Automated Continuous Sand Conveying Unit
Automated continuous sand conveying unit, replaces sand trucks with direct delivery to blender. This heavy-duty fracturing unit (high-pressure working capacity) is designed for professional oilfield service companies who need reliable, field-proven fracturing equipment that performs consistently under continuous hydraulic fracturing duty.
SJ Petroleum Machinery manufactures this high-pressure fracturing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Drive: Electric
The diesel engine and drivetrain are rated for continuous fracturing pump duty. Critical components (Cummins engine, control system) are sourced from reputable manufacturers with global service support.
Capacity: 100 t/hr
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, engine controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This automated continuous sand conveying system for sale is ideal for:
- Large fracturing operations: Automated sand delivery reduces labor requirements for high-volume fracturing programs
- Reduced sand truck count: Continuous conveying eliminates the need for frequent sand truck deliveries on location
- Continuous sand supply: Ensures uninterrupted proppant delivery for multi-stage fracturing operations
- Efficient pad operations: Streamlined sand handling reduces footprint and improves safety on well pads
Automated sand conveying — replacing sand trucks with a continuous feed line
The Automated Continuous Sand Conveying Unit (100 t/hr, electric drive) delivers proppant directly from the sand storage to the blender, replacing the traditional cycle of sand trucks backing up, dumping, and a loader feeding the blender's hopper. It automates the sand supply chain that is otherwise the most labor- and equipment-intensive part of a frac operation.
Choose an automated conveying unit when:
- Your stages consume sand faster than trucks can feed it. At high proppant rates, a standard setup needs multiple sand trucks cycling constantly and a loader operator on the hopper. The continuous conveyor keeps sand flowing at 100 t/hr — feeding even the largest electric frac stages without a break.
- You want to cut crew and equipment on the sand side. Automated conveying removes loader operators and hopper watchers from the pad, and reduces the number of sand trucks needed. In high-labor-cost regions or when skilled operators are scarce, this is a direct saving.
- Pad space is at a premium. A conveyor system is compact and pre-engineered, versus the traffic flow of multiple sand trucks and a loader maneuvering around the blender. On tight pads, the conveyor frees real estate.
- Your sand supply is centralized (silos or bulk trailers). The unit works best when sand is stored centrally and conveyed continuously. If your sand arrives in sacks or by scattered truckloads, the older loader-fed method may be simpler.
Automated conveying vs loader-fed sand handling — which for your operation?
- Loader-fed (sand trucks + skid steer): Lowest equipment cost, maximum flexibility, works with any sand supply. Best for small jobs or low-rate stages where truck cycling keeps up.
- Automated conveying (this unit): Higher upfront cost, but continuous 100 t/hr feed, fewer crew on the sand side, compact footprint. Pays off on high-rate multi-stage programs and in high-labor-cost operations.
Operating sequence
The hydraulic fracturing operation follows these key steps:
- Site setup: Frac unit positioned at wellhead, high-pressure iron connected to manifold and wellhead
- Pre-job checks: Operator verifies pump condition, pressure safety valves, and data acquisition system calibration
- Slurry preparation: Sand blender mixes proppant with fracturing fluid at controlled concentration
- Pumping stage: Frac pump delivers high-pressure slurry at controlled rate, operator monitors pressure and proppant concentration
- Stage completion: After each stage, well is flushed and pressure is monitored before next stage
Common selections
- Higher capacity 200 t/hr: customized configuration tailored to your field conditions
- cold weather package.: customized configuration tailored to your field conditions
- Automated control system: PLC-based control with touchscreen HMI
- Data acquisition and recording: real-time monitoring and data logging
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete fracturing spread for shale gas stimulation?
A: Yes. We can supply complete fracturing spreads for shale gas and tight oil stimulation: frac pumps, sand blenders, manifolds, and data vans as a package, engineered to work together for onshore oilfield hydraulic fracturing projects.
Q: Can you customize fracturing units for high-pressure and high-volume operations?
A: Yes. We customize fracturing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need diesel, electric, or hybrid configurations, send your site conditions and we will return a tailored frac unit configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has over 30 years of experience manufacturing fracturing equipment for oilfield stimulation. Our fracturing trucks, blenders, and sand handling units have been deployed in shale gas and tight oil operations across North America, the Middle East, and Central Asia. All units are API-certified and available with diesel, electric, or hybrid drive options to match your field conditions and emission requirements.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.