Cementing Solutions

Choose the Right Cementing Unit for Your Well

Cementing is not a one-size-fits-all operation. Primary cementing, squeeze cementing, liner cementing, and plug cementing each demand different pressure ratings, pump rates, and equipment configurations. We help you match the cementing spread to the job —not just pick the largest truck in the catalog.

Cementing Solutions by Well Type & Operation

The right cementing equipment depends on what you are cementing and how deep it goes. Here is how we typically match cementing units to job types:

Shallow Wells

Surface & Shallow Well Cementing (0–3000 m)

Recommended: Single-pump cementing unit (35–70 MPa)

  • Max working pressure 35–70 MPa
  • Pump rate 400–600 L/min sufficient for shallow casing
  • Single truck-mounted unit for small well sites
  • Ideal for surface casing, conductor cementing, and shallow development wells
  • Lower CAPEX for operators with limited cementing volume
View Single-Pump Cementing Truck
Medium Depth

Production Casing Cementing (2000–4000 m)

Recommended: Double-pump cementing unit (70–105 MPa)

  • Max working pressure 70–105 MPa
  • Twin pumps for redundancy and higher rate
  • Dual batch mixer for continuous slurry circulation
  • Ideal for production casing, intermediate casing, and regular development wells
  • Most versatile configuration for general cementing contractors
View Double-Pump Cementing Truck
Deep / High Pressure

Deep & HPHT Cementing (4000 m+)

Recommended: High-pressure twin-pump unit (105 MPa+)

  • Max working pressure 105–140 MPa
  • High-rate centrifugal pumps for large slurry volumes
  • Automatic density control and data recording
  • Ideal for deep wells, HPHT formations, and liner cementing
  • Required for sour service and high-pressure gas wells
View High-Pressure Cementing Unit

Cementing Solutions by Operation Type

Beyond well depth, the type of cementing operation drives the equipment package. Different jobs need different combinations of pumps, mixers, and additive systems:

Primary Cementing

Casing & Liner Cementing

For primary cementing where you need to place a large slurry volume in a single job:

  • Twin cementing pumps for redundancy
  • Batch mixer with recirculation for consistent slurry
  • Cement silo or bulk tank supply
  • Additive system for slurry property adjustment
Squeeze Cementing

Remedial & Squeeze Cementing

For squeeze jobs where you need precise pressure control and smaller slurry volumes:

  • High-pressure pump (100 MPa+) for squeezing into channels
  • Smaller batch mixer for accurate slurry measurement
  • Precision pressure control for leak-off tests
  • Retrograde or accelerated cement systems as needed
Plug & Abandonment

Plug Cementing & Well Abandonment

For plug and abandonment jobs where you need multiple plugs at different depths:

  • Reliable pump with long operating hours
  • Retrievable cement plug placement tools
  • Long-life mixing system for repeated jobs
  • Environmentally compliant slurry systems

Complete Cementing Spread Packages

For cementing contractors running full-service operations, we offer complete spread packages —not just individual trucks. A typical cementing spread includes:

Core Equipment

Cementing Trucks

2–4 twin-pump cementing trucks depending on job size. For large jobs, we can provide 140 MPa high-pressure units for HPHT applications.

Support Equipment

Mixing & Bulk Systems

Batch mixers, cement bulk tanks, and continuous liquid additive systems. These ensure consistent slurry density and accurate chemical addition.

Data & Control

Data Van & Control Systems

Automated cementing control systems with real-time density, pressure, and rate monitoring. Critical for deep and high-pressure jobs.

Need help sizing your cementing spread?

Tell us your typical well depth, pressure rating, and how many cementing jobs you run per month. We will recommend the right spread configuration —from single-truck operators to full-service cementing companies.

Contact Our Cementing Engineering Team