SCF8000 All-Electric Fracturing Skid
8000 hp all-electric fracturing skid, 72+ hour continuous full-load operation, zero diesel emissions. This 8000 hp fracturing unit (105 MPa working pressure) is designed for professional oilfield service companies who need reliable, field-proven fracturing equipment that performs consistently under continuous hydraulic fracturing duty.
SJ Petroleum Machinery manufactures this 105 MPa fracturing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Working pressure: 105 MPa
The 8000 hp electric motor and drivetrain are rated for continuous fracturing pump duty. Critical components (electric motor, control system) are sourced from reputable manufacturers with global service support.
Power: 8000 hp all-electric
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, motor controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This 8000 hp all-electric fracturing skid is the ultimate solution for:
- Super-large shale gas fields: Maximum power output for the largest scale shale gas development projects
- Environmentally sensitive areas: All-electric design with zero emissions and minimal environmental footprint
- 72+ hour continuous operations: Engineered for extended full-load operation in mega-scale fracturing campaigns
- Future-proof fracturing: State-of-the-art electric technology for next-generation oilfield operations
SCF8000 all-electric skid — the "continuous full-load" difference
The SCF8000 is an 8,000 hp all-electric frac skid rated at 105 MPa. The key phrase in its name is "continuous full load" — unlike diesel engines that derate in heat or fatigue over long shifts, the electric motor sustains its full rated output for the entire stage, stage after stage. This is what makes it the backbone of large all-electric frac fleets.
Choose the SCF8000 when:
- Your campaign is high-volume with long continuous pump hours. Multi-stage wells run pumps for 3–8 hours per stage, many stages per well. Electric motors hold full load indefinitely; diesel engines lose 5–10% output in heat and need more downtime. Over a 30-stage well, that difference is real production time.
- You have ~6 MW of reliable power per skid. 8,000 hp electric draws about 6 MW. All-electric pads typically run a central power station (gas turbines or grid tie-in). If your pad has that, the SCF8000 delivers the lowest cost per frac-hour.
- You want the fewest units on the pad. At 8,000 hp per skid, four SCF8000 units replace roughly 14–16 diesel pumps. The pad footprint shrinks dramatically — less real estate, fewer connections, simpler logistics.
- Emissions and noise constraints are strict. Zero on-site exhaust and much lower noise than diesel fleets. This matters for urban-adjacent plays, environmentally sensitive areas, and operators with ESG reporting obligations.
SCF8000 vs SYL8000DQ — two 8,000 hp electric skids, what is different?
- SYL8000DQ: Four 2,000 hp motors in one skid. More motor-level redundancy within the unit (one motor can fail and three keep running at reduced output).
- SCF8000 (this skid): Single 8,000 hp motor. Simpler drivetrain, fewer motors to maintain, and continuous full-load rating is the design focus. If the single motor fails, the whole skid is down — pair units for fleet-level redundancy.
Operating sequence
The hydraulic fracturing operation follows these key steps:
- Site setup: Frac unit positioned at wellhead, high-pressure iron connected to manifold and wellhead
- Pre-job checks: Operator verifies pump condition, pressure safety valves, and data acquisition system calibration
- Slurry preparation: Sand blender mixes proppant with fracturing fluid at controlled concentration
- Pumping stage: Frac pump delivers high-pressure slurry at controlled rate, operator monitors pressure and proppant concentration
- Stage completion: After each stage, well is flushed and pressure is monitored before next stage
Common selections
- Gas turbine generator grid connection: customized configuration tailored to your field conditions
- direct grid power: customized configuration tailored to your field conditions
- remote unmanned operation.: customized configuration tailored to your field conditions
- Automated control system: PLC-based control with touchscreen HMI
- Data acquisition and recording: real-time monitoring and data logging
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete fracturing spread for shale gas stimulation?
A: Yes. We can supply complete fracturing spreads for shale gas and tight oil stimulation: frac pumps, sand blenders, manifolds, and data vans as a package, engineered to work together for onshore oilfield hydraulic fracturing projects.
Q: Can you customize fracturing units for high-pressure and high-volume operations?
A: Yes. We customize fracturing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need diesel, electric, or hybrid configurations, send your site conditions and we will return a tailored frac unit configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has over 30 years of experience manufacturing fracturing equipment for oilfield stimulation. Our fracturing trucks, blenders, and sand handling units have been deployed in shale gas and tight oil operations across North America, the Middle East, and Central Asia. All units are API-certified and available with diesel, electric, or hybrid drive options to match your field conditions and emission requirements.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.