SYL8000DQ Electric Fracturing Skid
8000 hp electric fracturing skid unit, 4x2000 hp motors in parallel, driven by gas-fired generators or grid power. This electric-drive fracturing unit (105 MPa working pressure) is designed for professional oilfield service companies who need reliable, field-proven fracturing equipment that performs consistently under continuous hydraulic fracturing duty.
SJ Petroleum Machinery manufactures this 105 MPa fracturing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Working pressure: 105 MPa
The electric motor and VFD drivetrain are rated for continuous fracturing pump duty. Critical components (electric motor, control system) are sourced from reputable manufacturers with global service support.
Total power: 8000 hp (4x2000 hp)
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, motor controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This 8000 hp electric fracturing skid is the ultimate solution for:
- Large shale gas fields: High-power electric drive for large-scale shale gas development programs
- 72+ hour continuous operations: Engineered for extended full-load operation in mega-scale fracturing campaigns
- HSE-sensitive well locations: Zero emissions and reduced noise for environmentally sensitive areas
- Future-proof fracturing technology: State-of-the-art electric technology for next-generation oilfield operations
Is an 8,000 hp electric frac skid the right move for your fleet?
The SYL8000DQ is a single skid housing four 2,000 hp electric motors driving one 105 MPa frac pump — 8,000 hp total in one unit. It replaces the traditional spread of 4–5 diesel pumps with one skid. The trade-off is infrastructure: it needs grid or large generator power, but delivers the lowest per-horsepower operating cost and the smallest footprint of any frac pump class.
Choose this electric skid when:
- You have grid power or a large dedicated generator at the pad. 8,000 hp electric draws roughly 6 MW. If your pad has grid access (increasingly common on modern shale pads) or you run a central power station, electric frac is the most economical option. If you are fully remote with no power, stick with diesel.
- Fuel cost and emissions are major concerns. Electric motors are ~95% efficient versus ~35–40% for diesel engines at the pump. On a large multi-stage campaign, this cuts energy cost roughly in half and eliminates on-site diesel exhaust — important where emissions regulations or ESG requirements apply.
- Pad footprint matters. One 8,000 hp skid replaces 4–5 diesel pump trucks. On a tight pad with limited real estate, this frees space for blending and sand equipment, and reduces the number of units on location.
- You want fewer units to maintain. Electric motors need far less maintenance than diesel engines (no oil changes, no fuel systems, no exhaust aftertreatment). With 4 pumps in one skid, you maintain one unit instead of five.
Electric 8,000 hp skid vs diesel 2,300 hp spread — how do the economics compare?
- Diesel spread (4 × SYL2300Q): Flexible anywhere, no power infrastructure, but higher fuel cost, more units, more maintenance, more emissions. Best for remote pads without grid power.
- Electric skid (this unit): Highest upfront cost, needs ~6 MW power, but halves energy cost, shrinks the pad footprint, and cuts maintenance. Pays back on high-volume campaigns with grid access.
Operating sequence
The hydraulic fracturing operation follows these key steps:
- Site setup: Frac unit positioned at wellhead, high-pressure iron connected to manifold and wellhead
- Pre-job checks: Operator verifies pump condition, pressure safety valves, and data acquisition system calibration
- Slurry preparation: Sand blender mixes proppant with fracturing fluid at controlled concentration
- Pumping stage: Frac pump delivers high-pressure slurry at controlled rate, operator monitors pressure and proppant concentration
- Stage completion: After each stage, well is flushed and pressure is monitored before next stage
Common selections
- Gas generator grid connection: customized configuration tailored to your field conditions
- direct grid power: customized configuration tailored to your field conditions
- remote monitoring system.: customized configuration tailored to your field conditions
- Automated control system: PLC-based control with touchscreen HMI
- Data acquisition and recording: real-time monitoring and data logging
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete fracturing spread for shale gas stimulation?
A: Yes. We can supply complete fracturing spreads for shale gas and tight oil stimulation: frac pumps, sand blenders, manifolds, and data vans as a package, engineered to work together for onshore oilfield hydraulic fracturing projects.
Q: Can you customize fracturing units for high-pressure and high-volume operations?
A: Yes. We customize fracturing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need diesel, electric, or hybrid configurations, send your site conditions and we will return a tailored frac unit configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has over 30 years of experience manufacturing fracturing equipment for oilfield stimulation. Our fracturing trucks, blenders, and sand handling units have been deployed in shale gas and tight oil operations across North America, the Middle East, and Central Asia. All units are API-certified and available with diesel, electric, or hybrid drive options to match your field conditions and emission requirements.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.