SGJ1600-28 Single Pump Cementing Truck
1600 hp single pump cementing truck, 28 MPa high-pressure, for deep and ultra-deep well intermediate casing cementing. This 1600 hp cementing unit (28 MPa working pressure) is designed for professional oilfield service companies who need reliable, field-proven cementing equipment that performs consistently under continuous well cementing duty.
SJ Petroleum Machinery manufactures this 28 MPa cementing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Power: 1600 hp
The 1600 hp diesel engine and drivetrain are rated for continuous cementing pump duty. Critical components (Cummins engine, Siemens control system) are sourced from reputable manufacturers with global service support.
Working pressure: 28 MPa (4,000 psi)
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, engine controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This 1600 hp, 28 MPa high-pressure cementing truck for sale is ideal for:
- Deep well intermediate casing cementing: 4000-6000m depth, 28 MPa pressure rating handles deep well cementing programs
- High-pressure gas wells: Reliable for HPHT conditions with safety-critical cementing jobs
- Production casing cementing: Sufficient power and pressure for long cement columns in deep gas wells
- Extended-reach wells: High displacement rate for horizontal and directional well cementing
Is SGJ1600-28 the right choice in the 25–30 MPa class?
The SGJ1600-28 sits in the middle of our cementing truck lineup: 1600 hp, 28 MPa. It is not the highest pressure (that is the 38 MPa SGJ2500), and it is not the highest flow at moderate pressure (that is the 1000 hp SGJ1000). It is the balanced workhorse for deep onshore wells where you need both meaningful pressure and decent volume.
Choose this model when:
- Well depth is 2,500–4,500 m. This is the sweet spot for 28 MPa. Intermediate casing at 2,500–3,500 m is comfortable; production casing at 3,500–4,500 m is the upper limit. Beyond 4,500 m, you want the 38 MPa SGJ2500 for safety margin.
- You need both pressure and volume. The 1600 hp engine gives you ~15–18 bbl/min flow rate at 28 MPa — enough for large production casing jobs (30–50 m³ cement) without slowing down. The 600 hp / 30 MPa model would struggle at this volume.
- Onshore deep development drilling. Think shale oil/gas development fields in China, the Middle East, or North America. These wells are not ultra-deep (you do not need 38 MPa), but they are deeper than shallow onshore (you need more than 21 MPa).
- You want one unit that can cover multiple jobs. If your fleet does not have enough work to justify a dedicated 38 MPa unit for occasional deep wells, this model covers 80% of onshore cementing jobs with one machine.
SGJ1600-28 vs SGJ600-30 vs SGJ2500-38 — which pressure class do you actually need?
- SGJ600-30 (600 hp, 30 MPa): Choose for shallow-to-medium wells (< 3,000 m) where volume is small. Lower cost, lower fuel consumption.
- SGJ1600-28 (1600 hp, 28 MPa, this model): Choose for deep onshore development wells (2,500–4,500 m) where you need both pressure and volume. Best balance of capability and cost.
- SGJ2500-38 (2500 hp, 38 MPa): Choose for ultra-deep wells (> 4,500 m) or high-pressure gas wells where 28 MPa is not enough. Highest cost, highest capability.
Operating sequence
The cementing operation follows these key steps:
- Site positioning: Truck or skid unit positioned at wellhead, suction and discharge lines connected
- Pre-job checks: Operator verifies fluid end condition, safety valves, and control system calibration
- Mix preparation: Mixing system prepares cement slurry to target density and specifications
- Pumping stage: Pump delivers slurry at controlled rate and pressure, operator monitors real-time data
- Displacement: After cement slurry, displacement fluid pushes cement to target depth
Common selections
- 28-inch pump fluid end: larger fluid end for higher pressure and rate deep well cementing
- Twin pump parallel operation: dual pump configuration for high-rate primary cementing
- Electric drive option: electric motor drive for grid-powered locations
- Deep well package: upgraded high-pressure components for 5000m+ wells
- Automated slurry mixing: computer-controlled mixing ratio for consistent cement slurry quality
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete cementing spread for oil well cementing?
A: Yes. We can supply complete cementing spreads for oil well cementing operations: cementing trucks, batch mixers, cement tanks, and additive systems as a package, engineered to work together for onshore and offshore oilfield projects.
Q: Can you customize cementing units for deep well and high-pressure operations?
A: Yes. We customize cementing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need desert, cold-weather, or offshore configurations, send your site conditions and we will return a tailored cementing truck configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has been manufacturing cementing equipment since the 1980s, with over 500 cementing units delivered to oilfield operators in the Middle East, Central Asia, Africa, and Southeast Asia. Our cementing trucks and skids are API-certified and customized for well depths ranging from shallow to ultra-deep wells. We provide factory-direct pricing, global after-sales support, and on-site commissioning for your cementing operations.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.