Offshore Platform | Fixed Installation | Permanent Frac

Skid Mounted Fracturing Unit: Stationary High-Pressure Pumping

A skid mounted fracturing unit combines a high pressure fracturing pump with its drive unit on a common skid frame. It is designed for permanent or semi-permanent installation on offshore platforms, FPSOs, or fixed well sites that need dedicated fracturing capability. It doesn't drive between locations.

Skid mounted fracturing unit

When to Choose a Skid Mounted Frac Unit

Skid mounted fracturing units are the right choice when:

  • The unit will be permanently installed on an offshore platform or FPSO
  • You have a fixed well site that needs dedicated fracturing capability
  • Space constraints prevent using a truck mounted fracturing unit
  • The unit will run continuously in one location for extended periods
  • You need electric drive (grid power or platform power) instead of diesel

If you need to move between well sites frequently for conventional fracturing, a truck mounted fracturing fleet is standard. Skid units are for stationary operations where mobility isn't needed.

Advantages of Skid Mounted Frac Design

Space Efficiency

Without a truck chassis taking up space, the skid unit fits into tighter spots. This is critical on offshore platforms where deck space is premium. You can pack more pumping capacity into a smaller footprint.

Electric Drive Ready

Skid units are easier to configure with electric motor drive. On offshore platforms, platform power is available —electric drive is quieter, cleaner and more efficient than diesel. The skid layout makes it straightforward to integrate VFD controls.

Better Stability

The skid sits flat on the deck. No truck suspension flexing during operation. This improves pumping stability and reduces vibration-related component wear. For high-pressure, high-flow operations, stability matters.

Modular Transport

Skid units can be split into modules for transport by crane or supply boat. Each module is sized to fit platform hatches and crane lifting capacity. On-site assembly uses bolted connections and flexible hoses.

Typical Specifications

Parameter Typical Range
Pump type Quintuplex plunger pump
Working pressure 70 - 105 MPa (10,000 - 15,000 psi)
Flow rate 1500 - 2500 L/min (400 - 660 gpm)
Drive type Diesel engine or electric motor with VFD
Engine/motor power 1000 - 2500 HP
Skid weight 15 - 30 tons (depends on configuration)

Frequently Asked Questions

How many skid units do I need for a full frac spread?

A typical onshore frac spread uses 6-12 pump trucks. For a skid-mounted permanent installation, you'd need the same number of skid units arranged in a battery. The exact number depends on your target total flow rate. For a typical shale frac, you need about 10,000-15,000 L/min total flow —that's 6-10 skid units at 1500-2000 L/min each. We can help you size the battery based on your well design and target pumping rate.

Can I use a skid frac unit on land?

Yes. Skid frac units are used on land where there's a fixed well site with available power. They're common at central processing facilities, gas plants, or well pads that need dedicated fracturing capability. The trade-off is that they can't be moved between locations quickly. If you need mobile fracturing, truck mounted units are standard.

What is the difference between a skid frac unit and a trailer frac unit?

A skid unit sits on a fixed skid base. A trailer unit is mounted on a wheeled trailer that can be towed. Skid units are for permanent installation; trailer units are semi-mobile. Trailer units can be moved between sites but are slower to set up than truck mounted units. For offshore or fixed installation, skid is standard. For occasional moves, trailer works. For daily moves between wells, truck mounted is best.

Need a Skid Mounted Fracturing Unit?

Tell us your required pressure, flow rate and drive preference. Our engineering team will recommend the right skid configuration and provide a quote within 48 hours.