Key parameters to confirm before ordering
- Stage count per well: 10 / 30 / 50+
- Fluid volume per stage: Medium / High
- Power source: Diesel / Electric / Hybrid
- Site type: Remote / Pad / Urban-sensitive
- Emission requirements: Standard / Low-emission / Zero-emission
Equipment for this application
Need help choosing?
Send us your well program, site conditions, and operating requirements. Our engineers will recommend the right configuration within 48 hours.
Contact Our EngineersHow to Choose the Right Fracturing Equipment
Fracturing spreads range from single diesel pump trucks to full electric fleets. The right choice depends on stage count, fluid volume, site power supply and environmental regulations.
Step 1: Decide Diesel or Electric
Diesel pumper trucks for remote locations with no grid. Electric skids (SCF series) for pad sites with power. Electric is quieter, lower emissions and lower operating cost. Diesel is more mobile.
Step 2: Match Power to Stage
5000 HP units for moderate shale stages. 8000 HP units for high-rate, high-pressure jobs. Total fleet power should match your planned stage rate per day.
Step 3: Plan the Blender
Continuous blending truck for mobile spreads. Electric blender skid for permanent pads. Sand conveying units feed the blender. All three must be sized together.
Step 4: Pressure and Flow
Conventional shale: 70-105 MPa. Ultra-high pressure: 140 MPa. Flow rate depends on stage volume. Oversized pump wastes money; undersized pump limits stage design.
Common Mistakes
Underestimating sand delivery rate. Forgetting manifold pressure rating. Choosing diesel when grid power is available. We help you size the full spread.
Need Equipment for Your Region?
Tell us your stage plan and site conditions. We will design the right fracturing spread.
How many frac trucks do I need for a pad?
Calculate based on stage rate and available time. Typical 12-well pad: 6-8 electric frac trucks, 1 blender, 2 sand conveyors.
Electric vs diesel: what is the payback?
Electric frac trucks cost 20-30% more upfront, but save 30-40% on fuel. Payback in 2-3 years for continuous operation. We model ROI for your fleet.
What blender capacity do I need?
Blender rate should exceed your maximum slurry rate by 20%. 20-40 m³/min blenders standard. Higher capacity for large pad operations.