Solutions

Cold Weather Equipment

Winterized oilfield equipment built to start and run through deep freeze, for northern oil regions and year-round winter drilling programs.

Overview

What cold weather does to oilfield equipment

When ambient temperature drops below minus 20 C, standard oilfield equipment simply stops. Diesel fuel gels and waxes, engine oil thickens to the consistency of honey, and batteries lose cranking capacity by half or more. Hydraulic seals lose elasticity, water-based drilling fluids freeze solid in the lines, and even steel becomes brittle. A rig that starts reliably at plus 10 C may take hours of block-heater soak in a northern January.

The cost of not winterizing is not just inconvenience. Lost rig-up time on a single cold morning can run into tens of thousands of dollars in rig cost and crew time. A rig that sits through a northern winter without proper lay-up can develop corrosion, frozen piping and seized hydraulics that take weeks to remedy the next season.

Overview

The winterization package

A properly winterized rig starts with engine and fluid systems: engine block heaters, coolant heaters, battery blankets and winter-grade diesel. Hydraulic systems use Arctic-grade oil with pour points below the expected minimum, and water-based systems are either drained, winterized with antifreeze, or kept warm by heat tracing through the shutdown period.

Enclosed, heated operator cabins keep the crew working through the cold. Piping and valve manifolds are heat-traced and insulated so that cement slurry, mud and water do not set or freeze between operations. The electrical system is rated for cold cranking, with oversized battery capacity and quick-disconnect external start provisions.

On frozen ground, mobility becomes a separate problem. Conventional tires break through thin ice and soft muskeg, bogging the rig down. Wheel-rail undercarriage spreads the load over tracks, giving the rig traction on frozen and soft ground without a paved road.

Overview

Specifying the winterization level

Not every northern location needs the same winterization. A rig that operates through a Canadian winter at minus 40 C needs a deeper package than a rig working in a milder northern climate that only sees a few weeks of sub-zero weather. Tell us the expected minimum temperature, whether the rig stays parked through the winter or runs year-round, and how the crew handles long shutdowns. We will size the heaters, fluids and insulation to that actual regime, so you do not pay for winterization you will not use, or under-build the rig and lose days to cold.