Most Economical | Permanent Installation | Simple Design

Skid-Mounted Pump Unit: The Most Economical Installation Option

If your pump unit is going to stay in one place —at a production facility, on a platform, in a battery of tanks, or at a well site that won't move for years —there's no reason to pay for a truck chassis or trailer. A skid-mounted pump unit is the simplest, most economical configuration: the pump, engine or motor, controls, and base frame are all mounted on a single steel skid. You crane it onto a concrete foundation, bolt it down, connect the piping and power, and it's running. No rolling chassis, no axles, no suspension —just the pump unit on a steel frame. We manufacture skid-mounted pump units for permanent or semi-permanent installation, at the lowest cost per unit of pumping capacity.

Skid-mounted pump unit on steel base frame

Skid vs Trailer vs Truck: Which Mounting?

Factor Skid-Mounted Trailer-Mounted Truck-Mounted
Relative Cost Lowest (100%) Medium (~130%) Highest (~180%)
Mobility Needs crane to move Can be towed by truck Self-propelled
Setup Time Longer (bolt to foundation) Quick (park and connect) Quickest (drive up and connect)
Best For Permanent installation, fixed location Semi-mobile, occasional moves Mobile service, frequent moves

Skid-Mounted Pump Unit Features

Integrated Steel Skid Base

All components (pump, engine/motor, gearbox, controls) are mounted on a single structural steel skid. The skid has lifting eyes for crane handling and bolt-down feet for permanent installation. Everything aligns and pre-tested at the factory.

Factory-Aligned & Tested

The complete skid package is assembled, aligned, and tested at our factory. When it arrives at your site, you don't need to realign the pump and engine —it's already done. Just bolt it down, connect piping, and start.

Open Design for Maintenance

Without a truck chassis or trailer obscuring the bottom, all components are easily accessible from all sides. Maintenance and repair are simpler. No crawling under a truck chassis to reach the pump.

Flexible Configurations

Skid-mounted units can be diesel-driven, electric-driven, or combined. The skid can be designed for indoor installation, outdoor installation, or offshore deck mounting. We size the skid to your equipment and site constraints.

Frequently Asked Questions

How do I move a skid-mounted pump unit if I need to relocate it later?

Skid-mounted units are moved by crane. The skid has lifting eyes built in. You crane it onto a truck or flatbed trailer, transport it to the new location, and crane it off onto the new foundation. This is fine for occasional moves (once every few years). If you need to move the unit frequently (every week or month), a trailer or truck-mounted unit would be more practical.

What kind of foundation does a skid-mounted pump need?

Typically a concrete foundation sized for the pump unit's weight and dynamic loads. We provide foundation load data and anchor bolt positions in our installation drawings. For small pump units, a simple concrete pad is sufficient. For large high-pressure units, a reinforced concrete foundation designed for vibration is needed. Tell us your pump model, and we'll provide foundation specifications.

Can you provide the skid with a canopy or enclosure for outdoor use?

Yes. We can provide weather canopies or full enclosures for outdoor-mounted skid units. This protects the engine, motor, and controls from rain, snow, and direct sun. For extreme climates, we can provide insulated enclosures with heating or ventilation. Tell us your environmental conditions, and we'll specify the right protection level.

Need an Economical Pump Unit for Fixed Installation?

Tell us your pumping requirements and site conditions. We'll design and build a skid-mounted pump unit —the most economical configuration for permanent or semi-permanent installation —pre-aligned, tested, and ready to bolt down.