SYL2300Q-105Q Fracturing Pump Skid
2300 hp quintuplex fracturing pump skid, 105 MPa high-pressure, conventional diesel drive, designed for mid-deep well volume fracturing. This 2300 hp fracturing unit (105 MPa working pressure) is designed for professional oilfield service companies who need reliable, field-proven fracturing equipment that performs consistently under continuous hydraulic fracturing duty.
SJ Petroleum Machinery manufactures this 105 MPa fracturing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Power: 2300 hp diesel
The 2300 hp diesel engine and drivetrain are rated for continuous fracturing pump duty. Critical components (Cummins engine, control system) are sourced from reputable manufacturers with global service support.
Working pressure: 105 MPa (15,000 psi)
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, engine controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This 2300 hp, 105 MPa fracturing pump skid for sale is ideal for:
- Mid-deep well volume fracturing (3000-5000m): Balanced power and pressure for the majority of shale gas development wells
- Shale gas fracturing operations: Proven performance for horizontal well multi-stage fracturing
- High-pressure gas well stimulation: 105 MPa rating handles high-pressure reservoir stimulation jobs
- Cluster well pad operations: Skid-mounted design for multi-well fracturing campaigns on a single pad
Is the SYL2300Q-105Q the workhorse your frac spread needs?
The SYL2300Q-105Q is a 2,300 hp, 105 MPa (15,000 psi) diesel-driven frac pump skid — the industry-standard workhorse for multi-stage fracturing. It is the pump you build a frac spread around: 4–6 of these units, plus a blender and manifolds, make up a typical shale-gas or tight-oil fracturing fleet. The 105 MPa rating covers modern high-pressure completion designs.
Choose this pump skid when:
- You are running multi-stage frac campaigns (10+ stages per well). This is the pump class designed for it. Small pumps cannot sustain the continuous pumping hours and cumulative proppant volumes of multi-stage completions.
- Treating pressure can reach 105 MPa. Deep tight gas, shale, and high-stress reservoirs need 15,000 psi-class pumps. If your design stays below 70 MPa, a smaller pump saves money — but most modern unconventional wells need the 105 MPa class.
- You want global-service components. The Cummins engine and standard control system mean spare parts and service technicians are available worldwide, not locked to one factory. For operators in remote basins, this shortens downtime when something fails.
- Field maintenance speed matters. Modular valve seats and quick-change components let a trained crew service the fluid end in hours, not days — critical when the frac spread is on standby and every hour of downtime costs the operator day-rate.
SYL2300Q-105Q vs smaller (SYL600-70) vs electric (SYL8000DQ) — where does it fit?
- SYL600-70: Small jobs, mini-frac, acidizing. Cannot sustain multi-stage campaigns.
- SYL2300Q-105Q (this pump): The diesel workhorse for standard frac spreads. Highest flexibility — no grid power needed, proven worldwide.
- SYL8000DQ (electric): 8,000 hp equivalent electric pump for large fleets with grid power, lower fuel cost, and lower emissions. Higher upfront cost, needs power infrastructure.
Operating sequence
The hydraulic fracturing operation follows these key steps:
- Site setup: Frac unit positioned at wellhead, high-pressure iron connected to manifold and wellhead
- Pre-job checks: Operator verifies pump condition, pressure safety valves, and data acquisition system calibration
- Slurry preparation: Sand blender mixes proppant with fracturing fluid at controlled concentration
- Pumping stage: Frac pump delivers high-pressure slurry at controlled rate, operator monitors pressure and proppant concentration
- Stage completion: After each stage, well is flushed and pressure is monitored before next stage
Common selections
- Electric drive conversion: customized configuration tailored to your field conditions
- higher pressure 140 MPa: customized configuration tailored to your field conditions
- cold weather package: customized configuration tailored to your field conditions
- desert package.: customized configuration tailored to your field conditions
- Automated control system: PLC-based control with touchscreen HMI
- Data acquisition and recording: real-time monitoring and data logging
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete fracturing spread for shale gas stimulation?
A: Yes. We can supply complete fracturing spreads for shale gas and tight oil stimulation: frac pumps, sand blenders, manifolds, and data vans as a package, engineered to work together for onshore oilfield hydraulic fracturing projects.
Q: Can you customize fracturing units for high-pressure and high-volume operations?
A: Yes. We customize fracturing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need diesel, electric, or hybrid configurations, send your site conditions and we will return a tailored frac unit configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has over 30 years of experience manufacturing fracturing equipment for oilfield stimulation. Our fracturing trucks, blenders, and sand handling units have been deployed in shale gas and tight oil operations across North America, the Middle East, and Central Asia. All units are API-certified and available with diesel, electric, or hybrid drive options to match your field conditions and emission requirements.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.