SYL3000-140Q Fracturing Pump
3000 hp ultra-high-pressure fracturing pump, 140 MPa (20,000 psi), designed for ultra-deep wells and high-pressure gas wells. This 3000 hp fracturing unit (140 MPa working pressure) is designed for professional oilfield service companies who need reliable, field-proven fracturing equipment that performs consistently under continuous hydraulic fracturing duty.
SJ Petroleum Machinery manufactures this 140 MPa fracturing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Power: 3000 hp diesel
The 3000 hp diesel engine and drivetrain are rated for continuous fracturing pump duty. Critical components (Cummins engine, control system) are sourced from reputable manufacturers with global service support.
Working pressure: 140 MPa (20,000 psi)
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, engine controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This 3000 hp, 140 MPa ultra-high-pressure fracturing pump is specifically designed for:
- Ultra-deep wells (5000-7000m): 140 MPa working pressure handles the deepest onshore fracturing operations
- High-pressure gas wells: Extreme pressure rating for deep, high-pressure gas reservoir stimulation
- Deep shale gas development: Engineered for deep shale plays with high bottomhole pressures
- HPHT fracturing conditions: Designed for high-pressure high-temperature reservoir stimulation
When does your well actually need a 20,000 psi (140 MPa) frac pump?
The SYL3000-140Q is the top-pressure pump in the SJ Petro range: 3,000 hp, 140 MPa (20,000 psi). This is an extreme-service pump, not a standard workhorse. It exists for a narrow set of wells where treating pressure exceeds what a 15,000 psi pump can deliver — ultra-deep tight gas, HPHT completions, and re-fracs of high-stress reservoirs.
Choose this pump when:
- Design treating pressure exceeds 105 MPa. If your frac model calls for 110–135 MPa surface treating pressure (ultra-deep gas wells, high-closure-stress reservoirs), you cannot run a 15,000 psi pump — it would operate beyond rating. The 140 MPa class is the only option.
- You drill ultra-deep unconventional wells (7,000+ m). At these depths, closure stress and near-wellbore friction push treating pressure into the 20,000 psi class. Standard shale wells (3,000–5,000 m) rarely need it.
- You are doing HPHT re-fracturing. Re-fracs of old wells often face higher stress than the original treatment because the reservoir has been depleted and re-pressurized. If your re-frac program needs 120+ MPa, this pump is the answer.
- Downtime cost is extreme. A 20,000 psi pump is more expensive per unit and harder to source. If you only occasionally need this pressure class, consider renting rather than buying. If it is a core part of your campaign, owning is justified.
SYL3000-140Q vs SYL2300Q-105Q–20,000 psi or 15,000 psi?
- SYL2300Q-105Q (15,000 psi): The standard for shale and tight-oil fracs. Lower cost, proven at scale, enough for 95% of onshore completions.
- SYL3000-140Q (this pump): Only for wells whose design pressure exceeds 105 MPa. You pay a premium for the 140 MPa fluid end and 3,000 hp power — justified when the well program demands it.
Operating sequence
The hydraulic fracturing operation follows these key steps:
- Site setup: Frac unit positioned at wellhead, high-pressure iron connected to manifold and wellhead
- Pre-job checks: Operator verifies pump condition, pressure safety valves, and data acquisition system calibration
- Slurry preparation: Sand blender mixes proppant with fracturing fluid at controlled concentration
- Pumping stage: Frac pump delivers high-pressure slurry at controlled rate, operator monitors pressure and proppant concentration
- Stage completion: After each stage, well is flushed and pressure is monitored before next stage
Common selections
- Electric drive conversion: customized configuration tailored to your field conditions
- higher pressure 175 MPa: customized configuration tailored to your field conditions
- cold weather package.: customized configuration tailored to your field conditions
- Automated control system: PLC-based control with touchscreen HMI
- Data acquisition and recording: real-time monitoring and data logging
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete fracturing spread for shale gas stimulation?
A: Yes. We can supply complete fracturing spreads for shale gas and tight oil stimulation: frac pumps, sand blenders, manifolds, and data vans as a package, engineered to work together for onshore oilfield hydraulic fracturing projects.
Q: Can you customize fracturing units for high-pressure and high-volume operations?
A: Yes. We customize fracturing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need diesel, electric, or hybrid configurations, send your site conditions and we will return a tailored frac unit configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has over 30 years of experience manufacturing fracturing equipment for oilfield stimulation. Our fracturing trucks, blenders, and sand handling units have been deployed in shale gas and tight oil operations across North America, the Middle East, and Central Asia. All units are API-certified and available with diesel, electric, or hybrid drive options to match your field conditions and emission requirements.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.