Fracturing Manifolds Truck
Fracturing manifolds truck, collects discharge from multiple pumps and distributes to wellhead. This heavy-duty fracturing unit (105 MPa working pressure) is designed for professional oilfield service companies who need reliable, field-proven fracturing equipment that performs consistently under continuous hydraulic fracturing duty.
SJ Petroleum Machinery manufactures this 105 MPa fracturing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Function: Fluid distribution
The diesel engine and drivetrain are rated for continuous fracturing pump duty. Critical components (Cummins engine, control system) are sourced from reputable manufacturers with global service support.
Working pressure: 105 MPa
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, engine controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This fracturing manifolds truck for sale is ideal for:
- Multiple pump parallel operations: Manifold system distributes high-pressure fluid from multiple frac pumps to the wellhead
- Cluster well pads: Truck-mounted manifold easily relocates between wells on multi-well pad operations
- High-pressure fracturing networks: Designed for 105 MPa (15,000 psi) pressure ratings for modern fracturing operations
- Safe high-pressure operations: Manifold system with valve control for safe routing of high-pressure fluid
Do you need a dedicated manifolds truck, or are hammer unions enough?
The Fracturing Manifolds Truck collects discharge from multiple frac pumps and distributes it to the wellhead at 105 MPa working pressure — the central plumbing of a frac spread. On small jobs, crews connect pumps to the wellhead with individual high-pressure hoses and hammer unions. On multi-pump spreads, a manifold consolidates that plumbing: fewer connections, fewer leak points, and a built-in crane to handle the heavy iron.
Choose a manifolds truck when:
- You run 4+ pumps per stage. With 4–6 pumps, individual hoses to the wellhead become a spaghetti of connections, each a potential leak point at 105 MPa. One manifold collects all pump discharge and distributes through a single, organized header — fewer joints, faster rig-up, safer operation.
- You want fewer high-pressure connections on location. Every hammer union is a fatigue point at 15,000 psi. Consolidating through a manifold cuts the number of live connections dramatically, reducing both leak risk and rig-up time.
- You need an onboard crane for iron handling. The truck carries the manifold sections plus a crane to position them. Without it, you need a separate crane on location just for high-pressure iron — an extra piece of equipment and crew.
- Your spread is standardized (pumps, blender, manifold as a package). A designed manifold matches your pump count and wellhead configuration. If your fleet is ad-hoc (different pump brands, varying pump counts), a flexible hose-and-hammer layout may be simpler than a fixed manifold.
Manifold truck vs individual hoses — when is the manifold worth it?
- Individual hoses: Lowest equipment cost, maximum flexibility in layout. Acceptable for 1–3 pump jobs or one-off operations. But more connections, slower rig-up, higher leak risk at pressure.
- Manifolds truck (this unit): Higher upfront cost, but fewer connections, faster rig-up, onboard crane, and a clean 105 MPa distribution path. Pays off from the first 4-pump stage and compounds on every stage after.
Operating sequence
The hydraulic fracturing operation follows these key steps:
- Site setup: Frac unit positioned at wellhead, high-pressure iron connected to manifold and wellhead
- Pre-job checks: Operator verifies pump condition, pressure safety valves, and data acquisition system calibration
- Slurry preparation: Sand blender mixes proppant with fracturing fluid at controlled concentration
- Pumping stage: Frac pump delivers high-pressure slurry at controlled rate, operator monitors pressure and proppant concentration
- Stage completion: After each stage, well is flushed and pressure is monitored before next stage
Common selections
- 140 MPa ultra-high-pressure manifold: customized configuration tailored to your field conditions
- remote control valves.: customized configuration tailored to your field conditions
- Automated control system: PLC-based control with touchscreen HMI
- Data acquisition and recording: real-time monitoring and data logging
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete fracturing spread for shale gas stimulation?
A: Yes. We can supply complete fracturing spreads for shale gas and tight oil stimulation: frac pumps, sand blenders, manifolds, and data vans as a package, engineered to work together for onshore oilfield hydraulic fracturing projects.
Q: Can you customize fracturing units for high-pressure and high-volume operations?
A: Yes. We customize fracturing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need diesel, electric, or hybrid configurations, send your site conditions and we will return a tailored frac unit configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has over 30 years of experience manufacturing fracturing equipment for oilfield stimulation. Our fracturing trucks, blenders, and sand handling units have been deployed in shale gas and tight oil operations across North America, the Middle East, and Central Asia. All units are API-certified and available with diesel, electric, or hybrid drive options to match your field conditions and emission requirements.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.