SHS32 Fully Electric Sand Blending Skid
32 bbl fully electric sand blending skid, high-capacity, paired with electric fracturing skid units. This electric-drive fracturing unit (high-pressure working capacity) is designed for professional oilfield service companies who need reliable, field-proven fracturing equipment that performs consistently under continuous hydraulic fracturing duty.
SJ Petroleum Machinery manufactures this high-pressure fracturing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Drive: All-electric VFD
The electric motor and VFD drivetrain are rated for continuous fracturing pump duty. Critical components (electric motor, control system) are sourced from reputable manufacturers with global service support.
Capacity: 32 bbl/blend
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, motor controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This fully electric sand blending skid for sale is ideal for:
- Large shale gas fields: Electric drive for efficient, high-capacity proppant blending in large-scale operations
- All-electric fracturing operations: Matches electric frac pumps for complete electric fracturing spreads
- Continuous mixing operations: Designed for 24/7 operation in multi-well pad fracturing campaigns
- Environmental compliance: Zero emissions and reduced noise for HSE-sensitive locations
SHS32 all-electric blender — built to match your electric frac skids
The SHS32 is a 32 bbl all-electric (VFD) sand blending skid, designed to pair with electric frac pump skids (SCF/SYL electric range). The 32 bbl capacity is 60% larger than the 20 bbl diesel blenders — sized for the higher sustained rates of electric fleets, which can hold full load for entire stages without diesel heat derating.
Choose this all-electric blender when:
- Your frac spread is all-electric (electric pumps, electric blender). Mixing an electric pump fleet with a diesel blender works, but you keep diesel fuel, maintenance, and exhaust on the pad. An all-electric spread eliminates the last diesel unit and simplifies power distribution — one electrical philosophy for the whole fleet.
- Stage designs demand higher blend rates than 20 bbl units sustain. At 32 bbl capacity, the SHS32 keeps up with multi-pump electric stages that pump more fluid per minute than a single diesel pump pair. If your stage rate is limited by blender output, this unit removes that constraint.
- You have VFD power available on the pad. Like all electric frac equipment, the SHS32 needs supply power (grid or generator). On pads where you already run electric pumps, the power infrastructure exists.
- You want the skid footprint for pad layouts. The skid format is crane-lifted into place and stays for the campaign — consistent with electric pump skids that also sit semi-permanently.
SHS32 electric vs SHS20 diesel — what does electrification actually change?
- SHS20 diesel: 20 bbl, self-contained fuel and engine, works on any pad without power. Right for remote or mixed fleets.
- SHS32 electric (this unit): 32 bbl, needs supply power, but higher capacity, lower energy cost per barrel, no on-site exhaust, and consistent output at full load for entire stages. The right match for electric frac fleets.
Operating sequence
The hydraulic fracturing operation follows these key steps:
- Site setup: Frac unit positioned at wellhead, high-pressure iron connected to manifold and wellhead
- Pre-job checks: Operator verifies pump condition, pressure safety valves, and data acquisition system calibration
- Slurry preparation: Sand blender mixes proppant with fracturing fluid at controlled concentration
- Pumping stage: Frac pump delivers high-pressure slurry at controlled rate, operator monitors pressure and proppant concentration
- Stage completion: After each stage, well is flushed and pressure is monitored before next stage
Common selections
- Gas generator grid connection: connect to site gas generator for reduced fuel cost
- Direct grid power option: electric drive from local power grid for zero-emission operation
- Remote monitoring system: real-time data transmission to cloud platform
- Unmanned operation capability: automated control for reduced on-site crew
- Data logging and reporting: comprehensive operation data recording
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete fracturing spread for shale gas stimulation?
A: Yes. We can supply complete fracturing spreads for shale gas and tight oil stimulation: frac pumps, sand blenders, manifolds, and data vans as a package, engineered to work together for onshore oilfield hydraulic fracturing projects.
Q: Can you customize fracturing units for high-pressure and high-volume operations?
A: Yes. We customize fracturing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need diesel, electric, or hybrid configurations, send your site conditions and we will return a tailored frac unit configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has over 30 years of experience manufacturing fracturing equipment for oilfield stimulation. Our fracturing trucks, blenders, and sand handling units have been deployed in shale gas and tight oil operations across North America, the Middle East, and Central Asia. All units are API-certified and available with diesel, electric, or hybrid drive options to match your field conditions and emission requirements.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.