Fracturing Fluid Continuous Mixing Truck
Continuous mixing truck, on-site automatic fluid preparation, no pre-mixing pond required. This heavy-duty fracturing unit (high-pressure working capacity) is designed for professional oilfield service companies who need reliable, field-proven fracturing equipment that performs consistently under continuous hydraulic fracturing duty.
SJ Petroleum Machinery manufactures this high-pressure fracturing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Drive: Diesel mechanical
The diesel engine and drivetrain are rated for continuous fracturing pump duty. Critical components (Cummins engine, control system) are sourced from reputable manufacturers with global service support.
Capacity: 60 m3/hr
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, engine controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This continuous fracturing fluid mixing truck for sale is ideal for:
- Large fracturing operations: Continuous mixing eliminates batch mixing delays for high-volume fracturing programs
- Continuous fluid delivery: Ensures uninterrupted friction water and gel fluid supply for multi-stage fracturing
- Reduced mixing pond footprint: Eliminates large open mixing ponds, reducing site footprint and environmental impact
- Consistent fluid quality: Automated mixing ensures consistent fluid properties throughout the job
Continuous mixing truck vs batch mixing — do you still need a pre-mix pond?
The Fracturing Fluid Continuous Mixing Truck prepares frac fluid on-site at 60 m³/hr automatically, eliminating the pre-mixing pond that conventional operations build before a frac job. Instead of trucking pre-mixed gel or building a lined pond, this truck meters water, gelling agent, and additives continuously and delivers ready-to-pump fluid to the blender.
Choose the continuous mixing truck when:
- Water supply and logistics are tight. Building a pre-mix pond requires water, space, and lining; pre-mixed fluid has a limited shelf life. Continuous mixing uses water as it arrives — you pump from tankers or a water source directly. This matters where water must be trucked in and storage space is limited.
- You want just-in-time fluid preparation. Fluid is mixed when the pumps need it, not hours before. If the job pauses or the schedule changes, you have not wasted a pond of mixed fluid that cannot be stored.
- Your program uses many fluid recipes. Different stages may need different gel loadings or additive packages. A continuous mixer switches recipes between stages by adjusting the metering system — a pond is one recipe for the whole job.
- You are standardizing on truck-mounted equipment. The 60 m³/hr unit is road-legal and moves with the fleet. If your logistics are truck-based (not skid/permanent), this fits the pattern.
Continuous mixing truck vs batch pond mixing — the real comparison
- Batch pond: Cheaper equipment (a lined pit), but needs water storage, has shelf-life limits, ties up water, and cannot change recipes mid-job. Best for one-off jobs with ample space and water.
- Continuous mixing (this truck): Higher equipment cost, but no pond, just-in-time fluid, recipe flexibility, and less water tied up on location. Best for multi-stage programs, tight logistics, and varied recipes.
Operating sequence
The hydraulic fracturing operation follows these key steps:
- Site setup: Frac unit positioned at wellhead, high-pressure iron connected to manifold and wellhead
- Pre-job checks: Operator verifies pump condition, pressure safety valves, and data acquisition system calibration
- Slurry preparation: Sand blender mixes proppant with fracturing fluid at controlled concentration
- Pumping stage: Frac pump delivers high-pressure slurry at controlled rate, operator monitors pressure and proppant concentration
- Stage completion: After each stage, well is flushed and pressure is monitored before next stage
Common selections
- Electric drive conversion: customized configuration tailored to your field conditions
- cold weather package: customized configuration tailored to your field conditions
- automatic chemical dosing system.: customized configuration tailored to your field conditions
- Automated control system: PLC-based control with touchscreen HMI
- Data acquisition and recording: real-time monitoring and data logging
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete fracturing spread for shale gas stimulation?
A: Yes. We can supply complete fracturing spreads for shale gas and tight oil stimulation: frac pumps, sand blenders, manifolds, and data vans as a package, engineered to work together for onshore oilfield hydraulic fracturing projects.
Q: Can you customize fracturing units for high-pressure and high-volume operations?
A: Yes. We customize fracturing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need diesel, electric, or hybrid configurations, send your site conditions and we will return a tailored frac unit configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has over 30 years of experience manufacturing fracturing equipment for oilfield stimulation. Our fracturing trucks, blenders, and sand handling units have been deployed in shale gas and tight oil operations across North America, the Middle East, and Central Asia. All units are API-certified and available with diesel, electric, or hybrid drive options to match your field conditions and emission requirements.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.