All-Electric Continuous Mixing Skid
All-electric continuous mixing skid, 80 m3/hr high-capacity, paired with electric fracturing skid units. This electric-drive fracturing unit (high-pressure working capacity) is designed for professional oilfield service companies who need reliable, field-proven fracturing equipment that performs consistently under continuous hydraulic fracturing duty.
SJ Petroleum Machinery manufactures this high-pressure fracturing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Drive: All-electric VFD
The electric motor and VFD drivetrain are rated for continuous fracturing pump duty. Critical components (electric motor, control system) are sourced from reputable manufacturers with global service support.
Capacity: 80 m3/hr
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, motor controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This all-electric continuous mixing skid for sale is ideal for:
- Large shale gas fields: Electric-driven continuous mixing for large-scale shale gas development programs
- All-electric fracturing operations: Pairs with electric frac pumps and electric blenders for complete electric spreads
- On-site automatic fluid preparation: Automated mixing system prepares friction water and gel fluids on demand
- Environmental compliance: Zero emissions and reduced noise for HSE-sensitive well locations
All-electric mixing skid — the 80 m³/hr partner for electric frac fleets
The Full Electric Drive Fracturing Continuous Mixing Skid is the electric, skid-mounted version of the continuous mixing truck: 80 m³/hr capacity, all-electric VFD drive, designed to pair with electric frac pump skids. The 80 m³/hr rate is 33% higher than the diesel truck's 60 m³/hr — matched to the higher sustained rates of electric pump fleets, which do not derate over long stages.
Choose this electric mixing skid when:
- Your frac fleet is all-electric. Electric pumps plus an electric mixer means no diesel engines on the fluid side at all — one power source, no fuel trucks, no exhaust, simpler maintenance across the spread.
- Stage rates exceed 60 m³/hr of fluid demand. If your pump fleet draws more fluid than the diesel mixer can produce, blending becomes the bottleneck. The 80 m³/hr rating keeps fluid ahead of the pumps on high-rate stages.
- You want continuous mixing without a pond at electric-pad scale. Like the diesel truck, it eliminates the pre-mix pond — but at higher capacity and with electric efficiency for large multi-stage campaigns.
- Your pad has VFD supply power. The skid needs grid or generator power. On electric pads this already exists; on fully remote diesel pads, the diesel truck version is the practical choice.
Electric 80 m³/hr skid vs diesel 60 m³/hr truck — which mixer for your spread?
- Diesel truck (60 m³/hr): Self-contained, works anywhere, truck mobility. Choose for remote pads, mixed fleets, or lower-rate stages.
- Electric skid (this unit): Higher capacity, needs supply power, skid footprint. Choose for all-electric fleets and high-rate multi-stage campaigns where 80 m³/hr removes the fluid bottleneck.
Operating sequence
The hydraulic fracturing operation follows these key steps:
- Site setup: Frac unit positioned at wellhead, high-pressure iron connected to manifold and wellhead
- Pre-job checks: Operator verifies pump condition, pressure safety valves, and data acquisition system calibration
- Slurry preparation: Sand blender mixes proppant with fracturing fluid at controlled concentration
- Pumping stage: Frac pump delivers high-pressure slurry at controlled rate, operator monitors pressure and proppant concentration
- Stage completion: After each stage, well is flushed and pressure is monitored before next stage
Common selections
- Gas generator grid connection: connect to site gas generator for reduced fuel cost
- Direct grid power option: electric drive from local power grid for zero-emission operation
- Remote monitoring system: real-time data transmission to cloud platform
- Unmanned operation capability: automated control for reduced on-site crew
- Data logging and reporting: comprehensive operation data recording
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete fracturing spread for shale gas stimulation?
A: Yes. We can supply complete fracturing spreads for shale gas and tight oil stimulation: frac pumps, sand blenders, manifolds, and data vans as a package, engineered to work together for onshore oilfield hydraulic fracturing projects.
Q: Can you customize fracturing units for high-pressure and high-volume operations?
A: Yes. We customize fracturing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need diesel, electric, or hybrid configurations, send your site conditions and we will return a tailored frac unit configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has over 30 years of experience manufacturing fracturing equipment for oilfield stimulation. Our fracturing trucks, blenders, and sand handling units have been deployed in shale gas and tight oil operations across North America, the Middle East, and Central Asia. All units are API-certified and available with diesel, electric, or hybrid drive options to match your field conditions and emission requirements.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.