SGJ600-30D Electric Drive Cementing Skid
Electric drive cementing skid, VFD driven, zero emissions, suitable for urban-fringe and environmentally sensitive areas. This electric-drive cementing unit (30 MPa working pressure) is designed for professional oilfield service companies who need reliable, field-proven cementing equipment that performs consistently under continuous well cementing duty.
SJ Petroleum Machinery manufactures this 30 MPa cementing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Power: Electric VFD
The electric motor and VFD drivetrain are rated for continuous cementing pump duty. Critical components (electric motor, Siemens VFD control system) are sourced from reputable manufacturers with global service support.
Working pressure: 30 MPa (4,350 psi)
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, motor controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This 600 hp, 30 MPa electric-drive skid cementing unit for sale is ideal for:
- Environmentally sensitive areas: Electric drive eliminates exhaust emissions for greenfield and protected areas
- Urban-fringe locations: Quiet operation suitable for populated areas with noise restrictions
- Grid-powered well sites: Utilizes local electricity for lower operating costs and reduced fuel logistics
- Permanent well locations: Skid-mounted design for fixed installations at long-term production sites
Is SGJ600-30D Electric Drive Skid the right choice for your operation?
The SGJ600-30D is an electric-drive, skid-mounted cementing unit. It shares the same 30 MPa fluid end and 600 hp output as the SGJ600-30 truck, but replaces the diesel engine with an electric motor powered by grid or generator. This makes it fundamentally different from truck-mounted units — optimized for stationary, long-term wellsite operations, not for moving between locations.
Choose this model when all of these apply:
- You have reliable grid or generator power at the wellsite. The 600 hp electric motor draws ~450 kW of power; you need a dedicated power supply that can handle continuous load for 4–8 hour cement jobs.
- The unit will stay at one wellsite for weeks or months. Skid-mounted means no road chassis, no cab, no driving license required. You save the cost of a truck chassis and a driver, but you also cannot just drive it to the next location — you need a crane and a truck to move it.
- Noise and emissions matter. Electric drive is much quieter than a diesel engine, and produces zero on-site emissions. This matters for urban-adjacent fields, environmentally sensitive areas, or offshore platforms where exhaust fumes are a safety hazard.
- Well depth is 2,000–3,500 m. 30 MPa working pressure covers intermediate and production casing cementing in this depth range. If you routinely drill deeper than 3,500 m, step up to the 38 MPa class.
SGJ600-30D (electric skid) vs SGJ600-30 (diesel truck) — which to choose?
- Choose SGJ600-30D (this model) if: You have grid power, the unit stays put for long periods, and noise/emissions regulations are tight. Lower operating cost per job (electricity is cheaper than diesel at scale), but higher upfront logistics cost for moving the skid.
- Choose SGJ600-30 (diesel truck) if: Your wells are spread out and you need to move rig-to-rig frequently, or there is no grid power at the location. You pay more for fuel and the truck chassis, but you can drive between wells in a day.
Operating sequence
The cementing operation follows these key steps:
- Site positioning: Truck or skid unit positioned at wellhead, suction and discharge lines connected
- Pre-job checks: Operator verifies fluid end condition, safety valves, and control system calibration
- Mix preparation: Mixing system prepares cement slurry to target density and specifications
- Pumping stage: Pump delivers slurry at controlled rate and pressure, operator monitors real-time data
- Displacement: After cement slurry, displacement fluid pushes cement to target depth
Common selections
- Gas generator grid connection: customized configuration tailored to your field conditions
- remote monitoring.: customized configuration tailored to your field conditions
- Automated control system: PLC-based control with touchscreen HMI
- Data acquisition and recording: real-time monitoring and data logging
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete cementing spread for oil well cementing?
A: Yes. We can supply complete cementing spreads for oil well cementing operations: cementing trucks, batch mixers, cement tanks, and additive systems as a package, engineered to work together for onshore and offshore oilfield projects.
Q: Can you customize cementing units for deep well and high-pressure operations?
A: Yes. We customize cementing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need desert, cold-weather, or offshore configurations, send your site conditions and we will return a tailored cementing truck configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has been manufacturing cementing equipment since the 1980s, with over 500 cementing units delivered to oilfield operators in the Middle East, Central Asia, Africa, and Southeast Asia. Our cementing trucks and skids are API-certified and customized for well depths ranging from shallow to ultra-deep wells. We provide factory-direct pricing, global after-sales support, and on-site commissioning for your cementing operations.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.