SGJ2500-38 High-Power Cementing Truck
2500 hp high-power cementing truck, 38 MPa ultra-high-pressure, for ultra-deep and HPHT well cementing. This 2500 hp cementing unit (38 MPa working pressure) is designed for professional oilfield service companies who need reliable, field-proven cementing equipment that performs consistently under continuous well cementing duty.
SJ Petroleum Machinery manufactures this 38 MPa cementing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Power: 2500 hp
The 2500 hp diesel engine and drivetrain are rated for continuous cementing pump duty. Critical components (Cummins engine, Siemens control system) are sourced from reputable manufacturers with global service support.
Working pressure: 38 MPa (5,500 psi)
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, engine controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This 2500 hp, 38 MPa ultra-high-pressure cementing truck for sale is ideal for:
- Ultra-deep wells (6000m+): 38 MPa working pressure handles cementing for the deepest onshore wells
- HPHT (high-pressure high-temperature) wells: Designed for extreme conditions in deep gas and geothermal projects
- Deep gas well cementing: Reliable zonal isolation for high-pressure gas reservoirs
- Long cement column cementing: High-power pump for long strings with large cement volumes
Is SGJ2500-38 the right model for your well?
The SGJ2500-38 is a 2500 hp, 38 MPa high-power cementing truck. It is designed for deep and ultra-deep well production casing and liner cementing where high pressure and large volume are required.
Choose this model when:
- Well depth: 3,500–6,000 m — 38 MPa working pressure covers deep and ultra-deep well production casing cementing.
- Cement volume: 30–60 m³ per stage — High-power pump with large mixing system handles large-volume deep well cement jobs without stopping.
- High-pressure gas well: required — 38 MPa rating provides safety margin for high-pressure gas well cementing where kick risk is a concern.
- Continuous duty: required — 2500 hp engine is rated for continuous cementing pump duty, suitable for long liner cementing operations.
SGJ2500-38 vs SGJ1600-28 — which to choose?
- SGJ2500-38 (this model): 2500 hp, 38 MPa. Best for deep wells > 3,500 m, high-pressure gas wells, and large-volume cement jobs.
- SGJ1600-28: 1600 hp, 28 MPa. Choose for intermediate wells 2,500–4,000 m where 38 MPa is not required, saving purchase and operating cost.
Operating sequence
The cementing operation follows these key steps:
- Site positioning: Truck or skid unit positioned at wellhead, suction and discharge lines connected
- Pre-job checks: Operator verifies fluid end condition, safety valves, and control system calibration
- Mix preparation: Mixing system prepares cement slurry to target density and specifications
- Pumping stage: Pump delivers slurry at controlled rate and pressure, operator monitors real-time data
- Displacement: After cement slurry, displacement fluid pushes cement to target depth
Common selections
- All-electric drive: customized configuration tailored to your field conditions
- remote monitoring: customized configuration tailored to your field conditions
- cold weather package.: customized configuration tailored to your field conditions
- Automated control system: PLC-based control with touchscreen HMI
- Data acquisition and recording: real-time monitoring and data logging
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete cementing spread for oil well cementing?
A: Yes. We can supply complete cementing spreads for oil well cementing operations: cementing trucks, batch mixers, cement tanks, and additive systems as a package, engineered to work together for onshore and offshore oilfield projects.
Q: Can you customize cementing units for deep well and high-pressure operations?
A: Yes. We customize cementing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need desert, cold-weather, or offshore configurations, send your site conditions and we will return a tailored cementing truck configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has been manufacturing cementing equipment since the 1980s, with over 500 cementing units delivered to oilfield operators in the Middle East, Central Asia, Africa, and Southeast Asia. Our cementing trucks and skids are API-certified and customized for well depths ranging from shallow to ultra-deep wells. We provide factory-direct pricing, global after-sales support, and on-site commissioning for your cementing operations.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.