SGJ400-15 Single Pump Cementing Truck
400 hp single pump cementing truck, 15 MPa mid-low pressure, designed for shallow well and surface casing cementing. This 400 hp cementing unit (15 MPa working pressure) is designed for professional oilfield service companies who need reliable, field-proven cementing equipment that performs consistently under continuous well cementing duty.
SJ Petroleum Machinery manufactures this 15 MPa cementing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Power: 400 hp
The 400 hp diesel engine and drivetrain are rated for continuous cementing pump duty. Critical components (Cummins engine, Siemens control system) are sourced from reputable manufacturers with global service support.
Working pressure: 15 MPa (2,175 psi)
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, engine controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This 400 hp, 15 MPa cementing truck for sale is ideal for:
- Shallow well surface casing cementing: 1000-2000m depth, perfect for developmental wells and shallow oilfield operations
- Intermediate casing cementing: Mid-pressure 15 MPa rating handles intermediate string cementing for wells up to 3000m
- Plug cementing and squeeze jobs: Reliable pump performance for remedial cementing and plug-back operations
- Remote field operations: Road-legal truck-mounted design for easy mobilization between well sites
Is SGJ400-15 the right model for your well?
The SGJ400-15 is a 400 hp, 15 MPa single-pump cementing truck. It is designed for shallow well surface casing and conductor pipe cementing where high pressure is not required but mobility and quick setup matter.
Choose this model when:
- Well depth: 500–1,500 m — 15 MPa working pressure covers surface casing and conductor pipe cementing in shallow wells.
- Cement volume: 5–15 m³ per stage — Single pump with 1.0 m³ mixing tank handles shallow, small-volume cement jobs efficiently.
- Mobility requirement: high — Truck-mounted unit drives directly to the location, no disassembly needed for road transport.
- Budget: priority — Lower horsepower and single-pump design reduce purchase cost and fuel consumption per job.
SGJ400-15 vs SGJ600-21 — which to choose?
- SGJ400-15 (this model): 400 hp, 15 MPa. Best for shallow wells < 1,500 m, small-volume jobs, and budget-focused operations.
- SGJ600-21: 600 hp, 21 MPa. Choose for intermediate wells 1,500–3,000 m or if you may need higher pressure for future deeper wells.
Operating sequence
The cementing operation follows these key steps:
- Site positioning: Truck is parked at the wellhead, suction line connected to bulk cement supply, discharge line connected to cement head
- Pre-job checks: Operator verifies fluid end condition, safety valves, and control system calibration before starting
- Mix preparation: Mixing system draws cement powder and water, adjusts slurry density to target value
- Pumping stage: Plunger pump delivers slurry at controlled rate and pressure, operator monitors real-time data
- Displacement: After cement slurry, displacement fluid pushes cement to the target depth
Common selections
- Electric drive conversion: customized configuration tailored to your field conditions
- cold weather package: customized configuration tailored to your field conditions
- desert package.: customized configuration tailored to your field conditions
- Automated control system: PLC-based control with touchscreen HMI
- Data acquisition and recording: real-time monitoring and data logging
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete cementing spread for oil well cementing?
A: Yes. We can supply complete cementing spreads for oil well cementing operations: cementing trucks, batch mixers, cement tanks, and additive systems as a package, engineered to work together for onshore and offshore oilfield projects.
Q: Can you customize cementing units for deep well and high-pressure operations?
A: Yes. We customize cementing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need desert, cold-weather, or offshore configurations, send your site conditions and we will return a tailored cementing truck configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has been manufacturing cementing equipment since the 1980s, with over 500 cementing units delivered to oilfield operators in the Middle East, Central Asia, Africa, and Southeast Asia. Our cementing trucks and skids are API-certified and customized for well depths ranging from shallow to ultra-deep wells. We provide factory-direct pricing, global after-sales support, and on-site commissioning for your cementing operations.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.