Permanent Installation | Offshore Ready

Skid Mounted Workover Rig for Permanent & Offshore Use

A skid mounted workover rig is built on a steel skid base rather than a truck or trailer chassis. It is designed for permanent or semi-permanent installation at a single well site or on an offshore platform. Skid rigs are ideal when mobility is not the primary concern.

Skid mounted workover rig for permanent installation

What Is a Skid Mounted Workover Rig?

A skid mounted workover rig is a well intervention unit mounted on a steel framework (skid) that can be lifted by crane and bolted to a foundation. Unlike truck or trailer-mounted rigs, skid rigs are not self-propelled. They are designed for locations where the rig stays in place for an extended period.

Key Characteristics

  • Skid base: Heavy steel frame that the entire rig is built upon
  • Crane-lifted: Requires crane for installation and relocation
  • Bolted foundation: Fixed to concrete or steel foundation at the well site
  • Compact footprint: Components arranged for space efficiency
  • Electric drive standard: VFD electric motors are the standard choice

Typical Capacity Range

  • 150 ton: Medium workover, standard tubing pulling
  • 225 ton: Deep workover, heavier completion strings
  • 300 ton: Heavy intervention, casing pulling
  • 450-500 ton: Ultra-heavy intervention, deep casing recovery

Where Skid Mounted Workover Rigs Are Used

Offshore Platforms

On offshore oil and gas platforms, space is extremely limited. Skid mounted workover rigs are designed to fit within the platform's footprint. They must also meet marine standards: corrosion protection, compact design, safety systems and DNV certification. Skid rigs are the standard for offshore platform workover operations.

Permanent Well Sites

In mature oil fields, wells are serviced from permanent locations. A skid rig installed at a central well pad can service multiple wells over many years. The rig stays in place for the life of the field. This is common in onshore production areas with many closely spaced wells.

Deep Well Workover

For ultra-deep wells (5,000-7,000 m+), the workover rig becomes too large and heavy for road transport. Skid rigs are the only practical option. They can be built on-site or transported in sections and assembled at the well location.

Remote Locations

In remote locations with poor road access, skid rigs can be transported by helicopter, barge or tracked vehicle. The modular skid design allows the rig to be broken into smaller loads that can be moved over difficult terrain.

Skid Mounted vs Mobile Workover Rigs

The choice depends on your operating model and mobility requirements:

Factor Skid Mounted Mobile (Truck/Trailer)
Mobility Low (requires crane) High (self-propelled or towed)
Rig-up time 3-7 days 2-6 hours
Max capacity Up to 500+ ton Typically up to 450 ton
Footprint More spread out More compact
Initial cost Lower (no chassis cost) Higher (includes chassis)
Operating cost per move Higher (crane + disassembly) Lower (drive directly)
Best for Offshore, permanent sites, deep wells Multi-well pads, frequent moves, onshore

Skid Mounted Workover Rig Model Range

Our skid mounted workover rig lineup covers the range from medium workover to heavy intervention:

Model Lifting Capacity Mast Height Winch Power Typical Application
SJW150-S 150 ton 32 m 2 x 350 kW Medium workover, completion work
SJW225-S 225 ton 36 m 3 x 350 kW Deep workover, heavier strings
SJW300-S 300 ton 40 m 3 x 500 kW Heavy workover, casing pulling
SJW450-S 450 ton 45 m 4 x 600 kW Ultra-heavy intervention
SJW500-S 500 ton 48 m 4 x 750 kW Deep casing recovery, offshore

Engineering Advantages of Our Skid Rigs

Modular Design

Our skid rigs are built in modules that can be transported separately and assembled on site. This is essential for remote locations where large loads cannot be transported as a single piece. Modular design also simplifies maintenance and upgrades.

VFD Electric Drive Standard

All our skid rigs come standard with VFD (Variable Frequency Drive) electric drive. This provides precise hoisting control, high efficiency and low energy consumption. Electric drive is also the standard choice for offshore platforms where emissions and noise are regulated.

Offshore Configuration Option

For offshore platform use, we offer offshore-rated configurations: corrosion protection, DNV certification, hazardous area classification, compact footprint and marine-grade materials. These rigs are designed to withstand the harsh offshore environment.

Compact Footprint Design

Our skid rigs are designed with a compact footprint in mind. Components are arranged efficiently to minimize the space required on the platform or well pad. This is critical for offshore platforms where every square meter is valuable.

API 4F Certified Mast

All our workover rig masts are API 4F certified. They are designed and tested to handle the specified lifting capacity plus safety margin. Hydrostatic and load testing are performed on every unit before shipment.

Global Service Support

Our engineers provide on-site commissioning, operator training and ongoing technical support. We have service partners in major oil-producing regions worldwide. Critical spare parts are stocked in regional warehouses for fast delivery.

Frequently Asked Questions About Skid Mounted Workover Rigs

Can a skid mounted workover rig be relocated after installation?

Yes, but it requires a crane and disassembly. The rig must be broken down into its modular components, lifted onto trucks or barges, transported to the new location, and reassembled. This typically takes 1-2 weeks. For frequent moves, a mobile rig is more efficient. For permanent or semi-permanent installations, a skid rig is the better choice.

Do you offer offshore-rated skid workover rigs?

Yes. We offer offshore-rated skid workover rigs with DNV certification, corrosion protection, hazardous area classification and marine-grade materials. These rigs are designed for offshore platform workover operations. We can customize the rig to meet your platform's specific space and weight requirements.

What is the maximum capacity of a skid mounted workover rig?

Our standard skid workover rig lineup goes up to 500 ton lifting capacity. For larger capacity requirements, we can design custom skid rigs based on your specific well conditions and intervention requirements. The exact capacity depends on the well design, tubing weight and operational requirements.

How much does a skid mounted workover rig cost?

The cost depends on capacity and configuration. A 150-ton skid rig may start from USD 500,000-800,000. A 300-ton rig typically costs USD 1-1.5 million. A 500-ton offshore-rated rig can cost USD 2-3 million. Offshore-rated or custom configurations add additional cost. Compare this to a truck-mounted rig at similar capacity —skid rigs are typically 20-30% cheaper due to the absence of a chassis.

What is the lead time for a skid mounted workover rig?

Standard configuration skid workover rigs take approximately 10-15 months from order confirmation. Offshore-rated or custom configurations may require 15-18 months. This includes engineering design, fabrication, load testing and factory acceptance testing. On-site commissioning typically takes 1-2 weeks after delivery.

Need a Skid Mounted Workover Rig?

Tell us your required lifting capacity and intended application (onshore or offshore). Our engineering team will recommend the optimal skid rig configuration and provide a detailed quotation within 48 hours.