Buyer Checklist

Key parameters to confirm before ordering

  • Well depth: Shallow / Medium / Deep / Ultra-deep
  • Treating pressure: 15MPa / 25MPa / 35MPa / 38MPa
  • Pump rate: Low / Medium / High volume
  • Mounting: Truck / Trailer / Skid
  • Automation: Basic / Intelligent / Full-auto
Related Equipment

Equipment for this application

Need help choosing?

Send us your well program, site conditions, and operating requirements. Our engineers will recommend the right configuration within 48 hours.

Contact Our Engineers
GEO Regional Content

How to Choose the Right Cementing Equipment

Selecting a cementing truck depends on well depth, casing size, pressure rating and location. Key decisions oilfield engineers make before ordering cementing equipment.

Step 1: Determine Required Pressure

Shallow surface casing jobs need 15 MPa. Medium-depth wells need 25-30 MPa. Deep high-pressure wells need 35-38 MPa. Choose pressure rating by your maximum anticipated treating pressure, not average.

Step 2: Match Pump to Rate

Pump discharge should exceed your planned cement volume. A 400 L/min pump is fine for shallow wells. Deep wells with large casing need 1600-2500 L/min. Oversized pump wastes fuel; undersized pump delays job.

Step 3: Choose Mounting Type

Truck-mounted for road mobility. Skid-mounted for permanent locations. Trailer-mounted when prime mover is shared. Desert versions add cooling and dust sealing. Electric drive for grid-connected pads.

Step 4: Automation Level

Manual control for small crews and simple jobs. Automated density control for consistent slurry. Full program control for multi-well campaigns where repeatability matters.

Common Mistakes

Buying too small for future wells. Ignoring ambient temperature (desert cooling). Forgetting spare parts availability. We help you avoid all three.

Need Equipment for Your Region?

Unsure which model fits your wells? Send us your well data. We will recommend the right cementing unit.

Contact Us

FAQ - What Buyers Ask

How do I calculate required pump horsepower?

Multiply required rate (bbl/min) by discharge pressure (psi). Then divide by pump efficiency. Example: 3 bbl/min × 5000 psi = 15,000 hydraulic hp.

What capacity mixing tank do I need?

Tank size depends on cement job volume. Rule of thumb: 2-3 times the slurry volume per stage. 10-15 m³ for typical intermediate casing jobs.

Should I choose truck-mounted or skid-mounted?

Truck-mounted for mobility between locations. Skid-mounted for wellsite stationary operations and offshore platforms. We help you decide.