Choke Manifold | Kill Manifold | Well Control | API 16C

Choke & Kill Manifold Equipment

Choke and kill manifolds are the surface well control equipment that connects the BOP stack to the circulating and disposal systems. The choke manifold controls flow and pressure during well control operations (circulating out a kick). The kill manifold allows heavy mud to be pumped into the well to kill it. Together, they are critical components of the well control system. We supply API 16C certified choke and kill manifolds in various configurations and pressure ratings for your drilling and workover operations.

Choke and kill manifold well control equipment

How Choke & Kill Manifolds Work

Understanding the well control manifold system:

Choke Manifold (Flow Control)

The choke manifold connects to the BOP via the choke line. It controls flow rate and pressure during well control operations. Adjustable chokes allow precise pressure control. The choke manifold routes flow to the mud/gas separator and flare system during a kick. It's the "outflow" side of well control.

Kill Manifold (Injection)

The kill manifold connects to the BOP via the kill line. It allows heavy weighted mud to be pumped into the well to kill the influx. Kill lines are typically larger diameter for high-rate pumping. The kill manifold is the "inflow" side of well control —pumping kill mud into the well.

Adjustable Chokes

Adjustable chokes (hydraulically or manually operated) allow precise flow control. Used during well control operations to maintain bottomhole pressure. The choke opening is adjusted based on well pressure readings. Critical for safely circulating out a kick.

Positive Chokes

Positive (fixed) chokes have a fixed bore size. Used as a back-up or for fixed-rate flow. Multiple positive chokes of different sizes are typically included on a manifold. Provides a reliable flow path when adjustable chokes are unavailable.

Our Choke & Kill Manifold Range

API 16C certified configurations:

Configuration Description Pressure Rating
Single Choke ManifoldOne adjustable choke + one positive choke. Basic configuration.3,000–5,000 psi
Dual Choke ManifoldTwo adjustable chokes + multiple positive chokes. Redundant design.5,000–10,000 psi
Triple Choke ManifoldThree adjustable chokes + multiple positives. Maximum redundancy.10,000–15,000 psi
Kill ManifoldHigh-rate injection manifold for pumping kill mud. Larger lines.5,000–15,000 psi
Combined Choke & Kill SkidIntegrated choke + kill manifold on one skid. Compact design.5,000–10,000 psi

Key Features

What makes our manifolds reliable:

API 16C Certified

All our manifolds are designed, manufactured, and tested to API 16C standards. Full certification documentation provided. Third-party inspected. Built to the industry standard for well control fluid control equipment.

Wear-Resistant Choke Trim

Our chokes use tungsten carbide or ceramic trim for long service life. Produced fluids (with sand, proppant) are abrasive. Wear-resistant trim extends choke service life. Reduces maintenance and downtime.

Hydraulic Operation

Adjustable chokes can be hydraulically operated for remote control. The driller can adjust the choke from the doghouse. This improves safety during well control operations —personnel don't need to be near the high-pressure lines.

Skid-Mounted Design

All our manifolds are skid-mounted for easy transportation and installation. Compact footprint. Lifting points for crane handling. Connections pre-piped. Ready to connect when it arrives on location.

Applications

Where our manifolds are used:

Drilling Operations

Standard choke and kill manifolds on drilling rigs. For well control during drilling. Every drilling rig must have well control manifolds. Our manifolds meet drilling rig requirements worldwide.

Workover Operations

Choke and kill manifolds for workover rigs. Well control during well servicing operations. Similar requirements to drilling, typically lower pressure ratings for shallow workover operations.

Fracturing Flowback

Choke manifolds for fracturing flowback operations. Controlling flowback rate and pressure after fracturing. High-pressure, abrasive service. Wear-resistant choke trim is essential.

Testing Operations

Choke manifolds for well testing operations. Controlling flow rate during well testing (DST, production testing). Precise flow control is needed for accurate well test data.

Frequently Asked Questions

What's the difference between a choke manifold and a kill manifold?

The choke manifold controls outflow during well control operations —it routes flow from the well (via the choke line) to the mud/gas separator and flare. It has adjustable chokes for pressure control. The kill manifold is for inflow —it allows heavy kill mud to be pumped into the well (via the kill line) to kill the influx. The choke manifold is the "out" side; the kill manifold is the "in" side. Both are needed for complete well control. We supply both, or combined choke & kill manifolds on one skid.

What pressure rating do I need?

The manifold pressure rating must match the BOP stack rating (they're connected by the choke/kill lines). If you have a 5,000 psi BOP, you need a 5,000 psi manifold. If you have a 10,000 psi BOP, you need a 10,000 psi manifold. The manifold rating must equal or exceed the BOP rating. Tell us your BOP rating, and we will match the manifold rating.

How often do chokes need maintenance?

It depends on the service. In abrasive service (with sand or proppant), choke trim can wear in weeks or months. In clean service, choke trim lasts much longer. We recommend inspecting chokes regularly and keeping spare trim kits on hand. Our chokes use wear-resistant tungsten carbide or ceramic trim for extended life. Tell us your operating conditions, and we will advise on maintenance intervals.

Do you supply spare parts for choke manifolds?

Yes. We supply spare parts for our manifolds: choke trim kits, valve packing, gaskets, seals, pressure gauges, control panel parts. We recommend keeping critical spare parts (choke trim kits, packing sets) on site to minimize downtime. Spare parts are available from inventory or manufactured to order. Tell us what parts you need, and we will quote.

Can you custom-design a manifold configuration?

Yes. We can custom-design manifold configurations to your specific requirements: custom pressure ratings, number of chokes, valve types, control options, skid layout. Our engineering team works with you to design the right configuration. Custom builds typically take 8–16 weeks. Tell us your requirements, and we will quote a custom solution.

Need Choke & Kill Manifold Equipment?

Tell us about your project: pressure rating, manifold configuration, and quantity. Our engineering team will design and supply the right API 16C certified equipment.