SHJC16 Batch Mixer Truck
16 bbl batch mixer truck, truck-mounted, paired with cementing trucks. This heavy-duty cementing unit (high-pressure working capacity) is designed for professional oilfield service companies who need reliable, field-proven cementing equipment that performs consistently under continuous well cementing duty.
SJ Petroleum Machinery manufactures this high-pressure cementing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
The diesel engine and drivetrain are rated for continuous cementing pump duty. Critical components (Cummins engine, Siemens control system) are sourced from reputable manufacturers with global service support.
Capacity: 16 bbl/batch
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, engine controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This 16 batch mixer truck for sale is ideal for:
- Conventional cementing operations: Standard capacity for routine surface casing and intermediate cementing jobs
- Mid-shallow wells: Suitable for wells up to 3000m with moderate cement volumes
- Road-legal transport: Truck-mounted design for quick mobilization between well sites
- General oilfield service: Versatile unit for workover, completion, and remedial cementing operations
Operating sequence
The cementing operation follows these key steps:
- Site positioning: Truck or skid unit positioned at wellhead, suction and discharge lines connected
- Pre-job checks: Operator verifies fluid end condition, safety valves, and control system calibration
- Mix preparation: Mixing system prepares cement slurry to target density and specifications
- Pumping stage: Pump delivers slurry at controlled rate and pressure, operator monitors real-time data
- Displacement: After cement slurry, displacement fluid pushes cement to target depth
Do you need a dedicated batch mixer truck, or does the cementing truck's on-board mixer suffice?
A batch mixer (or batch plant) is a dedicated slurry mixing unit — it prepares large volumes of cement slurry in controlled batches, then delivers it to the cementing pump(s). The 16 m³ designation means the mixing hopper holds 16 m³ of slurry per batch. This is not the pump; it is the mixing equipment that feeds the pump.
Choose a dedicated batch mixer truck when:
- You are doing large-volume cement jobs (40+ m³ per stage). A typical cementing truck has an on-board mixing hopper of 1–1.5 m³, mixing slurry continuously as it pumps. For a 50 m³ primary cement job, a batch mixer prepares the entire slurry volume at a controlled density, then delivers it to the pump at a consistent rate. This gives better density control than continuous on-the-fly mixing.
- You are running multiple cementing pumps in parallel. On big jobs (deep wells, offshore), you might have 2–3 cementing pumps working at once. A single batch mixer feeds all pumps from one large, well-mixed slurry supply. This is standard practice for large primary cementing operations.
- Slurry density consistency matters. Batch mixing lets you recirculate the slurry in the mixing tank to fully homogenize it before pumping. On-the-fly mixing (on the cementing truck) is faster but less consistent. For jobs where density deviation of < 0.02 g/cm³ is required, batch mixing is the standard.
- Mobility between well locations is required. The truck-mounted version drives directly to the wellsite, no disassembly needed. Choose the trailer or skid version if you need larger capacity or stationary operation.
Batch mixer vs on-board mixing — when is on-board enough?
- On-board mixing is fine for: Small to medium jobs (< 20 m³ slurry), single-pump operations, and workover/squeeze cementing where volume is low and speed matters more than perfect density control.
- Dedicated batch mixer pays off on: Large primary cement jobs (> 40 m³), multi-pump operations, and any well where slurry density consistency is critical to job success.
Common selections
- Electric drive conversion: VFD electric motor drive for reduced fuel consumption and emissions
- Cold weather package: engine heaters, heated cabin, anti-freeze systems for -30°C operation
- Automated control system: PLC-based control with touchscreen HMI
- Data acquisition and recording: real-time pressure, rate, and force monitoring
- Remote diagnostic capability: remote troubleshooting and software updates
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete cementing spread for oil well cementing?
A: Yes. We can supply complete cementing spreads for oil well cementing operations: cementing trucks, batch mixers, cement tanks, and additive systems as a package, engineered to work together for onshore and offshore oilfield projects.
Q: Can you customize cementing units for deep well and high-pressure operations?
A: Yes. We customize cementing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need desert, cold-weather, or offshore configurations, send your site conditions and we will return a tailored cementing truck configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has been manufacturing cementing equipment since the 1980s, with over 500 cementing units delivered to oilfield operators in the Middle East, Central Asia, Africa, and Southeast Asia. Our cementing trucks and skids are API-certified and customized for well depths ranging from shallow to ultra-deep wells. We provide factory-direct pricing, global after-sales support, and on-site commissioning for your cementing operations.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.