts pump speed to maintain the target rate and pressure. For acid jobs, corrosion inhibitors and pH monitoring are added. Typical job duration is 2–4 hours per stage.

Configuration Options

Common selections

  • Electric drive conversion: replace diesel engine with electric motor for gas-fired or grid-connected locations.
  • Higher pressure version: 105 MPa (15,000 psi) fluid end for deeper wells.
  • Cold weather package: engine pre-heaters, heated cabin, arctic hydraulic fluid for -30C service.
  • Data van integration: link to a central data van for real-time pressure and rate monitoring.
  • Spare parts kit: valve seats, plungers, seals and gaskets for 500 hours of field operation.
FAQ

Buyer questions

Q: What size plunger gives what flow rate at 70 MPa?
A: With a 3-inch plunger:

Q: Can this pump handle acid?
A: Yes, with acid-resistant fluid end (stainless steel valves and acid-grade plungers). We specify the acid-resistant package when ordering.

Q: How many trucks are needed for a typical frac job?
A: For shallow wells at 70 MPa, 2–4 SYL600 trucks can run in parallel. For deeper wells at 105 MPa, you would use larger pumps (SYL2300 or SCF series).

Q: What is the lead time?
A: 4–6 months for a new truck-mounted unit. Refurbished units available in 60–90 days.

Q: Do you supply the mixing truck too?
A: Yes. We can supply a complete spread: SYL600 pump trucks, SHS20 sand blending truck, and a manifold truck as a package.

Why SJ Petro

Manufacturing background

SJ Petroleum Machinery is a factory-direct manufacturer of oilfield equipment. We have built fracturing pumps since the 1980s. The YLC70 series is our entry-level product line, with over 500 units delivered to operators in the Middle East, Central Asia, Africa and Southeast Asia. Each pump is factory-tested under pressure before shipment, and we supply commissioning, operator training and spare parts on site.

Get a Quote

Ready to discuss this model?

Send your target depth, treating pressure, flow rate requirement, and well location. We will return a tailored pump configuration and pricing within 48 hours.

Product Parameters

Parameter table

ModelMax. working pressure MPa(psi)Power of Engine W(hp)
SYL600-70(YLC70-670)70(10000)700(520)
SYL400-70(YLC70-300)70(10000)540(403)
SYL300-70(YLC70-265)70(10000)450(336)
Related products

More from Fracturing-Equipment

Automated Continuous Sand Conveying Units
Automated-continuous-sand-conveying-units

Automated-continuous-sand-conveying-units

Automated Continuous Sand Conveying Units combines sand blending package duties with a field-deployable layout. Buyers usually check pumping duty and sand handling, automatic sequence control, and field operation.

View details
Dry Fracturing Equipment
Dry-Fracturing-Equipment

Dry-Fracturing-Equipment

Dry Fracturing Equipment is a field-deployable fracturing spread package for high-horsepower stimulation. The shortlist starts with pumping duty and sand handling and the control package.

View details
Fracturing Fluid Continuous Mixing Truck
Fracturing-fluid-continuous-mixing-truck

Fracturing-fluid-continuous-mixing-truck

Fracturing Fluid Continuous Mixing Truck suits buyers who need high-horsepower stimulation in a truck-mounted format. Its fit depends on pumping duty and sand handling and the project duty cycle.

View details
Fracturing Manifolds Truck
Fracturing-Manifolds-Truck

Fracturing-Manifolds-Truck

Fracturing Manifolds Truck is a truck-mounted fracturing spread package for high-horsepower stimulation. The shortlist starts with pumping duty and sand handling and the control package.

View details
Full Electric Drive Fracturing Continuous Mixing Skid
Full-electric-drive-fracturing-continuous-mixing-skid

Full-electric-drive-fracturing-continuous-mixing-skid

Full Electric Drive Fracturing Continuous Mixing Skid suits buyers who need high-horsepower stimulation in a skid-mounted format. Its fit depends on pumping duty and sand handling and the project duty cycle.

View details
Instrument Vans
Instrument-Vans

Instrument-Vans

Instrument Vans suits buyers who need high-horsepower stimulation in a field-deployable format. Its fit depends on pumping duty and sand handling and the project duty cycle.

View details