Coiled Tubing Units for Well Intervention
SJ Petroleum Machinery manufactures a complete line of coiled tubing units for under-pressure well intervention, well cleanout, milling, acidizing, and completion operations. Our units range from 180 kN light-duty truck-mounted units for shallow well intervention to 450 kN ultra-heavy-duty skid-mounted units for deep HPHT wells.
Each CT unit is engineered as an integrated system —injector head, reel, power pack, control cabin, and auxiliary equipment —designed to work together as a complete intervention spread. All units are API-certified and factory-tested before shipment, with commissioning and training support on site.
Key features across the range
180–450 kN pulling force
Injector heads are available in multiple force ratings to match your well depth and pipe size. Grip blocks and chain drive are designed for continuous duty in both pulling and snubbing modes.
1.75–2.5 inch coil OD
Reels are available with tubing diameters from 1.75 inch to 4.5 inch, with capacities up to 9000 m. Automatic level winding ensures uniform spooling and extends tubing life.
Diesel or electric drive
Hydraulic power packs are available with diesel engines or electric motors, configured for your site power supply and emission regulations. All units include redundant critical systems.
Remote operator station
Stand-alone air-conditioned control cabin with pressure gauges, depth and force indicators, and data recorder. Operators work safely away from high-pressure lines.
Truck, skid, or trailer
Units are available as truck-mounted for road mobility, skid-mounted for permanent or offshore installation, or trailer-mounted for rapid deployment. No disassembly needed for transport.
Factory-tested before shipment
Every unit undergoes full pull testing, function testing, and pressure testing before leaving the factory. We provide test reports and API certification documents with each shipment.
Where CT units fit
Coiled tubing units are essential for a wide range of well intervention operations:
- Under-pressure well intervention: Perform work on live wells without killing the well, saving time and formation damage
- Well cleanout and milling: Remove scale, sand, and debris from wellbore; mill plugs and obstructions
- Fishing and acidizing: Retrieve lost tools, perform acid stimulation treatments in horizontal wells
- Gas well deliquification: Remove liquid loading from gas wells to restore production rates
Choosing the right coiled tubing unit — pull force is the first decision
The SJ coiled tubing line spans 180 kN light-duty truck units to 450 kN ultra-heavy-duty skid units. The first decision in selection is pull force — it determines which injector head you need, which tubing sizes you can run, and which wells you can service. The second decision is mounting: truck, trailer, or skid, matching your logistics and site power.
Choose your unit class when:
- 180 kN (SLG180): Shallow well intervention and cleanout, tubing 1.75–2.375 inch. The light-duty entry for routine intervention programs.
- 270 kN (SLG270): Conventional well intervention and completion, tubing 2–2.875 inch. The mid-duty standard for most onshore programs.
- 360 kN (SLG360): Deep well intervention and horizontal wells, tubing 2.375–3.5 inch. For longer reach and heavier operations.
- 450 kN (SLG450): Deep HPHT wells and large-bore intervention, tubing 2.875–4.5 inch, reels to 9,000 m. The ultra-heavy-duty top of the line.
Truck vs trailer vs skid — mounting follows your logistics
- Truck-mounted: Self-propelled, fastest for frequent moves between scattered wells. The most common CT format worldwide.
- Trailer/skid: Tractor-based or permanent installation — for pad campaigns, platforms, or sites where the unit stays for long campaigns.
- Skid-mounted (270–360 kN): Stationary installation for permanent well sites or offshore platforms, electric or diesel drive per site power.
Operating sequence
The coiled tubing intervention operation follows these key steps:
- Site setup: CT unit positioned at wellhead, injector head installed on BOP stack, safety systems verified
- Pre-job checks: Operator inspects coil tubing condition, injector head, and control system calibration
- Tubing run-in: Reel feeds coiled tubing through injector head, which pushes pipe into the well to target depth
- Intervention work: Perform cleanout, milling, acidizing, or other intervention operations while circulating
- Pull out of hole: After job completion, tubing is pulled out and wound back onto the reel
Common selections
- Cold weather package: customized configuration tailored to your field conditions
- desert package: customized configuration tailored to your field conditions
- electric drive conversion: customized configuration tailored to your field conditions
- BOP integration: customized configuration tailored to your field conditions
- downhole tools package: customized configuration tailored to your field conditions
- data acquisition system.: customized configuration tailored to your field conditions
- Automated control system: PLC-based control with touchscreen HMI
- Data acquisition and recording: real-time monitoring and data logging
Buyer questions
Q: Which CT size do I need?
A: Depends on well depth, tubing size, and intervention type. Send us your well program and we will recommend the right unit size.
Q: Do you supply the complete CT spread?
A: Yes. We can supply CT units, pumping skids, nitrogen units, BOPs, and downhole tools as a complete package.
Q: What is the lead time?
A: 8–10 months for a new CT unit, depending on option list. Refurbished units available in 90–120 days.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery is a factory-direct manufacturer of oilfield equipment since the 1980s. Our CT equipment is API-certified and has been exported to operators in the Middle East, Central Asia, Africa, Southeast Asia, and South America. We offer competitive pricing, reliable after-sales support, and customizable configurations for your specific field conditions.
Ready to discuss your CT requirements?
Send your well program, target depth, tubing size, and intervention type. We will return a tailored CT unit configuration and pricing within 48 hours.