Compact Platform Footprint
On offshore platforms, every square meter costs money. A skid mixer eliminates the truck cab and chassis, freeing up valuable deck space. All components are arranged for optimal space utilization.
A skid mounted batch mixer is designed for permanent installation on offshore platforms, drilling rigs or permanent wellsites. It consolidates all mixing functions on a single steel frame, optimized for space constraints and connected to platform utilities.
Skid-mounted batch mixers are the preferred choice when mobility is not required and space or emission constraints favor a fixed installation. Here are the key advantages:
On offshore platforms, every square meter costs money. A skid mixer eliminates the truck cab and chassis, freeing up valuable deck space. All components are arranged for optimal space utilization.
Skid mixers connect directly to the platform's power supply, water system and control network. No need for a separate diesel engine or on-board water tank —the platform provides these utilities.
Electric-driven skid mixers produce zero exhaust emissions. This is critical on offshore platforms where ventilation is limited, and in environmentally sensitive onshore locations.
Once installed, the skid mixer is bolted down and connected. It is always ready for use —no need to mobilize a truck to the location. This is ideal for permanent drilling locations or frequent workover wellsites.
Our skid-mounted batch mixers are available in 1.6 m³, 2.0 m³ and 3.0 m³ batch volumes, with both electric and diesel drive options.
| Model | Batch Volume | Drive Type | Density Accuracy | Lifting Rating |
|---|---|---|---|---|
| SHJC16 Skid | 1.6 m³ (1600 L) | Electric VFD / Diesel | ± 0.02 g/cm³ | DNV certified |
| SHJC20 Skid | 2.0 m³ (2000 L) | Electric VFD / Diesel | ± 0.02 g/cm³ | DNV certified |
| SHJC30 Skid | 3.0 m³ (3000 L) | Electric VFD (dual motor) | ± 0.01 g/cm³ | DNV certified |
Skid mounted batch mixers are deployed in a variety of permanent installation scenarios:
Electric-driven skid mixers are standard on offshore drilling platforms. They integrate with the platform's mud system and central cementing unit. DNV certification is required for lifting and installation.
On floating drilling units, skid mixers must meet strict weight, stability and vibration requirements. We provide detailed weight distribution and center of gravity data for your naval architect.
In remote desert or arctic locations with permanent drilling infrastructure, skid mixers are installed in a dedicated cementing bay. They connect to bulk cement silos and central water systems.
Service company workshops and well servicing yards use skid mixers for batch preparation. The skid can be installed inside a building for climate control and dust control.
Every skid includes four DNV-certified lifting lugs. We provide detailed lifting plans, center of gravity calculations and rigging diagrams for your installation engineer.
For offshore service, all wetted parts (tub, piping, pump internals) are 316L stainless steel. This prevents corrosion from saltwater exposure and extends equipment life.
The skid is split into transportable modules (mixing tub, pump module, control cabinet). Each module fits through standard platform access hatches for installation and maintenance.
We provide full interface documentation: power requirements, control signals, water connections, discharge line size and ventilation requirements. Your platform engineer reviews these before fabrication.
For hazardous area installations, we provide ATEX Zone 2 rated electrical components, explosion-proof enclosures and intrinsically safe instrument systems.
Offshore-rated units include epoxy coating, cathodic protection and stainless steel fasteners. Designed for 20+ years of saltwater exposure.
Browse our standard skid-mounted batch mixers. Every model can be customized for your platform layout, power system and regulatory requirements.
A 1.6 m³ skid batch mixer weighs approximately 4-6 tonnes dry. The lifting lugs are designed for this weight plus a 1.5x safety factor. We provide detailed weight breakdown by module for your installation planning.
Technically yes, but it is rarely cost-effective. The mixing system itself is the same; the difference is the frame and integration. If you need both mobility and fixed installation, we recommend a trailer-mounted unit —it provides road mobility and can be parked and connected like a skid.
A typical 1.6 m³ electric skid mixer requires 440V/3-phase/60Hz or 380V/3-phase/50Hz power supply, with a connected load of approximately 30-45 kW. We provide detailed electrical drawings and harmonic analysis for your platform electrical engineer.
Yes. Our field service engineers can travel to your platform or wellsite to supervise installation, commissioning and operator training. This service is available for international projects; travel costs are quoted separately.
Standard skid mixers take approximately 5-6 months. Offshore-rated custom units with DNV certification, stainless steel wetted parts and ATEX rating typically require 8-10 months from order confirmation to delivery.
Send us your platform layout, power availability and batch volume requirements. Our engineering team will provide a 3D layout proposal and detailed quotation within 5 working days.