Hydraulic Fracturing Overview
Hydraulic fracturing creates conductive fractures in rock to improve hydrocarbon flow. A modern shale well goes through dozens of stages, each requiring precise fluid volume, proppant schedule and pressure control.
How Fracturing Works
Fluid is pumped downhole at rates and pressures that exceed formation breakdown. The fracture propagates. Proppant (sand or ceramic) holds it open when pressure is released. Hydrocarbons flow through the proppant pack.
Stage Design
Each stage targets a limited interval. Plug-and-perf for cased holes. Sliding sleeve for open hole. Stage count ranges from 10 in conventional wells to 50+ in modern shale wells.
Fluid Types
Slickwater for low viscosity, high-rate jobs. Linear gel for moderate viscosity. Crosslinked gel for high viscosity, proppant-carrying applications. Choice depends on formation and proppant size.
Equipment Spread
Pumper trucks or electric skids provide pressure. Blender mixes fluid and proppant. Sand conveyor delivers sand. Manifold distributes flow to the wellhead. All must be sized for the stage design.
Pressure and Rate
Typical surface pressure: 70-105 MPa. Flow rates: 10-20 m3/min per pumper. Higher rates create wider fractures. Pressure controls fracture height and containment.
Key parameters to confirm before ordering
- Creates conductive fractures in tight rock
- Fluid pumped at breakdown pressure, proppant holds fracture open
- Stage count: 10 (conventional) to 50+ (shale)
- Requires pumps, blenders, manifolds, data vans
Equipment for this application
Need help choosing?
Send us your well program, site conditions, and operating requirements. Our engineers will recommend the right configuration within 48 hours.
Contact Our Engineers